Built for massive sieges, this MMO creates a significant CPU bottleneck in large battles. 16GB of RAM is the minimum, setting a standard for next-gen MMOs.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, all quality settings exceed 151 FPS, suitable for 144Hz+ monitors. At 1440p, all settings exceed 132 FPS. At 4K, all settings exceed 102 FPS.
The GeForce RTX 3090 Ti is 119% above the recommended GPU (GeForce GTX 1660) for Throne and Liberty. The Ryzen 7 9800X3D is 105% above the recommended CPU (Core i5-11600K).
The GeForce RTX 3090 Ti sets the FPS ceiling at 4k ultra, while the Ryzen 7 9800X3D still has additional frame-generation headroom. The FPS ceiling is closely matched at all 1080p settings, all 1440p settings, 4k (low/medium/high).
Approximated average price on current market:
Combo price: $1565.38. At 1080p Ultra, this combo delivers 151 FPS, equivalent to 0.1 FPS per dollar.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p | 0.170 fps/$ | 0.149 fps/$ | 0.112 fps/$ | 0.096 fps/$ |
| 1440p | 0.139 fps/$ | 0.130 fps/$ | 0.098 fps/$ | 0.084 fps/$ |
| 4k | 0.116 fps/$ | 0.105 fps/$ | 0.074 fps/$ | 0.065 fps/$ |
* Table values represent FPS per Dollar (higher is better)
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages. Adjacent heavier settings are lightly stabilized to remove prediction jitter that would otherwise create impossible reversals.
At 4k ultra, the GeForce RTX 3090 Ti sets the ceiling at about 112 FPS, while the Ryzen 7 9800X3D has headroom up to 122 FPS. In this scenario, the GPU limits the CPU potential by 8% (FPS gap: 10 FPS). Overall distribution: GPU limits 1/12 cells, CPU limits 1/12, balanced 10/12.
The Ryzen 7 9800X3D and GeForce RTX 3090 Ti stay close in effective frame-generation ceiling across most presets, so neither side consistently suppresses the other by a large margin.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU Limits GPU 6% | Balanced | Balanced | Balanced |
| 1440p (2K QHD) | Balanced | Balanced | Balanced | Balanced |
| 4K (Ultra HD) | Balanced | Balanced | Balanced | GPU Limits CPU 8% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings and then monotonic-smoothed across heavier presets and resolutions, not generic utilization heuristics.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 105% above and your GPU is 119% above the recommended specs. Ultra settings at 1080p, or High at 1440p/4K.
+105%vsrecommended
+119%vsrecommended
+204%vsminimum
+379%vsminimum
Yes, the Ryzen 7 9800X3D paired with the GeForce RTX 3090 Ti can run Throne and Liberty smoothly up to 4k achieving around 102 FPS at Ultra quality. Your GPU is 119% above the recommended specs, and your CPU is 105% above the recommended requirements.
This CPU + GPU combo costs approximately $1565.38 ($465.38 CPU + $1100 GPU). Your GeForce RTX 3090 Ti provides phenomenal top-tier performance but at a premium enthusiast price. Since you are essentially at the ceiling of current hardware capabilities, there are no meaningful performance upgrades available. However, if you wanted a more cost-effective build that still delivers a great experience, you could theoretically step down to a high-end card with a significantly better value rating. For example, upgrading to the GeForce RTX 5090 D for around $1999 (Rank #374 for value) could deliver noticeably better performance.
Your GeForce RTX 3090 Ti is already a top-tier graphics card. While it's technically the limiting factor here (which means you are fully utilizing your GPU's visual horsepower exactly as intended), there is no meaningful upgrade path that would drastically improve your Throne and Liberty performance right now. GPU fully utilized at: 4k ultra.
Throne and Liberty does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Throne and Liberty requires at minimum a Core i5-7700 (CPU) and GeForce GTX 960 (GPU) with 16 GB RAM and 63 GB storage. For the recommended experience, you need a Core i5-11600K and GeForce GTX 1660 with 16 GB RAM. Your Ryzen 7 9800X3D and GeForce RTX 3090 Ti both exceed the recommended specs, so you're well-positioned for a great experience.
These Throne and Liberty FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
