Monster Hunter Wilds
A heavy RE Engine title using advanced geometry and global illumination. It has sparked discussion by listing Frame Generation as a requirement for 60 FPS in its recommended specs. An SSD is mandatory.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, all quality settings exceed 116 FPS. At 1440p, all settings exceed 100 FPS. At 4K, all settings exceed 65 FPS.
The RTX PRO 5000 Blackwell is 57% above the recommended GPU (GeForce RTX 2070 Super) for Monster Hunter Wilds. The Ryzen 7 9800X3D is 105% above the recommended CPU (Core i5-11600K).
No major FPS-ceiling mismatch detected. The RTX PRO 5000 Blackwell and Ryzen 7 9800X3D stay close in effective frame-generation ceiling across the tested resolutions and quality settings.
Approximated average price on current market:
Combo price: $5264.38. At 1080p Ultra, this combo delivers 116 FPS, equivalent to 0.02 FPS per dollar.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p | 0.038 fps/$ | 0.032 fps/$ | 0.024 fps/$ | 0.022 fps/$ |
| 1440p | 0.028 fps/$ | 0.024 fps/$ | 0.020 fps/$ | 0.019 fps/$ |
| 4k | 0.019 fps/$ | 0.016 fps/$ | 0.013 fps/$ | 0.012 fps/$ |
* Table values represent FPS per Dollar (higher is better)
Affiliate Disclosure
ChipVERSUS is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. We may earn a commission on qualifying purchases made through our links. This comes at no additional cost to you and helps support our work in providing comprehensive PC building guides and tools.
Amazon and the Amazon logo are trademarks of Amazon.com, Inc. or its affiliates.
This chart answers a simple question: which upgrade is more likely to increase FPS first? In this case, there is no clear winner.
The largest gap still appears at 1080p Ultra, where the RTX PRO 5000 Blackwell reaches about 107 FPS, while the Ryzen 7 9800X3D still has headroom up to roughly 116 FPS.
That means neither part is consistently hitting its ceiling far ahead of the other. Across all tested settings, this pairing is GPU-limited in 8 out of 12 cases, CPU-limited in 0, and balanced in 4.
Overall, this is a balanced combination in this game.
Neither the Ryzen 7 9800X3D nor the RTX PRO 5000 Blackwell stands out as the consistent limiter in this game, so the better upgrade depends more on your target settings than on one obvious bottleneck.
This chart shows which upgrade is more likely to unlock more FPS in each tested setting. The lower line represents the part that reaches its limit first. When the CPU and GPU lines stay close together, the system is more balanced. When the gap widens, one component is more clearly holding the other back. Hover any setting to inspect it.
The lower line is the current limiter. The closer the two lines are, the more balanced the CPU and GPU are for this game.
Each line represents an estimated FPS ceiling for one component, rather than live usage alone.
To estimate the CPU ceiling, we pair the Ryzen 7 9800X3D with GeForce RTX 5090, our current GPU anchor. To estimate the GPU ceiling, we pair the RTX PRO 5000 Blackwell with Ryzen 9 9950X3D, our current CPU anchor.
The lower line indicates the current limiter, since that component reaches its FPS ceiling first. In most scenarios, that is also the part most likely to deliver the bigger performance uplift if upgraded first.
The percentage shown represents the gap between the two ceilings. In practical terms, it shows how much of the stronger component's potential is left unused because the weaker one becomes the bottleneck first.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 105% above and your GPU is 57% above the recommended specs. Ultra settings at 1080p, or High at 1440p/4K.
+105%vsrecommended
+57%vsrecommended
+126%vsminimum
+130%vsminimum
Yes, the Ryzen 7 9800X3D paired with the RTX PRO 5000 Blackwell can run Monster Hunter Wilds smoothly up to 4k achieving around 65 FPS at Ultra quality. Your GPU is 57% above the recommended specs, and your CPU is 105% above the recommended requirements.
This CPU + GPU combo costs approximately $5,264.38 ($465.38 CPU + $4,799 GPU). This is a well-balanced setup, meaning you're getting good value from both components without significant waste.
This setup is already well-balanced for Monster Hunter Wilds. In the Performance Limiter Analysis, neither side consistently defines the maximum FPS across the tested presets. Across all tested settings, the distribution is 8/12 GPU-limited, 0/12 CPU-limited, and 4/12 balanced. In practice, this pairing behaves as a well-balanced combination in this game. Because of that, upgrading only one component would usually bring smaller gains than improving the overall pairing.
Monster Hunter Wilds does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Monster Hunter Wilds requires at minimum a Core i5-10600 (CPU) and GeForce GTX 1660 Super (GPU) with 16 GB RAM and 140 GB (SSD) storage. For the recommended experience, you need a Core i5-11600K and GeForce RTX 2070 Super with 16 GB RAM. Your Ryzen 7 9800X3D and RTX PRO 5000 Blackwell both exceed the recommended specs, so you're well-positioned for a great experience.
These Monster Hunter Wilds FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
