Built for massive sieges, this MMO creates a significant CPU bottleneck in large battles. 16GB of RAM is the minimum, setting a standard for next-gen MMOs.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, all quality settings exceed 168 FPS, suitable for 144Hz+ monitors. At 1440p, all settings exceed 149 FPS. At 4K, all settings exceed 118 FPS.
The GeForce RTX 5090 D v2 is 126% above the recommended GPU (GeForce GTX 1660) for Throne and Liberty. The Ryzen 7 9800X3D is 105% above the recommended CPU (Core i5-11600K).
The Ryzen 7 9800X3D sets the FPS ceiling at 1080p (low/medium), 1440p (low/medium/high), 4k (low/medium), while the GeForce RTX 5090 D v2 still has headroom. The FPS ceiling is closely matched at 1080p (high/ultra), 1440p ultra, 4k (high/ultra).
Approximated average price on current market:
Combo price: $4551.82. At 1080p Ultra, this combo delivers 168 FPS, equivalent to 0.04 FPS per dollar.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p | 0.065 fps/$ | 0.057 fps/$ | 0.043 fps/$ | 0.037 fps/$ |
| 1440p | 0.053 fps/$ | 0.049 fps/$ | 0.038 fps/$ | 0.033 fps/$ |
| 4k | 0.044 fps/$ | 0.040 fps/$ | 0.029 fps/$ | 0.026 fps/$ |
* Table values represent FPS per Dollar (higher is better)
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages. Adjacent heavier settings are lightly stabilized to remove prediction jitter that would otherwise create impossible reversals.
At 1080p low, the Ryzen 7 9800X3D sets the ceiling at about 321 FPS, while the GeForce RTX 5090 D v2 could reach 364 FPS. In this scenario, the CPU limits the GPU potential by 12% (FPS gap: 43 FPS). Overall distribution: CPU limits 8/12 cells, GPU limits 0/12, balanced 4/12.
The Ryzen 7 9800X3D and GeForce RTX 5090 D v2 stay close in effective frame-generation ceiling across most presets, so neither side consistently suppresses the other by a large margin.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU Limits GPU 12% | CPU Limits GPU 9% | CPU Limits GPU 6% | Balanced |
| 1440p (2K QHD) | CPU Limits GPU 7% | CPU Limits GPU 7% | CPU Limits GPU 6% | Balanced |
| 4K (Ultra HD) | CPU Limits GPU 6% | CPU Limits GPU 6% | Balanced | Balanced |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings and then monotonic-smoothed across heavier presets and resolutions, not generic utilization heuristics.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 105% above and your GPU is 126% above the recommended specs. Ultra settings at 1080p, or High at 1440p/4K.
+105%vsrecommended
+126%vsrecommended
+204%vsminimum
+396%vsminimum
Yes, the Ryzen 7 9800X3D paired with the GeForce RTX 5090 D v2 can run Throne and Liberty smoothly up to 4k achieving around 118 FPS at Ultra quality. Your GPU is 126% above the recommended specs, and your CPU is 105% above the recommended requirements.
This CPU + GPU combo costs approximately $4551.82 ($465.38 CPU + $4086.44 GPU). Your Ryzen 7 9800X3D provides phenomenal top-tier performance but at a premium enthusiast price. Since you are essentially at the ceiling of current hardware capabilities, there are no meaningful performance upgrades available. However, if you wanted a more cost-effective build that still delivers a great experience, you could theoretically step down to a high-end processor with a significantly better value rating. For example, the Ryzen 9 9950X is a great upgrade option for around $649 (Rank #4 for value).
Your Ryzen 7 9800X3D is already an incredibly powerful processor. While it's technically the first component to hit its limit (which is completely normal in state-of-the-art builds), there is no meaningful upgrade path that would drastically improve your Throne and Liberty performance right now. CPU fully utilized at: 1080p low, 1080p medium, 1440p low, 1440p medium, 1440p high, 4k low, 4k medium.
Throne and Liberty does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Throne and Liberty requires at minimum a Core i5-7700 (CPU) and GeForce GTX 960 (GPU) with 16 GB RAM and 63 GB storage. For the recommended experience, you need a Core i5-11600K and GeForce GTX 1660 with 16 GB RAM. Your Ryzen 7 9800X3D and GeForce RTX 5090 D v2 both exceed the recommended specs, so you're well-positioned for a great experience.
These Throne and Liberty FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
