Unlike shooters, Naraka focuses on melee combat with fluid animations. The game is visually dense and supports DLSS, which is vital for high frame rates at resolutions above 1080p. An SSD is critical for map loading, and 16GB of RAM is recommended for smooth gameplay.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, all quality settings exceed 169 FPS, suitable for 144Hz+ monitors. At 1440p, all settings exceed 142 FPS. At 4K, all settings exceed 97 FPS.
The Radeon RX 6950 XT is 179% above the recommended GPU (GeForce GTX 1060) for Naraka: Bladepoint. The Ryzen 7 9800X3D is 204% above the recommended CPU (Core i7-7700).
The Ryzen 7 9800X3D sets the FPS ceiling at all 1080p settings, 1440p (low/medium/high), 4k (low/medium), while the Radeon RX 6950 XT still has headroom. The FPS ceiling is closely matched at 1440p ultra, 4k (high/ultra).
Approximated average price on current market:
Combo price: $1315.38. At 1080p Ultra, this combo delivers 169 FPS, equivalent to 0.13 FPS per dollar.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p | 0.208 fps/$ | 0.169 fps/$ | 0.144 fps/$ | 0.128 fps/$ |
| 1440p | 0.175 fps/$ | 0.141 fps/$ | 0.122 fps/$ | 0.108 fps/$ |
| 4k | 0.114 fps/$ | 0.097 fps/$ | 0.081 fps/$ | 0.074 fps/$ |
* Table values represent FPS per Dollar (higher is better)
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages. Adjacent heavier settings are lightly stabilized to remove prediction jitter that would otherwise create impossible reversals.
At 1080p low, the Ryzen 7 9800X3D sets the ceiling at about 306 FPS, while the Radeon RX 6950 XT could reach 466 FPS. In this scenario, the CPU limits the GPU potential by 34% (FPS gap: 160 FPS). Overall distribution: CPU limits 9/12 cells, GPU limits 0/12, balanced 3/12.
Your Ryzen 7 9800X3D is the limiting side in the heaviest mismatch. This means part of the Radeon RX 6950 XT rendering potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU Limits GPU 34% | CPU Limits GPU 34% | CPU Limits GPU 26% | CPU Limits GPU 22% |
| 1440p (2K QHD) | CPU Limits GPU 21% | CPU Limits GPU 21% | CPU Limits GPU 8% | Balanced |
| 4K (Ultra HD) | CPU Limits GPU 8% | CPU Limits GPU 7% | Balanced | Balanced |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings and then monotonic-smoothed across heavier presets and resolutions, not generic utilization heuristics.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 204% above and your GPU is 179% above the recommended specs. Ultra settings at 1080p, or High at 1440p/4K.
+204%vsrecommended
+179%vsrecommended
+713%vsminimum
+620%vsminimum
Yes, the Ryzen 7 9800X3D paired with the Radeon RX 6950 XT can run Naraka: Bladepoint smoothly up to 4k achieving around 97 FPS at Ultra quality. Your GPU is 179% above the recommended specs, and your CPU is 204% above the recommended requirements.
This CPU + GPU combo costs approximately $1315.38 ($465.38 CPU + $850 GPU). Your Ryzen 7 9800X3D provides phenomenal top-tier performance but at a premium enthusiast price. Since you are essentially at the ceiling of current hardware capabilities, there are no meaningful performance upgrades available. However, if you wanted a more cost-effective build that still delivers a great experience, you could theoretically step down to a high-end processor with a significantly better value rating. For example, the Ryzen 9 9950X is a great upgrade option for around $649 (Rank #4 for value).
Your Ryzen 7 9800X3D is already an incredibly powerful processor. While it's technically the first component to hit its limit (which is completely normal in state-of-the-art builds), there is no meaningful upgrade path that would drastically improve your Naraka: Bladepoint performance right now. CPU fully utilized at: 1080p low, 1080p medium, 1080p high, 1080p ultra, 1440p low, 1440p medium, 1440p high, 4k low, 4k medium.
Naraka: Bladepoint does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Naraka: Bladepoint requires at minimum a Core i5-4460 (CPU) and GeForce GTX 750 Ti (GPU) with 8 GB RAM and 20 GB storage. For the recommended experience, you need a Core i7-7700 and GeForce GTX 1060 with 16 GB RAM. Your Ryzen 7 9800X3D and Radeon RX 6950 XT both exceed the recommended specs, so you're well-positioned for a great experience.
These Naraka: Bladepoint FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
