A Source engine sandbox where performance depends entirely on the mods and contraptions you spawn. RAM errors are common on systems with only 4GB.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, all quality settings exceed 388 FPS, suitable for 144Hz+ monitors. At 1440p, all settings exceed 375 FPS. At 4K, all settings exceed 256 FPS.
The GeForce RTX 4060 Ti 16GB is 586% above the recommended GPU (GeForce GTX 750) for Garry's Mod. The Ryzen 7 9800X3D is 203% above the recommended CPU (Core i5).
The GeForce RTX 4060 Ti 16GB sets the FPS ceiling at all 1080p settings, all 1440p settings, all 4k settings, while the Ryzen 7 9800X3D still has additional frame-generation headroom.
Approximated average price on current market:
Combo price: $914.38. At 1080p Ultra, this combo delivers 388 FPS, equivalent to 0.42 FPS per dollar.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p | 0.505 fps/$ | 0.472 fps/$ | 0.447 fps/$ | 0.424 fps/$ |
| 1440p | 0.472 fps/$ | 0.459 fps/$ | 0.436 fps/$ | 0.410 fps/$ |
| 4k | 0.385 fps/$ | 0.361 fps/$ | 0.323 fps/$ | 0.280 fps/$ |
* Table values represent FPS per Dollar (higher is better)
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages. Adjacent heavier settings are lightly stabilized to remove prediction jitter that would otherwise create impossible reversals.
At 4k ultra, the GeForce RTX 4060 Ti 16GB sets the ceiling at about 256 FPS, while the Ryzen 7 9800X3D has headroom up to 373 FPS. In this scenario, the GPU limits the CPU potential by 31% (FPS gap: 117 FPS). Overall distribution: GPU limits 12/12 cells, CPU limits 0/12, balanced 0/12.
Your GeForce RTX 4060 Ti 16GB is the limiting side in the heaviest mismatch. This means part of the Ryzen 7 9800X3D frame-generation potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | GPU Limits CPU 17% | GPU Limits CPU 17% | GPU Limits CPU 18% | GPU Limits CPU 23% |
| 1440p (2K QHD) | GPU Limits CPU 21% | GPU Limits CPU 21% | GPU Limits CPU 22% | GPU Limits CPU 28% |
| 4K (Ultra HD) | GPU Limits CPU 21% | GPU Limits CPU 21% | GPU Limits CPU 23% | GPU Limits CPU 31% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings and then monotonic-smoothed across heavier presets and resolutions, not generic utilization heuristics.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 203% above and your GPU is 586% above the recommended specs. Ultra settings at 1080p, or High at 1440p/4K.
+203%vsrecommended
+586%vsrecommended
+1232%vsminimum
+6783%vsminimum
Yes, the Ryzen 7 9800X3D paired with the GeForce RTX 4060 Ti 16GB can run Garry's Mod smoothly up to 4k achieving around 256 FPS at Ultra quality. Your GPU is 586% above the recommended specs, and your CPU is 203% above the recommended requirements.
This CPU + GPU combo costs approximately $914.38 ($465.38 CPU + $449 GPU). Since the GPU is the main limiting factor, investing in a stronger GPU will improve your framerates and overall value. For example, upgrading to the GeForce RTX 4070 Ti for around $799 (Rank #248 for value) could deliver noticeably better performance.
For Garry's Mod, upgrading the GPU would give you the most noticeable improvement. The GeForce RTX 4060 Ti 16GB is the limiting factor here, while the Ryzen 7 9800X3D still has spare capacity. A more powerful GPU would unlock higher FPS, especially at higher resolutions and quality presets. GPU-limited at: 1080p low, 1080p medium, 1080p high, 1080p ultra, 1440p low, 1440p medium, 1440p high, 1440p ultra, 4k low, 4k medium, 4k high, 4k ultra.
Garry's Mod does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Garry's Mod requires at minimum a Pentium 4 (CPU) and GeForce 6 series (GPU) with 4 GB RAM and 5 GB storage. For the recommended experience, you need a Core i5 and GeForce GTX 750 with 8 GB RAM. Your Ryzen 7 9800X3D and GeForce RTX 4060 Ti 16GB both exceed the recommended specs, so you're well-positioned for a great experience.
These Garry's Mod FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
