Unlike shooters, Naraka focuses on melee combat with fluid animations. The game is visually dense and supports DLSS, which is vital for high frame rates at resolutions above 1080p. An SSD is critical for map loading, and 16GB of RAM is recommended for smooth gameplay.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, all quality settings exceed 344 FPS, suitable for 144Hz+ monitors. At 1440p, all settings exceed 246 FPS. At 4K, all settings exceed 143 FPS.
The GeForce RTX 4090 is 279% above the recommended GPU (GeForce GTX 1060) for Naraka: Bladepoint. The Ryzen 9 7950X is 374% above the recommended CPU (Core i7-7700).
Naraka: Bladepoint supports: DLSS Frame Gen, FSR 3 Frame Gen, AFMF. The GeForce RTX 4090 can use DLSS Frame Gen and FSR 3 Frame Gen, providing up to 2x-3x frame rate boost.
The GeForce RTX 4090 sets the FPS ceiling at 1080p (medium/high), all 1440p settings, all 4k settings, while the Ryzen 9 7950X still has additional frame-generation headroom. The FPS ceiling is closely matched at 1080p (low/ultra).
Approximated average price on current market:
Combo price: $1669. At 1080p Ultra, this combo delivers 344 FPS, equivalent to 0.21 FPS per dollar.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p | 0.338 fps/$ | 0.306 fps/$ | 0.266 fps/$ | 0.206 fps/$ |
| 1440p | 0.212 fps/$ | 0.206 fps/$ | 0.195 fps/$ | 0.147 fps/$ |
| 4k | 0.122 fps/$ | 0.105 fps/$ | 0.099 fps/$ | 0.086 fps/$ |
* Table values represent FPS per Dollar (higher is better)
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.
At 1440p high, the GeForce RTX 4090 sets the ceiling at about 274 FPS, while the Ryzen 9 7950X has headroom up to 325 FPS. In this scenario, the GPU limits the CPU potential by 16% (FPS gap: 51 FPS). Overall distribution: GPU limits 11/12 cells, CPU limits 0/12, balanced 1/12.
Your GeForce RTX 4090 is the limiting side in the heaviest mismatch. This means part of the Ryzen 9 7950X frame-generation potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | Balanced | GPU Limits CPU 6% | GPU Limits CPU 8% | GPU Limits CPU 6% |
| 1440p (2K QHD) | GPU Limits CPU 8% | GPU Limits CPU 10% | GPU Limits CPU 16% | GPU Limits CPU 14% |
| 4K (Ultra HD) | GPU Limits CPU 8% | GPU Limits CPU 9% | GPU Limits CPU 15% | GPU Limits CPU 13% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 374% above and your GPU is 279% above the recommended specs. Ultra settings at 1080p, or High at 1440p/4K.
+374%vsrecommended
+279%vsrecommended
+1168%vsminimum
+877%vsminimum
Yes, the Ryzen 9 7950X paired with the GeForce RTX 4090 can run Naraka: Bladepoint smoothly up to 4k achieving around 143 FPS at Ultra quality. Your GPU is 279% above the recommended specs, and your CPU is 374% above the recommended requirements.
This CPU + GPU combo costs approximately $1669 ($20 CPU (Rank #1 Value) + $1649 GPU (Rank #77 Value)). Your GeForce RTX 4090 provides phenomenal top-tier performance but at a premium enthusiast price. Since you are essentially at the ceiling of current hardware capabilities, there are no meaningful performance upgrades available. However, if you wanted a more cost-effective build that still delivers a great experience, you could theoretically step down to a high-end card with a significantly better value rating.
Your GeForce RTX 4090 is already a top-tier graphics card. While it's technically the limiting factor here (which means you are fully utilizing your GPU's visual horsepower exactly as intended), there is no meaningful upgrade path that would drastically improve your Naraka: Bladepoint performance right now. GPU fully utilized at: 1080p high, 1080p medium, 1440p high, 1440p low, 1440p medium, 1440p ultra, 4k high, 4k low, 4k medium, 4k ultra.
Yes! Naraka: Bladepoint supports DLSS Frame Gen and FSR 3 Frame Gen and AFMF, and your GeForce RTX 4090 is compatible with DLSS Frame Gen and FSR 3 Frame Gen. With Frame Generation enabled, you can expect a 2x-3x FPS multiplier on top of native framerates, significantly boosting perceived smoothness.
Naraka: Bladepoint requires at minimum a Core i5-4460 (CPU) and GeForce GTX 750 Ti (GPU) with 8 GB RAM and 20 GB storage. For the recommended experience, you need a Core i7-7700 and GeForce GTX 1060 with 16 GB RAM. Your Ryzen 9 7950X and GeForce RTX 4090 both exceed the recommended specs, so you're well-positioned for a great experience.
These Naraka: Bladepoint FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
