Unlike shooters, Naraka focuses on melee combat with fluid animations. The game is visually dense and supports DLSS, which is vital for high frame rates at resolutions above 1080p. An SSD is critical for map loading, and 16GB of RAM is recommended for smooth gameplay.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, all quality settings exceed 147 FPS, suitable for 144Hz+ monitors. At 1440p, all settings exceed 124 FPS. At 4K, all settings exceed 85 FPS.
The Quadro GP100 is 36% above the recommended GPU (GeForce GTX 1060) for Naraka: Bladepoint. The Ryzen 7 9800X3D is 204% above the recommended CPU (Core i7-7700).
At lower resolutions (1080p (low/medium/high), 1440p (low/medium)), the Ryzen 7 9800X3D sets the FPS ceiling. As graphical load increases at (1440p ultra, all 4k settings), the Quadro GP100 becomes the FPS-limiting side. The FPS ceiling is closely matched at 1080p ultra, 1440p high.
Approximated average price on current market:
Combo price: $1800.38. At 1080p Ultra, this combo delivers 147 FPS, equivalent to 0.08 FPS per dollar.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p | 0.133 fps/$ | 0.109 fps/$ | 0.093 fps/$ | 0.082 fps/$ |
| 1440p | 0.113 fps/$ | 0.093 fps/$ | 0.078 fps/$ | 0.069 fps/$ |
| 4k | 0.071 fps/$ | 0.062 fps/$ | 0.050 fps/$ | 0.047 fps/$ |
* Table values represent FPS per Dollar (higher is better)
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages. Adjacent heavier settings are lightly stabilized to remove prediction jitter that would otherwise create impossible reversals.
At 1080p low, the Ryzen 7 9800X3D sets the ceiling at about 306 FPS, while the Quadro GP100 could reach 385 FPS. In this scenario, the CPU limits the GPU potential by 21% (FPS gap: 79 FPS). Overall distribution: CPU limits 5/12 cells, GPU limits 5/12, balanced 2/12.
Your Ryzen 7 9800X3D is the limiting side in the heaviest mismatch. This means part of the Quadro GP100 rendering potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU Limits GPU 21% | CPU Limits GPU 21% | CPU Limits GPU 9% | Balanced |
| 1440p (2K QHD) | CPU Limits GPU 11% | CPU Limits GPU 11% | Balanced | GPU Limits CPU 10% |
| 4K (Ultra HD) | GPU Limits CPU 8% | GPU Limits CPU 8% | GPU Limits CPU 13% | GPU Limits CPU 13% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings and then monotonic-smoothed across heavier presets and resolutions, not generic utilization heuristics.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 204% above and your GPU is 36% above the recommended specs. High/Ultra at 1080p. Lower settings for higher resolutions.
+204%vsrecommended
+36%vsrecommended
+713%vsminimum
+252%vsminimum
Yes, the Ryzen 7 9800X3D paired with the Quadro GP100 can run Naraka: Bladepoint smoothly up to 4k achieving around 85 FPS at Ultra quality. Your GPU is 36% above the recommended specs, and your CPU is 204% above the recommended requirements.
This CPU + GPU combo costs approximately $1800.38 ($465.38 CPU + $1335 GPU). Your Quadro GP100 is currently the main performance bottleneck and its market value ($1335) is actually higher than newer, faster alternatives. Trading it or upgrading could yield immediate profit and performance gains. For example, upgrading to the Quadro RTX 4000 (móvel) for around $900 (Rank #105 for value) could deliver noticeably better performance while costing less than your current GPU.
For Naraka: Bladepoint, upgrading the GPU would give you the most noticeable improvement. The Quadro GP100 is the limiting factor here, while the Ryzen 7 9800X3D still has spare capacity. A more powerful GPU would unlock higher FPS, especially at higher resolutions and quality presets. GPU-limited at: 1440p ultra, 4k low, 4k medium, 4k high, 4k ultra. CPU fully utilized at: 1080p low, 1080p medium, 1080p high, 1440p low, 1440p medium.
Naraka: Bladepoint does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Naraka: Bladepoint requires at minimum a Core i5-4460 (CPU) and GeForce GTX 750 Ti (GPU) with 8 GB RAM and 20 GB storage. For the recommended experience, you need a Core i7-7700 and GeForce GTX 1060 with 16 GB RAM. Your Ryzen 7 9800X3D and Quadro GP100 both exceed the recommended specs, so you're well-positioned for a great experience.
These Naraka: Bladepoint FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
