This 'Pokémon with guns' survival game runs on Unreal Engine. It is CPU-heavy due to AI simulation for the many creatures. Memory leaks can occur in long sessions, making 16GB of RAM a practical minimum.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, all quality settings exceed 83 FPS. At 1440p, all settings exceed 66 FPS. At 4K, frame rates range from 40 to 71 FPS.
The RTX A2000 12GB is 15% below recommended, but 173% above minimum for Palworld. The Ryzen 7 9800X3D is 78% above the recommended CPU (Core i9-9900K).
The RTX A2000 12GB sets the FPS ceiling at all 1080p settings, all 1440p settings, all 4k settings, while the Ryzen 7 9800X3D still has additional frame-generation headroom.
Approximated average price on current market:
Combo price: $845.38. At 1080p Ultra, this combo delivers 83 FPS, equivalent to 0.1 FPS per dollar.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p | 0.151 fps/$ | 0.141 fps/$ | 0.121 fps/$ | 0.098 fps/$ |
| 1440p | 0.128 fps/$ | 0.117 fps/$ | 0.102 fps/$ | 0.078 fps/$ |
| 4k | 0.084 fps/$ | 0.073 fps/$ | 0.060 fps/$ | 0.047 fps/$ |
* Table values represent FPS per Dollar (higher is better)
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages. Adjacent heavier settings are lightly stabilized to remove prediction jitter that would otherwise create impossible reversals.
At 4k ultra, the RTX A2000 12GB sets the ceiling at about 41 FPS, while the Ryzen 7 9800X3D has headroom up to 117 FPS. In this scenario, the GPU limits the CPU potential by 65% (FPS gap: 76 FPS). Overall distribution: GPU limits 12/12 cells, CPU limits 0/12, balanced 0/12.
Your RTX A2000 12GB is the limiting side in the heaviest mismatch. This means part of the Ryzen 7 9800X3D frame-generation potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | GPU Limits CPU 51% | GPU Limits CPU 54% | GPU Limits CPU 54% | GPU Limits CPU 56% |
| 1440p (2K QHD) | GPU Limits CPU 51% | GPU Limits CPU 54% | GPU Limits CPU 54% | GPU Limits CPU 56% |
| 4K (Ultra HD) | GPU Limits CPU 56% | GPU Limits CPU 61% | GPU Limits CPU 61% | GPU Limits CPU 65% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings and then monotonic-smoothed across heavier presets and resolutions, not generic utilization heuristics.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 78% below recommended and your GPU is 15% below recommended, but both meet minimum specs. Playable at Low/Medium settings, 1080p or below.
+78%vsrecommended
-15%vsrecommended
+417%vsminimum
+173%vsminimum
Yes, the Ryzen 7 9800X3D paired with the RTX A2000 12GB can run Palworld smoothly up to 1440p achieving around 66 FPS at Ultra quality. Your GPU is 15% below the recommended specs, and your CPU is 78% above the recommended requirements.
This CPU + GPU combo costs approximately $845.38 ($465.38 CPU + $380 GPU). Since the GPU is the main limiting factor, investing in a stronger GPU will improve your framerates and overall value. For example, upgrading to the Quadro RTX 4000 (móvel) for around $900 (Rank #105 for value) could deliver noticeably better performance.
For Palworld, upgrading the GPU would give you the most noticeable improvement. The RTX A2000 12GB is the limiting factor here, while the Ryzen 7 9800X3D still has spare capacity. A more powerful GPU would unlock higher FPS, especially at higher resolutions and quality presets. GPU-limited at: 1080p low, 1080p medium, 1080p high, 1080p ultra, 1440p low, 1440p medium, 1440p high, 1440p ultra, 4k low, 4k medium, 4k high, 4k ultra.
Palworld does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Palworld requires at minimum a Core i5-3570K (CPU) and GeForce GTX 1050 (GPU) with 16 GB RAM and 40 GB (SSD) storage. For the recommended experience, you need a Core i9-9900K and GeForce RTX 2070 with 32 GB RAM. Your setup meets the minimum requirements but falls short of the recommended specs. You may need to lower some settings for smooth performance.
These Palworld FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
