Unlike shooters, Naraka focuses on melee combat with fluid animations. The game is visually dense and supports DLSS, which is vital for high frame rates at resolutions above 1080p. An SSD is critical for map loading, and 16GB of RAM is recommended for smooth gameplay.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, all quality settings exceed 141 FPS. At 1440p, all settings exceed 78 FPS. At 4K, frame rates range from 38 to 62 FPS.
The GeForce RTX 4090 is 279% above the recommended GPU (GeForce GTX 1060) for Naraka: Bladepoint. The Ryzen Embedded V1807B is 39% below recommended, but 64% above minimum.
The Ryzen Embedded V1807B sets the FPS ceiling at all 1080p settings, all 1440p settings, all 4k settings, while the GeForce RTX 4090 still has headroom.
Approximated average price on current market:
Combo price: $1949. At 1080p Ultra, this combo delivers 141 FPS, equivalent to 0.07 FPS per dollar.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p | 0.104 fps/$ | 0.104 fps/$ | 0.093 fps/$ | 0.072 fps/$ |
| 1440p | 0.079 fps/$ | 0.064 fps/$ | 0.055 fps/$ | 0.040 fps/$ |
| 4k | 0.032 fps/$ | 0.026 fps/$ | 0.024 fps/$ | 0.019 fps/$ |
* Table values represent FPS per Dollar (higher is better)
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.
At 4k ultra, the Ryzen Embedded V1807B sets the ceiling at about 38 FPS, while the GeForce RTX 4090 could reach 120 FPS. In this scenario, the CPU limits the GPU potential by 68% (FPS gap: 82 FPS). Overall distribution: CPU limits 12/12 cells, GPU limits 0/12, balanced 0/12.
Your Ryzen Embedded V1807B is the limiting side in the heaviest mismatch. This means part of the GeForce RTX 4090 rendering potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU Limits GPU 60% | CPU Limits GPU 56% | CPU Limits GPU 54% | CPU Limits GPU 56% |
| 1440p (2K QHD) | CPU Limits GPU 52% | CPU Limits GPU 59% | CPU Limits GPU 59% | CPU Limits GPU 62% |
| 4K (Ultra HD) | CPU Limits GPU 66% | CPU Limits GPU 66% | CPU Limits GPU 66% | CPU Limits GPU 68% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU62% - 78% <> GPU57% - 80% <> | CPU62% - 78% <> GPU57% - 80% <> | CPU31% - 50% <> GPU78% - 95% <> | CPU48% - 62% <> GPU71% - 88% <> |
| 1440p (2K QHD) | CPU62% - 75% <> GPU69% - 83% <> | CPU62% - 75% <> GPU69% - 83% <> | CPU28% - 47% <> GPU94% - 99% <> | CPU46% - 59% <> GPU87% - 91% <> |
| 4K (Ultra HD) | CPU61% - 66% <> GPU61% - 83% <> | CPU61% - 66% <> GPU61% - 83% <> | CPU26% - 37% <> GPU84% - 99% <> | CPU37% - 45% <> GPU77% - 91% <> |
The Ryzen Embedded V1807B + GeForce RTX 4090 pairing runs this title with CPU utilization between 26% and 78% and GPU utilization between 57% and 99%. Ryzen Embedded V1807B stays in a controlled operating range, while GeForce RTX 4090 carries most of the graphics load at heavier visual settings. As resolution scales, average GPU load rises from 76% at 1080p to 80% at 4K, while CPU averages move from 59% to 50%.
From a utilization perspective, this is a GPU-heavy load profile. At 1440p (2K QHD) High, the GeForce RTX 4090 averages 96% usage (94-99%), while the Ryzen Embedded V1807B stays at 38% (28-47%). This shows the graphics pipeline is carrying most of the workload, but utilization alone does not define the FPS limiter.
At 1080p, averages sit around CPU 59% and GPU 76%. At 1440p, that shifts to CPU 57% and GPU 84%, and at 4K it reaches CPU 50% and GPU 80%. This shows that workload scaling is present on both components, with stronger pressure on the GPU.
1440p (2K QHD) Ultra is the most balanced preset based on this dataset. It runs around CPU 52% (46-59%) and GPU 89% (87-91%), which keeps GeForce RTX 4090 well utilized without constant max-out behavior while Ryzen Embedded V1807B remains stable for consistent frame delivery.
Current utilization does not show an urgent upgrade requirement for either component; the Ryzen Embedded V1807B and GeForce RTX 4090 remain reasonably matched for this title.
Understanding Hardware Utilization: These percentages represent how much of your component's maximum processing power is actively being used during gameplay. They describe hardware load, but they do not directly tell you which component sets the FPS ceiling.
Important: a CPU or GPU can still be the FPS limiter without reaching 100% utilization. Two processors can both show 40% usage and still deliver very different frame rates, depending on per-core speed, cache, engine threading, driver overhead, and frame preparation efficiency.
Data generated by our Machine Learning engine trained on real-world benchmarks. Shows the approximate average utilization at each setting.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 39% below recommended and your GPU is 279% below recommended, but both meet minimum specs. Playable at Low/Medium settings, 1080p or below.
-39%vsrecommended
+279%vsrecommended
+64%vsminimum
+877%vsminimum
Yes, the Ryzen Embedded V1807B paired with the GeForce RTX 4090 can run Naraka: Bladepoint smoothly up to 1440p achieving around 78 FPS at Ultra quality. Your GPU is 279% above the recommended specs, and your CPU is 39% below the recommended requirements.
This CPU + GPU combo costs approximately $1949 ($300 CPU (Rank #387 Value) + $1649 GPU (Rank #77 Value)). Since the CPU is the main limiting factor, investing in a stronger processor will improve your framerates and overall value. For example, the Ryzen 9 9950X is a great upgrade option for around $649 (Rank #5 for value).
For Naraka: Bladepoint, upgrading the CPU would have the biggest impact on performance. The Ryzen Embedded V1807B is currently the limiting factor — the GeForce RTX 4090 has extra headroom that a faster processor could take advantage of. This is especially noticeable at 1080p where CPU performance matters more. CPU-limited at: 1080p low, 1080p medium, 1080p high, 1080p ultra, 1440p low, 1440p medium, 1440p high, 1440p ultra, 4k low, 4k medium, 4k high, 4k ultra.
Naraka: Bladepoint does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Naraka: Bladepoint requires at minimum a Core i5-4460 (CPU) and GeForce GTX 750 Ti (GPU) with 8 GB RAM and 20 GB storage. For the recommended experience, you need a Core i7-7700 and GeForce GTX 1060 with 16 GB RAM. Your setup meets the minimum requirements but falls short of the recommended specs. You may need to lower some settings for smooth performance.
These Naraka: Bladepoint FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
