Cyberpunk 2077
The benchmark for modern graphical fidelity. Update 2.0 and Phantom Liberty raised the requirements, making an SSD mandatory. The dense city and NPC AI require strong multi-thread CPU performance. Path Tracing ('Overdrive Mode') is a feature reserved for high-end RTX 40 series cards with Frame Generation.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, all quality settings exceed 81 FPS. At 1440p, frame rates range from 55 to 98 FPS. At 4K, frame rates range from 28 to 57 FPS.
The RTX 3500 Ada Generation Embedded GPU is 53% above the recommended GPU (GeForce RTX 2060 Super) for Cyberpunk 2077. The Ryzen 7 9800X3D is 17% above the recommended CPU (Core i7-12700).
The RTX 3500 Ada Generation Embedded GPU sets the FPS ceiling at all 1080p settings, all 1440p settings, all 4k settings, while the Ryzen 7 9800X3D still has additional frame-generation headroom.
This chart answers a simple question: which upgrade is more likely to increase FPS first? In this case, the answer is clearly the GPU.
The largest gap appears at 4K Medium, where the RTX 3500 Ada Generation Embedded GPU reaches about 47 FPS, while the Ryzen 7 9800X3D still has headroom up to roughly 160 FPS.
That means the RTX 3500 Ada Generation Embedded GPU is hitting its performance ceiling first, leaving a 71% gap versus the Ryzen 7 9800X3D's available headroom in the most unbalanced scenario. Across all tested settings, this pairing is GPU-limited in 12 out of 12 cases, with 0 CPU-limited and 0 balanced results.
Overall, this is a clearly GPU-bound combination in this game.
The RTX 3500 Ada Generation Embedded GPU is consistently the limiting part in this game, so upgrading the GPU is more likely to deliver a larger FPS gain than upgrading the CPU.
This chart shows which upgrade is more likely to unlock more FPS in each tested setting. The lower line represents the part that reaches its limit first. When the CPU and GPU lines stay close together, the system is more balanced. When the gap widens, one component is more clearly holding the other back. Hover any setting to inspect it.
The lower line is the current limiter. The closer the two lines are, the more balanced the CPU and GPU are for this game.
Each line represents an estimated FPS ceiling for one component, rather than live usage alone.
To estimate the CPU ceiling, we pair the Ryzen 7 9800X3D with GeForce RTX 5090, our current GPU anchor. To estimate the GPU ceiling, we pair the RTX 3500 Ada Generation Embedded GPU with Ryzen 9 9950X3D, our current CPU anchor.
The lower line indicates the current limiter, since that component reaches its FPS ceiling first. In most scenarios, that is also the part most likely to deliver the bigger performance uplift if upgraded first.
The percentage shown represents the gap between the two ceilings. In practical terms, it shows how much of the stronger component's potential is left unused because the weaker one becomes the bottleneck first.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 17% above and your GPU is 53% above the recommended specs. High/Ultra at 1080p. Lower settings for higher resolutions.
+17%vsrecommended
+53%vsrecommended
+226%vsminimum
+151%vsminimum
Yes, the Ryzen 7 9800X3D paired with the RTX 3500 Ada Generation Embedded GPU can run Cyberpunk 2077 smoothly up to 1080p achieving around 81 FPS at Ultra quality. Your GPU is 53% above the recommended specs, and your CPU is 17% above the recommended requirements.
Price data is not currently available for this combination. In general, look for setups where the CPU and GPU are balanced - this ensures you're not overspending on one component that the other can't keep up with.
For Cyberpunk 2077, upgrading the GPU would usually give you the most noticeable improvement. In the Performance Limiter Analysis, the RTX 3500 Ada Generation Embedded GPU is the side that most often caps the frame rate, while the Ryzen 7 9800X3D still has additional headroom in the tested presets. If you want to unlock more of the pairing's current ceiling, a stronger graphics card like RTX PRO 6000 for around $8,565 would be the clearest next step. The main bottleneck appears on the GPU side. The largest gap shows up at 4K Medium, where the GPU reaches about 47 FPS while the CPU still has headroom up to roughly 160 FPS. Across all tested settings, the distribution is 12/12 GPU-limited, 0/12 CPU-limited, and 0/12 balanced.
Cyberpunk 2077 does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Cyberpunk 2077 requires at minimum a Core i7-6700 (CPU) and GeForce GTX 1060 (GPU) with 12 GB RAM and 70 GB (SSD) storage. For the recommended experience, you need a Core i7-12700 and GeForce RTX 2060 Super with 16 GB RAM. Your Ryzen 7 9800X3D and RTX 3500 Ada Generation Embedded GPU both exceed the recommended specs, so you're well-positioned for a great experience.
These Cyberpunk 2077 FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
