Bethesda's Creation Engine 2 is CPU-dependent, especially in cities, and requires an SSD for asset streaming. Optimization tends to favor AMD slightly, but generally requires powerful hardware to run smoothly.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, all quality settings exceed 67 FPS. At 1440p, frame rates range from 57 to 109 FPS. At 4K, frame rates range from 31 to 52 FPS.
The GeForce RTX 4090 is 52% above the recommended GPU (GeForce RTX 2080) for Starfield. The Ryzen 7 PRO 2700X is 6% below recommended, but 22% above minimum.
Starfield supports: FSR 3 Frame Gen, AFMF. The GeForce RTX 4090 can use FSR 3 Frame Gen, providing up to 1.5x-2x frame rate boost.
The Ryzen 7 PRO 2700X sets the FPS ceiling at all 1080p settings, all 1440p settings, all 4k settings, while the GeForce RTX 4090 still has headroom.
Approximated average price on current market:
Combo price: $1799. At 1080p Ultra, this combo delivers 67 FPS, equivalent to 0.04 FPS per dollar.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p | 0.066 fps/$ | 0.055 fps/$ | 0.047 fps/$ | 0.037 fps/$ |
| 1440p | 0.061 fps/$ | 0.051 fps/$ | 0.042 fps/$ | 0.032 fps/$ |
| 4k | 0.029 fps/$ | 0.024 fps/$ | 0.022 fps/$ | 0.017 fps/$ |
* Table values represent FPS per Dollar (higher is better)
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.
At 4k medium, the Ryzen 7 PRO 2700X sets the ceiling at about 48 FPS, while the GeForce RTX 4090 could reach 83 FPS. In this scenario, the CPU limits the GPU potential by 42% (FPS gap: 35 FPS). Overall distribution: CPU limits 12/12 cells, GPU limits 0/12, balanced 0/12.
Your Ryzen 7 PRO 2700X is the limiting side in the heaviest mismatch. This means part of the GeForce RTX 4090 rendering potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU Limits GPU 18% | CPU Limits GPU 16% | CPU Limits GPU 11% | CPU Limits GPU 15% |
| 1440p (2K QHD) | CPU Limits GPU 19% | CPU Limits GPU 16% | CPU Limits GPU 14% | CPU Limits GPU 17% |
| 4K (Ultra HD) | CPU Limits GPU 40% | CPU Limits GPU 42% | CPU Limits GPU 39% | CPU Limits GPU 38% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 6% below recommended and your GPU is 52% below recommended, but both meet minimum specs. Playable at Low/Medium settings, 1080p or below.
-6%vsrecommended
+52%vsrecommended
+22%vsminimum
+160%vsminimum
Yes, the Ryzen 7 PRO 2700X paired with the GeForce RTX 4090 can run Starfield smoothly up to 1080p achieving around 67 FPS at Ultra quality. Your GPU is 52% above the recommended specs, and your CPU is 6% below the recommended requirements.
This CPU + GPU combo costs approximately $1799 ($150 CPU (Rank #148 Value) + $1649 GPU (Rank #77 Value)). Since the CPU is the main limiting factor, investing in a stronger processor will improve your framerates and overall value. For example, the Ryzen 9 9950X is a great upgrade option for around $649 (Rank #5 for value).
For Starfield, upgrading the CPU would have the biggest impact on performance. The Ryzen 7 PRO 2700X is currently the limiting factor — the GeForce RTX 4090 has extra headroom that a faster processor could take advantage of. This is especially noticeable at 1080p where CPU performance matters more. CPU-limited at: 1080p high, 1080p low, 1080p medium, 1080p ultra, 1440p high, 1440p low, 1440p medium, 1440p ultra, 4k high, 4k low, 4k medium, 4k ultra.
Yes! Starfield supports FSR 3 Frame Gen and AFMF, and your GeForce RTX 4090 is compatible with FSR 3 Frame Gen. With Frame Generation enabled, you can expect a 1.5x-2x FPS multiplier on top of native framerates, significantly boosting perceived smoothness.
Starfield requires at minimum a Core i7-6800K (CPU) and GeForce GTX 1070 Ti (GPU) with 16 GB RAM and 125 GB (SSD Obrigatório) storage. For the recommended experience, you need a Core i5-10600K and GeForce RTX 2080 with 16 GB RAM. Your setup meets the minimum requirements but falls short of the recommended specs. You may need to lower some settings for smooth performance.
These Starfield FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
