Unlike shooters, Naraka focuses on melee combat with fluid animations. The game is visually dense and supports DLSS, which is vital for high frame rates at resolutions above 1080p. An SSD is critical for map loading, and 16GB of RAM is recommended for smooth gameplay.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, all quality settings exceed 82 FPS. At 1440p, all settings exceed 70 FPS. At 4K, frame rates range from 45 to 77 FPS.
The Radeon RX 580 2048SP is 24% below recommended, but 96% above minimum for Naraka: Bladepoint. The Ryzen 7 9800X3D is 204% above the recommended CPU (Core i7-7700).
The Radeon RX 580 2048SP sets the FPS ceiling at all 1080p settings, all 1440p settings, all 4k settings, while the Ryzen 7 9800X3D still has additional frame-generation headroom.
Approximated average price on current market:
Combo price: $525.38. At 1080p Ultra, this combo delivers 82 FPS, equivalent to 0.16 FPS per dollar.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p | 0.316 fps/$ | 0.242 fps/$ | 0.192 fps/$ | 0.156 fps/$ |
| 1440p | 0.270 fps/$ | 0.207 fps/$ | 0.160 fps/$ | 0.133 fps/$ |
| 4k | 0.147 fps/$ | 0.122 fps/$ | 0.091 fps/$ | 0.086 fps/$ |
* Table values represent FPS per Dollar (higher is better)
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages. Adjacent heavier settings are lightly stabilized to remove prediction jitter that would otherwise create impossible reversals.
At 4k high, the Radeon RX 580 2048SP sets the ceiling at about 53 FPS, while the Ryzen 7 9800X3D has headroom up to 121 FPS. In this scenario, the GPU limits the CPU potential by 56% (FPS gap: 68 FPS). Overall distribution: GPU limits 12/12 cells, CPU limits 0/12, balanced 0/12.
Your Radeon RX 580 2048SP is the limiting side in the heaviest mismatch. This means part of the Ryzen 7 9800X3D frame-generation potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | GPU Limits CPU 25% | GPU Limits CPU 27% | GPU Limits CPU 39% | GPU Limits CPU 49% |
| 1440p (2K QHD) | GPU Limits CPU 30% | GPU Limits CPU 33% | GPU Limits CPU 45% | GPU Limits CPU 51% |
| 4K (Ultra HD) | GPU Limits CPU 50% | GPU Limits CPU 51% | GPU Limits CPU 56% | GPU Limits CPU 56% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings and then monotonic-smoothed across heavier presets and resolutions, not generic utilization heuristics.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 204% below recommended and your GPU is 24% below recommended, but both meet minimum specs. Playable at Low/Medium settings, 1080p or below.
+204%vsrecommended
-24%vsrecommended
+713%vsminimum
+96%vsminimum
Yes, the Ryzen 7 9800X3D paired with the Radeon RX 580 2048SP can run Naraka: Bladepoint smoothly up to 1440p achieving around 70 FPS at Ultra quality. Your GPU is 24% below the recommended specs, and your CPU is 204% above the recommended requirements.
This CPU + GPU combo costs approximately $525.38 ($465.38 CPU + $60 GPU). Since the GPU is the main limiting factor, investing in a stronger GPU will improve your framerates and overall value. For example, upgrading to the GeForce GTX 980 for around $549 (Rank #79 for value) could deliver noticeably better performance.
For Naraka: Bladepoint, upgrading the GPU would give you the most noticeable improvement. The Radeon RX 580 2048SP is the limiting factor here, while the Ryzen 7 9800X3D still has spare capacity. A more powerful GPU would unlock higher FPS, especially at higher resolutions and quality presets. GPU-limited at: 1080p low, 1080p medium, 1080p high, 1080p ultra, 1440p low, 1440p medium, 1440p high, 1440p ultra, 4k low, 4k medium, 4k high, 4k ultra.
Naraka: Bladepoint does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Naraka: Bladepoint requires at minimum a Core i5-4460 (CPU) and GeForce GTX 750 Ti (GPU) with 8 GB RAM and 20 GB storage. For the recommended experience, you need a Core i7-7700 and GeForce GTX 1060 with 16 GB RAM. Your setup meets the minimum requirements but falls short of the recommended specs. You may need to lower some settings for smooth performance.
These Naraka: Bladepoint FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
