Palworld
This 'Pokémon with guns' survival game runs on Unreal Engine. It is CPU-heavy due to AI simulation for the many creatures. Memory leaks can occur in long sessions, making 16GB of RAM a practical minimum.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, all quality settings exceed 135 FPS. At 1440p, all settings exceed 95 FPS. At 4K, frame rates range from 53 to 86 FPS.
The GeForce RTX 3080 Ti is 66% above the recommended GPU (GeForce RTX 2070) for Palworld. The Ryzen 7 9800X3D is 78% above the recommended CPU (Core i9-9900K).
The GeForce RTX 3080 Ti sets the FPS ceiling at all 1080p settings, all 1440p settings, all 4k settings, while the Ryzen 7 9800X3D still has additional frame-generation headroom.
Approximated average price on current market:
Combo price: $1015.38. At 1080p Ultra, this combo delivers 135 FPS, equivalent to 0.13 FPS per dollar.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p | 0.188 fps/$ | 0.175 fps/$ | 0.151 fps/$ | 0.133 fps/$ |
| 1440p | 0.137 fps/$ | 0.125 fps/$ | 0.112 fps/$ | 0.094 fps/$ |
| 4k | 0.085 fps/$ | 0.074 fps/$ | 0.062 fps/$ | 0.052 fps/$ |
* Table values represent FPS per Dollar (higher is better)
Affiliate Disclosure
ChipVERSUS is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. We may earn a commission on qualifying purchases made through our links. This comes at no additional cost to you and helps support our work in providing comprehensive PC building guides and tools.
Amazon and the Amazon logo are trademarks of Amazon.com, Inc. or its affiliates.
This chart answers a simple question: which upgrade is more likely to increase FPS first? In this case, the answer is clearly the GPU.
The largest gap appears at 4K Ultra, where the GeForce RTX 3080 Ti reaches about 53 FPS, while the Ryzen 7 9800X3D still has headroom up to roughly 120 FPS.
That means the GeForce RTX 3080 Ti is hitting its performance ceiling first, leaving a 56% gap versus the Ryzen 7 9800X3D's available headroom in the most unbalanced scenario. Across all tested settings, this pairing is GPU-limited in 12 out of 12 cases, with 0 CPU-limited and 0 balanced results.
Overall, this is a clearly GPU-bound combination in this game.
The GeForce RTX 3080 Ti is consistently the limiting part in this game, so upgrading the GPU is more likely to deliver a larger FPS gain than upgrading the CPU.
This chart shows which upgrade is more likely to unlock more FPS in each tested setting. The lower line represents the part that reaches its limit first. When the CPU and GPU lines stay close together, the system is more balanced. When the gap widens, one component is more clearly holding the other back. Hover any setting to inspect it.
The lower line is the current limiter. The closer the two lines are, the more balanced the CPU and GPU are for this game.
Each line represents an estimated FPS ceiling for one component, rather than live usage alone.
To estimate the CPU ceiling, we pair the Ryzen 7 9800X3D with GeForce RTX 5090, our current GPU anchor. To estimate the GPU ceiling, we pair the GeForce RTX 3080 Ti with Ryzen 9 9950X3D, our current CPU anchor.
The lower line indicates the current limiter, since that component reaches its FPS ceiling first. In most scenarios, that is also the part most likely to deliver the bigger performance uplift if upgraded first.
The percentage shown represents the gap between the two ceilings. In practical terms, it shows how much of the stronger component's potential is left unused because the weaker one becomes the bottleneck first.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 78% above and your GPU is 66% above the recommended specs. Ultra settings at 1080p, or High at 1440p/4K.
+78%vsrecommended
+66%vsrecommended
+417%vsminimum
+434%vsminimum
Yes, the Ryzen 7 9800X3D paired with the GeForce RTX 3080 Ti can run Palworld smoothly up to 1440p achieving around 95 FPS at Ultra quality. Your GPU is 66% above the recommended specs, and your CPU is 78% above the recommended requirements.
This CPU + GPU combo costs approximately $1,015.38 ($465.38 CPU + $550 GPU). Since the GPU is the main limiting factor, investing in a stronger GPU will improve your framerates and overall value. For example, upgrading to the GeForce RTX 4080 for around $1,199 (Rank #290 for value) could deliver noticeably better performance.
For Palworld, upgrading the GPU would usually give you the most noticeable improvement. In the Performance Limiter Analysis, the GeForce RTX 3080 Ti is the side that most often caps the frame rate, while the Ryzen 7 9800X3D still has additional headroom in the tested presets. If you want to unlock more of the pairing's current ceiling, a stronger graphics card like GeForce RTX 5090 D for around $1,999 would be the clearest next step. The main bottleneck appears on the GPU side. The largest gap shows up at 4K Ultra, where the GPU reaches about 53 FPS while the CPU still has headroom up to roughly 120 FPS. Across all tested settings, the distribution is 12/12 GPU-limited, 0/12 CPU-limited, and 0/12 balanced.
Palworld does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Palworld requires at minimum a Core i5-3570K (CPU) and GeForce GTX 1050 (GPU) with 16 GB RAM and 40 GB (SSD) storage. For the recommended experience, you need a Core i9-9900K and GeForce RTX 2070 with 32 GB RAM. Your Ryzen 7 9800X3D and GeForce RTX 3080 Ti both exceed the recommended specs, so you're well-positioned for a great experience.
These Palworld FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
