Built for massive sieges, this MMO creates a significant CPU bottleneck in large battles. 16GB of RAM is the minimum, setting a standard for next-gen MMOs.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, all quality settings exceed 108 FPS. At 1440p, all settings exceed 100 FPS. At 4K, all settings exceed 72 FPS.
The GeForce RTX 5070 Ti is 142% above the recommended GPU (GeForce GTX 1660) for Throne and Liberty. The Ryzen 7 9800X3D is 105% above the recommended CPU (Core i5-11600K).
The GeForce RTX 5070 Ti sets the FPS ceiling at all 1080p settings, all 1440p settings, all 4k settings, while the Ryzen 7 9800X3D still has additional frame-generation headroom.
Approximated average price on current market:
Combo price: $1315.38. At 1080p Ultra, this combo delivers 108 FPS, equivalent to 0.08 FPS per dollar.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p | 0.152 fps/$ | 0.126 fps/$ | 0.090 fps/$ | 0.082 fps/$ |
| 1440p | 0.129 fps/$ | 0.113 fps/$ | 0.083 fps/$ | 0.076 fps/$ |
| 4k | 0.102 fps/$ | 0.087 fps/$ | 0.060 fps/$ | 0.055 fps/$ |
* Table values represent FPS per Dollar (higher is better)
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages. Adjacent heavier settings are lightly stabilized to remove prediction jitter that would otherwise create impossible reversals.
At 4k ultra, the GeForce RTX 5070 Ti sets the ceiling at about 77 FPS, while the Ryzen 7 9800X3D has headroom up to 123 FPS. In this scenario, the GPU limits the CPU potential by 37% (FPS gap: 46 FPS). Overall distribution: GPU limits 12/12 cells, CPU limits 0/12, balanced 0/12.
Your GeForce RTX 5070 Ti is the limiting side in the heaviest mismatch. This means part of the Ryzen 7 9800X3D frame-generation potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | GPU Limits CPU 23% | GPU Limits CPU 29% | GPU Limits CPU 35% | GPU Limits CPU 35% |
| 1440p (2K QHD) | GPU Limits CPU 24% | GPU Limits CPU 29% | GPU Limits CPU 35% | GPU Limits CPU 35% |
| 4K (Ultra HD) | GPU Limits CPU 29% | GPU Limits CPU 31% | GPU Limits CPU 36% | GPU Limits CPU 37% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings and then monotonic-smoothed across heavier presets and resolutions, not generic utilization heuristics.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 105% above and your GPU is 142% above the recommended specs. Ultra settings at 1080p, or High at 1440p/4K.
+105%vsrecommended
+142%vsrecommended
+204%vsminimum
+431%vsminimum
Yes, the Ryzen 7 9800X3D paired with the GeForce RTX 5070 Ti can run Throne and Liberty smoothly up to 4k achieving around 72 FPS at Ultra quality. Your GPU is 142% above the recommended specs, and your CPU is 105% above the recommended requirements.
This CPU + GPU combo costs approximately $1315.38 ($465.38 CPU + $850 GPU). Your GeForce RTX 5070 Ti provides phenomenal top-tier performance but at a premium enthusiast price. Since you are essentially at the ceiling of current hardware capabilities, there are no meaningful performance upgrades available. However, if you wanted a more cost-effective build that still delivers a great experience, you could theoretically step down to a high-end card with a significantly better value rating. For example, upgrading to the GeForce RTX 5090 D for around $1999 (Rank #374 for value) could deliver noticeably better performance.
Your GeForce RTX 5070 Ti is already a top-tier graphics card. While it's technically the limiting factor here (which means you are fully utilizing your GPU's visual horsepower exactly as intended), there is no meaningful upgrade path that would drastically improve your Throne and Liberty performance right now. GPU fully utilized at: 1080p low, 1080p medium, 1080p high, 1080p ultra, 1440p low, 1440p medium, 1440p high, 1440p ultra, 4k low, 4k medium, 4k high, 4k ultra.
Throne and Liberty does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Throne and Liberty requires at minimum a Core i5-7700 (CPU) and GeForce GTX 960 (GPU) with 16 GB RAM and 63 GB storage. For the recommended experience, you need a Core i5-11600K and GeForce GTX 1660 with 16 GB RAM. Your Ryzen 7 9800X3D and GeForce RTX 5070 Ti both exceed the recommended specs, so you're well-positioned for a great experience.
These Throne and Liberty FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
