A heavy RE Engine title using advanced geometry and global illumination. It has sparked discussion by listing Frame Generation as a requirement for 60 FPS in its recommended specs. An SSD is mandatory.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, frame rates range from 22 to 43 FPS depending on quality settings. At 1440p, frame rates range from 19 to 35 FPS. At 4K, frame rates range from 13 to 21 FPS.
The Quadro K4000 is 80% below minimum GPU requirement for Monster Hunter Wilds. The Ryzen 7 9800X3D is 105% above the recommended CPU (Core i5-11600K).
The Quadro K4000 sets the FPS ceiling at all 1080p settings, all 1440p settings, all 4k settings, while the Ryzen 7 9800X3D still has additional frame-generation headroom.
Approximated average price on current market:
Combo price: $565.38. At 1080p Ultra, this combo delivers 22 FPS, equivalent to 0.04 FPS per dollar.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p | 0.076 fps/$ | 0.064 fps/$ | 0.048 fps/$ | 0.039 fps/$ |
| 1440p | 0.062 fps/$ | 0.051 fps/$ | 0.042 fps/$ | 0.034 fps/$ |
| 4k | 0.037 fps/$ | 0.032 fps/$ | 0.028 fps/$ | 0.023 fps/$ |
* Table values represent FPS per Dollar (higher is better)
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages. Adjacent heavier settings are lightly stabilized to remove prediction jitter that would otherwise create impossible reversals.
At 1080p ultra, the Quadro K4000 sets the ceiling at about 23 FPS, while the Ryzen 7 9800X3D has headroom up to 116 FPS. In this scenario, the GPU limits the CPU potential by 80% (FPS gap: 93 FPS). Overall distribution: GPU limits 12/12 cells, CPU limits 0/12, balanced 0/12.
Your Quadro K4000 is the limiting side in the heaviest mismatch. This means part of the Ryzen 7 9800X3D frame-generation potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | GPU Limits CPU 79% | GPU Limits CPU 79% | GPU Limits CPU 79% | GPU Limits CPU 80% |
| 1440p (2K QHD) | GPU Limits CPU 79% | GPU Limits CPU 79% | GPU Limits CPU 79% | GPU Limits CPU 80% |
| 4K (Ultra HD) | GPU Limits CPU 79% | GPU Limits CPU 79% | GPU Limits CPU 79% | GPU Limits CPU 80% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings and then monotonic-smoothed across heavier presets and resolutions, not generic utilization heuristics.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your hardware is below minimum requirements. GPU is the limiting factor (80% below minimum). Expect performance issues. Low settings recommended.
+105%vsrecommended
-86%vsrecommended
+126%vsminimum
-80%vsminimum
The Ryzen 7 9800X3D and Quadro K4000 will struggle to run Monster Hunter Wilds at smooth framerates. At 1080p Ultra, you can expect around 22 FPS which is classified as "struggling". Consider lowering settings or upgrading your hardware.
This CPU + GPU combo costs approximately $565.38 ($465.38 CPU + $100 GPU). Since the GPU is the main limiting factor, investing in a stronger GPU will improve your framerates and overall value. For example, upgrading to the Radeon Pro Vega 56 for around $399 (Rank #97 for value) could deliver noticeably better performance.
For Monster Hunter Wilds, upgrading the GPU would give you the most noticeable improvement. The Quadro K4000 is the limiting factor here, while the Ryzen 7 9800X3D still has spare capacity. A more powerful GPU would unlock higher FPS, especially at higher resolutions and quality presets. GPU-limited at: 1080p low, 1080p medium, 1080p high, 1080p ultra, 1440p low, 1440p medium, 1440p high, 1440p ultra, 4k low, 4k medium, 4k high, 4k ultra.
Monster Hunter Wilds does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Monster Hunter Wilds requires at minimum a Core i5-10600 (CPU) and GeForce GTX 1660 Super (GPU) with 16 GB RAM and 140 GB (SSD) storage. For the recommended experience, you need a Core i5-11600K and GeForce RTX 2070 Super with 16 GB RAM. Your hardware falls below the minimum requirements for this game, which may result in poor performance.
These Monster Hunter Wilds FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
