Optimized for mobile roots, the PC version offers higher resolution textures and volumetric shadows while keeping minimum specs low. It is light on the CPU but requires a dedicated GPU for stable 1080p/60FPS gameplay.
This game has a built-in FPS cap of 60 FPS
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, frame rates range from 58 to 70 FPS depending on quality settings. At 1440p, frame rates range from 55 to 67 FPS. At 4K, frame rates range from 43 to 55 FPS.
The GeForce RTX 2060 SUPER is 64% above the recommended GPU (GeForce GTX 1060) for Genshin Impact. The Ryzen 7 9800X3D is 16% above the recommended CPU (Core i7).
At lower resolutions (all 1080p settings), the Ryzen 7 9800X3D sets the FPS ceiling. As graphical load increases at (all 1440p settings, all 4k settings), the GeForce RTX 2060 SUPER becomes the FPS-limiting side.
Approximated average price on current market:
Combo price: $625.38. At 1080p Ultra, this combo delivers 58 FPS, equivalent to 0.09 FPS per dollar.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p | 0.112 fps/$ | 0.104 fps/$ | 0.101 fps/$ | 0.093 fps/$ |
| 1440p | 0.107 fps/$ | 0.101 fps/$ | 0.096 fps/$ | 0.088 fps/$ |
| 4k | 0.088 fps/$ | 0.082 fps/$ | 0.077 fps/$ | 0.069 fps/$ |
* Table values represent FPS per Dollar (higher is better)
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages. Adjacent heavier settings are lightly stabilized to remove prediction jitter that would otherwise create impossible reversals.
At 4k medium, the GeForce RTX 2060 SUPER sets the ceiling at about 60 FPS, while the Ryzen 7 9800X3D has headroom up to 84 FPS. In this scenario, the GPU limits the CPU potential by 29% (FPS gap: 24 FPS). Overall distribution: GPU limits 8/12 cells, CPU limits 4/12, balanced 0/12.
Your GeForce RTX 2060 SUPER is the limiting side in the heaviest mismatch. This means part of the Ryzen 7 9800X3D frame-generation potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU Limits GPU 21% | CPU Limits GPU 21% | CPU Limits GPU 21% | CPU Limits GPU 21% |
| 1440p (2K QHD) | GPU Limits CPU 26% | GPU Limits CPU 26% | GPU Limits CPU 26% | GPU Limits CPU 26% |
| 4K (Ultra HD) | GPU Limits CPU 26% | GPU Limits CPU 29% | GPU Limits CPU 29% | GPU Limits CPU 29% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings and then monotonic-smoothed across heavier presets and resolutions, not generic utilization heuristics.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 16% above and your GPU is 64% above the recommended specs. High/Ultra at 1080p. Lower settings for higher resolutions.
+16%vsrecommended
+64%vsrecommended
+203%vsminimum
+470%vsminimum
The Ryzen 7 9800X3D and GeForce RTX 2060 SUPER will struggle to run Genshin Impact at smooth framerates. At 1080p Ultra, you can expect around 58 FPS which is classified as "playable". Consider lowering settings or upgrading your hardware.
This CPU + GPU combo costs approximately $625.38 ($465.38 CPU + $160 GPU). Since the GPU is the main limiting factor, investing in a stronger GPU will improve your framerates and overall value. For example, upgrading to the GeForce RTX 3070 Ti for around $599 (Rank #185 for value) could deliver noticeably better performance.
For Genshin Impact, upgrading the GPU would give you the most noticeable improvement. The GeForce RTX 2060 SUPER is the limiting factor here, while the Ryzen 7 9800X3D still has spare capacity. A more powerful GPU would unlock higher FPS, especially at higher resolutions and quality presets. GPU-limited at: 1440p low, 1440p medium, 1440p high, 1440p ultra, 4k low, 4k medium, 4k high, 4k ultra. CPU fully utilized at: 1080p low, 1080p medium, 1080p high, 1080p ultra.
Genshin Impact does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Genshin Impact requires at minimum a Core i5 (CPU) and GeForce GT 1030 (GPU) with 8 GB RAM and 100 GB storage. For the recommended experience, you need a Core i7 and GeForce GTX 1060 with 16 GB RAM. Your Ryzen 7 9800X3D and GeForce RTX 2060 SUPER both exceed the recommended specs, so you're well-positioned for a great experience.
These Genshin Impact FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
