A continuous open world with player-built structures creates a heavy streaming load. It scales well but recommends 6GB+ VRAM for higher settings.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, frame rates range from 55 to 120 FPS depending on quality settings. At 1440p, frame rates range from 47 to 97 FPS. At 4K, frame rates range from 32 to 65 FPS.
The GeForce RTX 4090 is 279% above the recommended GPU (GeForce GTX 1060) for Once Human. The Ryzen Embedded V3C18I is 13% above the recommended CPU (Core i7-7700).
The Ryzen Embedded V3C18I sets the FPS ceiling at all 1080p settings, all 1440p settings, all 4k settings, while the GeForce RTX 4090 still has headroom.
Approximated average price on current market:
Combo price: $2149. At 1080p Ultra, this combo delivers 55 FPS, equivalent to 0.03 FPS per dollar.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p | 0.056 fps/$ | 0.046 fps/$ | 0.038 fps/$ | 0.026 fps/$ |
| 1440p | 0.045 fps/$ | 0.034 fps/$ | 0.028 fps/$ | 0.022 fps/$ |
| 4k | 0.030 fps/$ | 0.026 fps/$ | 0.019 fps/$ | 0.015 fps/$ |
* Table values represent FPS per Dollar (higher is better)
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.
At 1440p ultra, the Ryzen Embedded V3C18I sets the ceiling at about 46 FPS, while the GeForce RTX 4090 could reach 149 FPS. In this scenario, the CPU limits the GPU potential by 69% (FPS gap: 103 FPS). Overall distribution: CPU limits 12/12 cells, GPU limits 0/12, balanced 0/12.
Your Ryzen Embedded V3C18I is the limiting side in the heaviest mismatch. This means part of the GeForce RTX 4090 rendering potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU Limits GPU 57% | CPU Limits GPU 57% | CPU Limits GPU 57% | CPU Limits GPU 65% |
| 1440p (2K QHD) | CPU Limits GPU 60% | CPU Limits GPU 63% | CPU Limits GPU 66% | CPU Limits GPU 69% |
| 4K (Ultra HD) | CPU Limits GPU 61% | CPU Limits GPU 63% | CPU Limits GPU 67% | CPU Limits GPU 69% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU71% - 77% <> GPU57% - 68% <> | CPU71% - 77% <> GPU57% - 68% <> | CPU53% - 77% <> GPU72% - 82% <> | CPU53% - 77% <> GPU72% - 82% <> |
| 1440p (2K QHD) | CPU56% - 77% <> GPU58% - 70% <> | CPU56% - 77% <> GPU58% - 70% <> | CPU42% - 77% <> GPU77% - 88% <> | CPU42% - 77% <> GPU77% - 88% <> |
| 4K (Ultra HD) | CPU57% - 78% <> GPU56% - 70% <> | CPU57% - 78% <> GPU56% - 70% <> | CPU41% - 78% <> GPU76% - 88% <> | CPU41% - 78% <> GPU76% - 88% <> |
The Ryzen Embedded V3C18I + GeForce RTX 4090 pairing runs this title with CPU utilization between 41% and 78% and GPU utilization between 56% and 88%. Ryzen Embedded V3C18I stays in a controlled operating range, while GeForce RTX 4090 is utilized efficiently without persistent saturation. As resolution scales, average GPU load rises from 70% at 1080p to 73% at 4K, while CPU averages move from 70% to 64%.
The utilization pattern is relatively even. The GeForce RTX 4090 reaches 82% average at its highest-load preset, while the Ryzen Embedded V3C18I peaks at 74% average. This suggests a fairly controlled load distribution, but the actual FPS-limiting side should still be read from the limiter analysis above.
At 1080p, averages sit around CPU 70% and GPU 70%. At 1440p, that shifts to CPU 63% and GPU 73%, and at 4K it reaches CPU 64% and GPU 73%. This shows that workload scaling is present on both components, with stronger pressure on the GPU.
1440p (2K QHD) High is the most balanced preset based on this dataset. It runs around CPU 60% (42-77%) and GPU 82% (77-88%), which keeps GeForce RTX 4090 well utilized without constant max-out behavior while Ryzen Embedded V3C18I remains stable for consistent frame delivery.
Current utilization does not show an urgent upgrade requirement for either component; the Ryzen Embedded V3C18I and GeForce RTX 4090 remain reasonably matched for this title.
Understanding Hardware Utilization: These percentages represent how much of your component's maximum processing power is actively being used during gameplay. They describe hardware load, but they do not directly tell you which component sets the FPS ceiling.
Important: a CPU or GPU can still be the FPS limiter without reaching 100% utilization. Two processors can both show 40% usage and still deliver very different frame rates, depending on per-core speed, cache, engine threading, driver overhead, and frame preparation efficiency.
Data generated by our Machine Learning engine trained on real-world benchmarks. Shows the approximate average utilization at each setting.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 13% above and your GPU is 279% above the recommended specs. High/Ultra at 1080p. Lower settings for higher resolutions.
+13%vsrecommended
+279%vsrecommended
+116%vsminimum
+877%vsminimum
The Ryzen Embedded V3C18I and GeForce RTX 4090 will struggle to run Once Human at smooth framerates. At 1080p Ultra, you can expect around 55 FPS which is classified as "playable". Consider lowering settings or upgrading your hardware.
This CPU + GPU combo costs approximately $2149 ($500 CPU (Rank #386 Value) + $1649 GPU (Rank #77 Value)). Since the CPU is the main limiting factor, investing in a stronger processor will improve your framerates and overall value. For example, the Ryzen 9 9950X is a great upgrade option for around $649 (Rank #5 for value).
For Once Human, upgrading the CPU would have the biggest impact on performance. The Ryzen Embedded V3C18I is currently the limiting factor — the GeForce RTX 4090 has extra headroom that a faster processor could take advantage of. This is especially noticeable at 1080p where CPU performance matters more. CPU-limited at: 1080p low, 1080p medium, 1080p high, 1080p ultra, 1440p low, 1440p medium, 1440p high, 1440p ultra, 4k low, 4k medium, 4k high, 4k ultra.
Once Human does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Once Human requires at minimum a Core i5-4460 (CPU) and GeForce GTX 750 Ti (GPU) with 8 GB RAM and 55 GB storage. For the recommended experience, you need a Core i7-7700 and GeForce GTX 1060 with 16 GB RAM. Your Ryzen Embedded V3C18I and GeForce RTX 4090 both exceed the recommended specs, so you're well-positioned for a great experience.
These Once Human FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
