Built for massive sieges, this MMO creates a significant CPU bottleneck in large battles. 16GB of RAM is the minimum, setting a standard for next-gen MMOs.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, all quality settings exceed 182 FPS, suitable for 144Hz+ monitors. At 1440p, all settings exceed 154 FPS. At 4K, all settings exceed 123 FPS.
The GeForce RTX 5090 is 189% above the recommended GPU (GeForce GTX 1660) for Throne and Liberty. The Ryzen 9 7950X is 219% above the recommended CPU (Core i5-11600K).
No major FPS-ceiling mismatch detected. The GeForce RTX 5090 and Ryzen 9 7950X stay close in effective frame-generation ceiling across the tested resolutions and quality settings.
Approximated average price on current market:
Combo price: $3238.04. At 1080p Ultra, this combo delivers 182 FPS, equivalent to 0.06 FPS per dollar.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p | 0.105 fps/$ | 0.090 fps/$ | 0.067 fps/$ | 0.056 fps/$ |
| 1440p | 0.080 fps/$ | 0.073 fps/$ | 0.055 fps/$ | 0.048 fps/$ |
| 4k | 0.066 fps/$ | 0.059 fps/$ | 0.043 fps/$ | 0.038 fps/$ |
* Table values represent FPS per Dollar (higher is better)
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages. Adjacent heavier settings are lightly stabilized to remove prediction jitter that would otherwise create impossible reversals.
This CPU/GPU pair is mostly balanced in Throne and Liberty. Across tested presets: GPU limits in 0/12, CPU limits in 0/12, and balanced in 12/12. Peak observed performance in the sampled cells is around 340 FPS.
The Ryzen 9 7950X and GeForce RTX 5090 stay close in effective frame-generation ceiling across most presets, so neither side consistently suppresses the other by a large margin.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | Balanced | Balanced | Balanced | Balanced |
| 1440p (2K QHD) | Balanced | Balanced | Balanced | Balanced |
| 4K (Ultra HD) | Balanced | Balanced | Balanced | Balanced |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings and then monotonic-smoothed across heavier presets and resolutions, not generic utilization heuristics.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 219% above and your GPU is 189% above the recommended specs. Ultra settings at 1080p, or High at 1440p/4K.
+219%vsrecommended
+189%vsrecommended
+374%vsminimum
+534%vsminimum
Yes, the Ryzen 9 7950X paired with the GeForce RTX 5090 can run Throne and Liberty smoothly up to 4k achieving around 123 FPS at Ultra quality. Your GPU is 189% above the recommended specs, and your CPU is 219% above the recommended requirements.
This CPU + GPU combo costs approximately $3238.04 ($538.04 CPU + $2700 GPU). This is a well-balanced setup, meaning you're getting good value from both components without significant waste.
This setup is already well-balanced for Throne and Liberty. No significant bottleneck - CPU and GPU are well matched across all settings. Both the Ryzen 9 7950X and GeForce RTX 5090 complement each other effectively, so upgrading either component individually would yield diminishing returns. If you want more FPS, you'd benefit most from upgrading both CPU and GPU together.
Throne and Liberty does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Throne and Liberty requires at minimum a Core i5-7700 (CPU) and GeForce GTX 960 (GPU) with 16 GB RAM and 63 GB storage. For the recommended experience, you need a Core i5-11600K and GeForce GTX 1660 with 16 GB RAM. Your Ryzen 9 7950X and GeForce RTX 5090 both exceed the recommended specs, so you're well-positioned for a great experience.
These Throne and Liberty FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
