Genshin Impact
Optimized for mobile roots, the PC version offers higher resolution textures and volumetric shadows while keeping minimum specs low. It is light on the CPU but requires a dedicated GPU for stable 1080p/60FPS gameplay.
This game has a built-in FPS cap of 60 FPS
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, frame rates range from 57 to 69 FPS depending on quality settings. At 1440p, frame rates range from 54 to 66 FPS. At 4K, frame rates range from 48 to 60 FPS.
The RTX 3500 Ada Generation Embedded GPU is 151% above the recommended GPU (GeForce GTX 1060) for Genshin Impact. The Ryzen 7 9800X3D is 16% above the recommended CPU (Core i7).
At lower resolutions (all 1080p settings), the Ryzen 7 9800X3D sets the FPS ceiling. As graphical load increases at (all 1440p settings, all 4k settings), the RTX 3500 Ada Generation Embedded GPU becomes the FPS-limiting side.
This chart answers a simple question: which upgrade is more likely to increase FPS first? In this case, the answer is the GPU.
The largest gap appears at 1440p High, where the RTX 3500 Ada Generation Embedded GPU reaches about 62 FPS, while the Ryzen 7 9800X3D still has headroom up to roughly 86 FPS.
That means the RTX 3500 Ada Generation Embedded GPU is hitting its performance ceiling first, leaving a 28% gap versus the Ryzen 7 9800X3D's available headroom in the most unbalanced scenario. Across all tested settings, this pairing is GPU-limited in 8 out of 12 cases, with 4 CPU-limited and 0 balanced results.
Overall, this is a GPU-limited combination in this game.
The RTX 3500 Ada Generation Embedded GPU is usually the limiting part in this game, so upgrading the GPU is more likely to deliver a larger FPS gain than upgrading the CPU.
This chart shows which upgrade is more likely to unlock more FPS in each tested setting. The lower line represents the part that reaches its limit first. When the CPU and GPU lines stay close together, the system is more balanced. When the gap widens, one component is more clearly holding the other back. Hover any setting to inspect it.
The lower line is the current limiter. The closer the two lines are, the more balanced the CPU and GPU are for this game.
Each line represents an estimated FPS ceiling for one component, rather than live usage alone.
To estimate the CPU ceiling, we pair the Ryzen 7 9800X3D with GeForce RTX 5090, our current GPU anchor. To estimate the GPU ceiling, we pair the RTX 3500 Ada Generation Embedded GPU with Ryzen 9 9950X3D, our current CPU anchor.
The lower line indicates the current limiter, since that component reaches its FPS ceiling first. In most scenarios, that is also the part most likely to deliver the bigger performance uplift if upgraded first.
The percentage shown represents the gap between the two ceilings. In practical terms, it shows how much of the stronger component's potential is left unused because the weaker one becomes the bottleneck first.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 16% above and your GPU is 151% above the recommended specs. High/Ultra at 1080p. Lower settings for higher resolutions.
+16%vsrecommended
+151%vsrecommended
+203%vsminimum
+774%vsminimum
The Ryzen 7 9800X3D and RTX 3500 Ada Generation Embedded GPU will struggle to run Genshin Impact at smooth framerates. At 1080p Ultra, you can expect around 57 FPS which is classified as "playable". Consider lowering settings or upgrading your hardware.
Price data is not currently available for this combination. In general, look for setups where the CPU and GPU are balanced - this ensures you're not overspending on one component that the other can't keep up with.
For Genshin Impact, upgrading the GPU would usually give you the most noticeable improvement. In the Performance Limiter Analysis, the RTX 3500 Ada Generation Embedded GPU is the side that most often caps the frame rate, while the Ryzen 7 9800X3D still has additional headroom in the tested presets. If you want to unlock more of the pairing's current ceiling, a stronger graphics card like RTX PRO 6000 for around $8,565 would be the clearest next step. The main bottleneck appears on the GPU side. The largest gap shows up at 1440p High, where the GPU reaches about 62 FPS while the CPU still has headroom up to roughly 86 FPS. Across all tested settings, the distribution is 8/12 GPU-limited, 4/12 CPU-limited, and 0/12 balanced.
Genshin Impact does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Genshin Impact requires at minimum a Core i5 (CPU) and GeForce GT 1030 (GPU) with 8 GB RAM and 100 GB storage. For the recommended experience, you need a Core i7 and GeForce GTX 1060 with 16 GB RAM. Your Ryzen 7 9800X3D and RTX 3500 Ada Generation Embedded GPU both exceed the recommended specs, so you're well-positioned for a great experience.
These Genshin Impact FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
