This 'Pokémon with guns' survival game runs on Unreal Engine. It is CPU-heavy due to AI simulation for the many creatures. Memory leaks can occur in long sessions, making 16GB of RAM a practical minimum.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, frame rates range from 30 to 87 FPS depending on quality settings. At 1440p, frame rates range from 22 to 59 FPS. At 4K, frame rates range from 11 to 27 FPS.
The RTX Pro 6000 Blackwell DC-12Q is 45% below minimum GPU requirement for Palworld. The Ryzen 7 9800X3D is 78% above the recommended CPU (Core i9-9900K).
The RTX Pro 6000 Blackwell DC-12Q sets the FPS ceiling at all 1080p settings, all 1440p settings, all 4k settings, while the Ryzen 7 9800X3D still has additional frame-generation headroom.
Approximated average price on current market:
Combo price: $9030.38. At 1080p Ultra, this combo delivers 30 FPS, equivalent to 0 FPS per dollar.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p | 0.010 fps/$ | 0.008 fps/$ | 0.004 fps/$ | 0.003 fps/$ |
| 1440p | 0.007 fps/$ | 0.005 fps/$ | 0.003 fps/$ | 0.002 fps/$ |
| 4k | 0.003 fps/$ | 0.002 fps/$ | 0.002 fps/$ | 0.001 fps/$ |
* Table values represent FPS per Dollar (higher is better)
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages. Adjacent heavier settings are lightly stabilized to remove prediction jitter that would otherwise create impossible reversals.
At 4k ultra, the RTX Pro 6000 Blackwell DC-12Q sets the ceiling at about 11 FPS, while the Ryzen 7 9800X3D has headroom up to 118 FPS. In this scenario, the GPU limits the CPU potential by 91% (FPS gap: 107 FPS). Overall distribution: GPU limits 12/12 cells, CPU limits 0/12, balanced 0/12.
Your RTX Pro 6000 Blackwell DC-12Q is the limiting side in the heaviest mismatch. This means part of the Ryzen 7 9800X3D frame-generation potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | GPU Limits CPU 70% | GPU Limits CPU 75% | GPU Limits CPU 86% | GPU Limits CPU 86% |
| 1440p (2K QHD) | GPU Limits CPU 74% | GPU Limits CPU 78% | GPU Limits CPU 87% | GPU Limits CPU 87% |
| 4K (Ultra HD) | GPU Limits CPU 84% | GPU Limits CPU 88% | GPU Limits CPU 90% | GPU Limits CPU 91% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings and then monotonic-smoothed across heavier presets and resolutions, not generic utilization heuristics.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your hardware is below minimum requirements. GPU is the limiting factor (45% below minimum). Expect performance issues. Low settings recommended.
+78%vsrecommended
-83%vsrecommended
+417%vsminimum
-45%vsminimum
The Ryzen 7 9800X3D and RTX Pro 6000 Blackwell DC-12Q will struggle to run Palworld at smooth framerates. At 1080p Ultra, you can expect around 30 FPS which is classified as "playable". Consider lowering settings or upgrading your hardware.
This CPU + GPU combo costs approximately $9030.38 ($465.38 CPU + $8565 GPU). Your RTX Pro 6000 Blackwell DC-12Q is currently the main performance bottleneck and its market value ($8565) is actually higher than newer, faster alternatives. Trading it or upgrading could yield immediate profit and performance gains. For example, upgrading to the Radeon Pro Vega 56 for around $399 (Rank #97 for value) could deliver noticeably better performance while costing less than your current GPU.
For Palworld, upgrading the GPU would give you the most noticeable improvement. The RTX Pro 6000 Blackwell DC-12Q is the limiting factor here, while the Ryzen 7 9800X3D still has spare capacity. A more powerful GPU would unlock higher FPS, especially at higher resolutions and quality presets. GPU-limited at: 1080p low, 1080p medium, 1080p high, 1080p ultra, 1440p low, 1440p medium, 1440p high, 1440p ultra, 4k low, 4k medium, 4k high, 4k ultra.
Palworld does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Palworld requires at minimum a Core i5-3570K (CPU) and GeForce GTX 1050 (GPU) with 16 GB RAM and 40 GB (SSD) storage. For the recommended experience, you need a Core i9-9900K and GeForce RTX 2070 with 32 GB RAM. Your hardware falls below the minimum requirements for this game, which may result in poor performance.
These Palworld FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
