Stardew Valley
Extremely accessible and runs on almost anything. It is single-threaded with negligible GPU load. However, installing many mods can increase RAM usage to 2-4GB.
This game has a built-in FPS cap of 60 FPS
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, all quality settings exceed 61 FPS. At 1440p, frame rates range from 45 to 49 FPS. At 4K, frame rates range from 31 to 47 FPS.
The RTX Pro 6000 Blackwell DC-12Q is 21% above the recommended GPU (GeForce GTX 460) for Stardew Valley. The Ryzen 7 9800X3D is 203% above the recommended CPU (Core i3).
The RTX Pro 6000 Blackwell DC-12Q sets the FPS ceiling at all 1080p settings, all 1440p settings, all 4k settings, while the Ryzen 7 9800X3D still has additional frame-generation headroom.
Approximated average price on current market:
Combo price: $9030.38. At 1080p Ultra, this combo delivers 61 FPS, equivalent to 0.01 FPS per dollar.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p | 0.007 fps/$ | 0.007 fps/$ | 0.007 fps/$ | 0.007 fps/$ |
| 1440p | 0.005 fps/$ | 0.005 fps/$ | 0.005 fps/$ | 0.005 fps/$ |
| 4k | 0.005 fps/$ | 0.005 fps/$ | 0.005 fps/$ | 0.003 fps/$ |
* Table values represent FPS per Dollar (higher is better)
Affiliate Disclosure
ChipVERSUS is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. We may earn a commission on qualifying purchases made through our links. This comes at no additional cost to you and helps support our work in providing comprehensive PC building guides and tools.
Amazon and the Amazon logo are trademarks of Amazon.com, Inc. or its affiliates.
This chart answers a simple question: which upgrade is more likely to increase FPS first? In this case, the answer is clearly the GPU.
The largest gap appears at 4K Ultra, where the RTX Pro 6000 Blackwell DC-12Q reaches about 31 FPS, while the Ryzen 7 9800X3D still has headroom up to roughly 47 FPS.
That means the RTX Pro 6000 Blackwell DC-12Q is hitting its performance ceiling first, leaving a 34% gap versus the Ryzen 7 9800X3D's available headroom in the most unbalanced scenario. Across all tested settings, this pairing is GPU-limited in 12 out of 12 cases, with 0 CPU-limited and 0 balanced results.
Overall, this is a clearly GPU-bound combination in this game.
The RTX Pro 6000 Blackwell DC-12Q is consistently the limiting part in this game, so upgrading the GPU is more likely to deliver a larger FPS gain than upgrading the CPU.
This chart shows which upgrade is more likely to unlock more FPS in each tested setting. The lower line represents the part that reaches its limit first. When the CPU and GPU lines stay close together, the system is more balanced. When the gap widens, one component is more clearly holding the other back. Hover any setting to inspect it.
The lower line is the current limiter. The closer the two lines are, the more balanced the CPU and GPU are for this game.
Each line represents an estimated FPS ceiling for one component, rather than live usage alone.
To estimate the CPU ceiling, we pair the Ryzen 7 9800X3D with GeForce RTX 5090, our current GPU anchor. To estimate the GPU ceiling, we pair the RTX Pro 6000 Blackwell DC-12Q with Ryzen 9 9950X3D, our current CPU anchor.
The lower line indicates the current limiter, since that component reaches its FPS ceiling first. In most scenarios, that is also the part most likely to deliver the bigger performance uplift if upgraded first.
The percentage shown represents the gap between the two ceilings. In practical terms, it shows how much of the stronger component's potential is left unused because the weaker one becomes the bottleneck first.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 203% above and your GPU is 21% above the recommended specs. High/Ultra at 1080p. Lower settings for higher resolutions.
+203%vsrecommended
+21%vsrecommended
+1724%vsminimum
+1782%vsminimum
Yes, the Ryzen 7 9800X3D paired with the RTX Pro 6000 Blackwell DC-12Q can run Stardew Valley smoothly up to 1080p achieving around 61 FPS at Ultra quality. Your GPU is 21% above the recommended specs, and your CPU is 203% above the recommended requirements.
This CPU + GPU combo costs approximately $9,030.38 ($465.38 CPU + $8,565 GPU). Your RTX Pro 6000 Blackwell DC-12Q is currently the main performance bottleneck and its market value ($8,565) is actually higher than newer, faster alternatives. Trading it or upgrading could yield immediate profit and performance gains. For example, upgrading to the Radeon Pro Vega 56 for around $399 (Rank #97 for value) could deliver noticeably better performance while costing less than your current GPU.
For Stardew Valley, upgrading the GPU would usually give you the most noticeable improvement. In the Performance Limiter Analysis, the RTX Pro 6000 Blackwell DC-12Q is the side that most often caps the frame rate, while the Ryzen 7 9800X3D still has additional headroom in the tested presets. The main bottleneck appears on the GPU side. The largest gap shows up at 4K Ultra, where the GPU reaches about 31 FPS while the CPU still has headroom up to roughly 47 FPS. Across all tested settings, the distribution is 12/12 GPU-limited, 0/12 CPU-limited, and 0/12 balanced.
Stardew Valley does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Stardew Valley requires at minimum a Core 2 Duo (CPU) and GeForce 7 series (GPU) with 2 GB RAM and 500 MB storage. For the recommended experience, you need a Core i3 and GeForce GTX 460 with 4 GB RAM. Your Ryzen 7 9800X3D and RTX Pro 6000 Blackwell DC-12Q both exceed the recommended specs, so you're well-positioned for a great experience.
These Stardew Valley FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
