Built for massive sieges, this MMO creates a significant CPU bottleneck in large battles. 16GB of RAM is the minimum, setting a standard for next-gen MMOs.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, frame rates range from 33 to 73 FPS depending on quality settings. At 1440p, frame rates range from 27 to 55 FPS. At 4K, frame rates range from 17 to 34 FPS.
The Quadro M5500 is 41% below recommended, but 29% above minimum for Throne and Liberty. The Ryzen 7 9800X3D is 105% above the recommended CPU (Core i5-11600K).
The Quadro M5500 sets the FPS ceiling at all 1080p settings, all 1440p settings, all 4k settings, while the Ryzen 7 9800X3D still has additional frame-generation headroom.
Approximated average price on current market:
Combo price: $665.38. At 1080p Ultra, this combo delivers 33 FPS, equivalent to 0.05 FPS per dollar.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p | 0.110 fps/$ | 0.084 fps/$ | 0.069 fps/$ | 0.050 fps/$ |
| 1440p | 0.083 fps/$ | 0.071 fps/$ | 0.059 fps/$ | 0.041 fps/$ |
| 4k | 0.051 fps/$ | 0.044 fps/$ | 0.033 fps/$ | 0.026 fps/$ |
* Table values represent FPS per Dollar (higher is better)
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages. Adjacent heavier settings are lightly stabilized to remove prediction jitter that would otherwise create impossible reversals.
At 4k ultra, the Quadro M5500 sets the ceiling at about 19 FPS, while the Ryzen 7 9800X3D has headroom up to 122 FPS. In this scenario, the GPU limits the CPU potential by 84% (FPS gap: 103 FPS). Overall distribution: GPU limits 12/12 cells, CPU limits 0/12, balanced 0/12.
Your Quadro M5500 is the limiting side in the heaviest mismatch. This means part of the Ryzen 7 9800X3D frame-generation potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | GPU Limits CPU 73% | GPU Limits CPU 76% | GPU Limits CPU 76% | GPU Limits CPU 79% |
| 1440p (2K QHD) | GPU Limits CPU 76% | GPU Limits CPU 77% | GPU Limits CPU 77% | GPU Limits CPU 80% |
| 4K (Ultra HD) | GPU Limits CPU 82% | GPU Limits CPU 83% | GPU Limits CPU 83% | GPU Limits CPU 84% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings and then monotonic-smoothed across heavier presets and resolutions, not generic utilization heuristics.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 105% below recommended and your GPU is 41% below recommended, but both meet minimum specs. Playable at Low/Medium settings, 1080p or below.
+105%vsrecommended
-41%vsrecommended
+204%vsminimum
+29%vsminimum
The Ryzen 7 9800X3D and Quadro M5500 will struggle to run Throne and Liberty at smooth framerates. At 1080p Ultra, you can expect around 33 FPS which is classified as "playable". Consider lowering settings or upgrading your hardware.
This CPU + GPU combo costs approximately $665.38 ($465.38 CPU + $200 GPU). Since the GPU is the main limiting factor, investing in a stronger GPU will improve your framerates and overall value. For example, upgrading to the Quadro RTX 4000 (móvel) for around $900 (Rank #105 for value) could deliver noticeably better performance.
For Throne and Liberty, upgrading the GPU would give you the most noticeable improvement. The Quadro M5500 is the limiting factor here, while the Ryzen 7 9800X3D still has spare capacity. A more powerful GPU would unlock higher FPS, especially at higher resolutions and quality presets. GPU-limited at: 1080p low, 1080p medium, 1080p high, 1080p ultra, 1440p low, 1440p medium, 1440p high, 1440p ultra, 4k low, 4k medium, 4k high, 4k ultra.
Throne and Liberty does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Throne and Liberty requires at minimum a Core i5-7700 (CPU) and GeForce GTX 960 (GPU) with 16 GB RAM and 63 GB storage. For the recommended experience, you need a Core i5-11600K and GeForce GTX 1660 with 16 GB RAM. Your setup meets the minimum requirements but falls short of the recommended specs. You may need to lower some settings for smooth performance.
These Throne and Liberty FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
