Bethesda's Creation Engine 2 is CPU-dependent, especially in cities, and requires an SSD for asset streaming. Optimization tends to favor AMD slightly, but generally requires powerful hardware to run smoothly.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, all quality settings exceed 68 FPS. At 1440p, frame rates range from 59 to 128 FPS. At 4K, frame rates range from 33 to 61 FPS.
The GeForce RTX 4090 is 52% above the recommended GPU (GeForce RTX 2080) for Starfield. The Ryzen Embedded V2748 is 2% above the recommended CPU (Core i5-10600K).
At lower resolutions (1080p ultra, 1440p ultra, all 4k settings), the Ryzen Embedded V2748 sets the FPS ceiling. As graphical load increases at (1080p high), the GeForce RTX 4090 becomes the FPS-limiting side. The FPS ceiling is closely matched at 1080p (low/medium), 1440p (low/medium/high).
Approximated average price on current market:
Combo price: $2008. At 1080p Ultra, this combo delivers 68 FPS, equivalent to 0.03 FPS per dollar.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p | 0.073 fps/$ | 0.059 fps/$ | 0.051 fps/$ | 0.034 fps/$ |
| 1440p | 0.064 fps/$ | 0.052 fps/$ | 0.043 fps/$ | 0.029 fps/$ |
| 4k | 0.030 fps/$ | 0.025 fps/$ | 0.023 fps/$ | 0.016 fps/$ |
* Table values represent FPS per Dollar (higher is better)
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.
At 4k medium, the Ryzen Embedded V2748 sets the ceiling at about 55 FPS, while the GeForce RTX 4090 could reach 85 FPS. In this scenario, the CPU limits the GPU potential by 35% (FPS gap: 30 FPS). Overall distribution: CPU limits 6/12 cells, GPU limits 1/12, balanced 5/12.
Your Ryzen Embedded V2748 is the limiting side in the heaviest mismatch. This means part of the GeForce RTX 4090 rendering potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | Balanced | Balanced | GPU Limits CPU 9% | CPU Limits GPU 10% |
| 1440p (2K QHD) | Balanced | Balanced | Balanced | CPU Limits GPU 12% |
| 4K (Ultra HD) | CPU Limits GPU 33% | CPU Limits GPU 35% | CPU Limits GPU 30% | CPU Limits GPU 34% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU86% - 96% <> GPU49% - 69% <> | CPU73% - 93% <> GPU83% - 95% <> | CPU69% - 91% <> GPU86% - 96% <> | CPU70% - 91% <> GPU88% - 98% <> |
| 1440p (2K QHD) | CPU62% - 76% <> GPU70% - 77% <> | CPU63% - 76% <> GPU89% - 96% <> | CPU58% - 75% <> GPU92% - 98% <> | CPU56% - 68% <> GPU95% - 100% <> |
| 4K (Ultra HD) | CPU55% - 75% <> GPU69% - 80% <> | CPU56% - 74% <> GPU94% - 98% <> | CPU50% - 73% <> GPU97% - 99% <> | CPU47% - 64% <> GPU98% - 100% <> |
The Ryzen Embedded V2748 + GeForce RTX 4090 pairing runs this title with CPU utilization between 47% and 96% and GPU utilization between 49% and 100%. Ryzen Embedded V2748 reaches high load in heavier scenarios, while GeForce RTX 4090 carries most of the graphics load at heavier visual settings. As resolution scales, average GPU load rises from 83% at 1080p to 92% at 4K, while CPU averages move from 84% to 62%.
From a utilization perspective, this is a GPU-heavy load profile. At 4K (Ultra HD) Ultra, the GeForce RTX 4090 averages 99% usage (98-100%), while the Ryzen Embedded V2748 stays at 56% (47-64%). This shows the graphics pipeline is carrying most of the workload, but utilization alone does not define the FPS limiter.
At 1080p, averages sit around CPU 84% and GPU 83%. At 1440p, that shifts to CPU 67% and GPU 90%, and at 4K it reaches CPU 62% and GPU 92%. This shows that workload scaling is present on both components, with stronger pressure on the GPU.
1440p (2K QHD) Medium is the most balanced preset based on this dataset. It runs around CPU 70% (63-76%) and GPU 92% (89-96%), which keeps GeForce RTX 4090 well utilized without constant max-out behavior while Ryzen Embedded V2748 remains stable for consistent frame delivery.
Both components are stressed near their limits in the heaviest presets (Ryzen Embedded V2748: 91% avg, GeForce RTX 4090: 99% avg). A targeted upgrade should follow your target resolution: GPU first for higher image quality, CPU first for higher minimum FPS.
Understanding Hardware Utilization: These percentages represent how much of your component's maximum processing power is actively being used during gameplay. They describe hardware load, but they do not directly tell you which component sets the FPS ceiling.
Important: a CPU or GPU can still be the FPS limiter without reaching 100% utilization. Two processors can both show 40% usage and still deliver very different frame rates, depending on per-core speed, cache, engine threading, driver overhead, and frame preparation efficiency.
Data generated by our Machine Learning engine trained on real-world benchmarks. Shows the approximate average utilization at each setting.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 2% above and your GPU is 52% above the recommended specs. High/Ultra at 1080p. Lower settings for higher resolutions.
+2%vsrecommended
+52%vsrecommended
+33%vsminimum
+160%vsminimum
Yes, the Ryzen Embedded V2748 paired with the GeForce RTX 4090 can run Starfield smoothly up to 1080p achieving around 68 FPS at Ultra quality. Your GPU is 52% above the recommended specs, and your CPU is 2% above the recommended requirements.
This CPU + GPU combo costs approximately $2008 ($359 CPU (Rank #341 Value) + $1649 GPU (Rank #77 Value)). Since the CPU is the main limiting factor, investing in a stronger processor will improve your framerates and overall value. For example, the Ryzen 9 9950X is a great upgrade option for around $649 (Rank #5 for value).
For Starfield, upgrading the CPU would have the biggest impact on performance. The Ryzen Embedded V2748 is currently the limiting factor — the GeForce RTX 4090 has extra headroom that a faster processor could take advantage of. This is especially noticeable at 1080p where CPU performance matters more. CPU-limited at: 1080p ultra, 1440p ultra, 4k low, 4k medium, 4k high, 4k ultra. GPU fully utilized at: 1080p high.
Starfield does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Starfield requires at minimum a Core i7-6800K (CPU) and GeForce GTX 1070 Ti (GPU) with 16 GB RAM and 125 GB (SSD Obrigatório) storage. For the recommended experience, you need a Core i5-10600K and GeForce RTX 2080 with 16 GB RAM. Your Ryzen Embedded V2748 and GeForce RTX 4090 both exceed the recommended specs, so you're well-positioned for a great experience.
These Starfield FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
