Built on a modified Source engine, Apex Legends retains the scalability of Titanfall 2. Fast movement demands high frame rates for fluidity. VRAM can be a bottleneck if the 'Texture Streaming Budget' is set too high. While it handles 8GB of RAM better than some competitors, 16GB is recommended. It is generally less CPU-intensive than Warzone, allowing older quad-core CPUs to remain viable.
This game has a built-in FPS cap of 300 FPS
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, all quality settings exceed 232 FPS, suitable for 144Hz+ monitors. At 1440p, all settings exceed 207 FPS. At 4K, all settings exceed 108 FPS.
The GeForce RTX 4090 is 295% above the recommended GPU (GeForce GTX 970) for Apex Legends. The Ryzen Threadripper 1900X is 85% above the recommended CPU (Core i5-3570K).
At lower resolutions (1080p (medium/high/ultra)), the Ryzen Threadripper 1900X sets the FPS ceiling. As graphical load increases at (1440p low, 4k low), the GeForce RTX 4090 becomes the FPS-limiting side. The FPS ceiling is closely matched at 1080p low, 1440p (medium/high/ultra), 4k (medium/high/ultra).
Approximated average price on current market:
Combo price: $1765. At 1080p Ultra, this combo delivers 232 FPS, equivalent to 0.13 FPS per dollar.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p | 0.172 fps/$ | 0.156 fps/$ | 0.150 fps/$ | 0.131 fps/$ |
| 1440p | 0.148 fps/$ | 0.131 fps/$ | 0.131 fps/$ | 0.117 fps/$ |
| 4k | 0.096 fps/$ | 0.078 fps/$ | 0.075 fps/$ | 0.061 fps/$ |
* Table values represent FPS per Dollar (higher is better)
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.
At 1080p ultra, the Ryzen Threadripper 1900X sets the ceiling at about 236 FPS, while the GeForce RTX 4090 could reach 280 FPS. In this scenario, the CPU limits the GPU potential by 16% (FPS gap: 44 FPS). Overall distribution: CPU limits 3/12 cells, GPU limits 2/12, balanced 7/12.
The Ryzen Threadripper 1900X and GeForce RTX 4090 stay close in effective frame-generation ceiling across most presets, so neither side consistently suppresses the other by a large margin.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | Balanced | CPU Limits GPU 8% | CPU Limits GPU 15% | CPU Limits GPU 16% |
| 1440p (2K QHD) | GPU Limits CPU 7% | Balanced | Balanced | Balanced |
| 4K (Ultra HD) | GPU Limits CPU 6% | Balanced | Balanced | Balanced |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU79% - 91% <> GPU50% - 65% <> | CPU78% - 87% <> GPU79% - 94% <> | CPU78% - 87% <> GPU79% - 96% <> | CPU66% - 75% <> GPU79% - 97% <> |
| 1440p (2K QHD) | CPU78% - 89% <> GPU51% - 65% <> | CPU78% - 85% <> GPU80% - 94% <> | CPU78% - 85% <> GPU80% - 96% <> | CPU66% - 75% <> GPU80% - 97% <> |
| 4K (Ultra HD) | CPU77% - 89% <> GPU51% - 65% <> | CPU76% - 85% <> GPU81% - 95% <> | CPU76% - 85% <> GPU81% - 97% <> | CPU64% - 75% <> GPU81% - 97% <> |
The Ryzen Threadripper 1900X + GeForce RTX 4090 pairing runs this title with CPU utilization between 64% and 91% and GPU utilization between 50% and 97%. Ryzen Threadripper 1900X reaches high load in heavier scenarios, while GeForce RTX 4090 is utilized efficiently without persistent saturation. As resolution scales, average GPU load rises from 80% at 1080p to 81% at 4K, while CPU averages move from 80% to 78%.
From a utilization perspective, this is a CPU-heavy load profile. At 1080p (Full HD) Low, the Ryzen Threadripper 1900X reaches 85% average load (79-91%), while the GeForce RTX 4090 remains comparatively lower at 58% (50-65%). This points to heavier CPU-side frame preparation work, but utilization alone does not define the FPS limiter.
At 1080p, averages sit around CPU 80% and GPU 80%. At 1440p, that shifts to CPU 80% and GPU 80%, and at 4K it reaches CPU 78% and GPU 81%. This shows that workload scaling is limited, which can indicate engine-side constraints.
1080p (Full HD) Ultra is the most balanced preset based on this dataset. It runs around CPU 70% (66-75%) and GPU 88% (79-97%), which keeps GeForce RTX 4090 well utilized without constant max-out behavior while Ryzen Threadripper 1900X remains stable for consistent frame delivery.
Current utilization does not show an urgent upgrade requirement for either component; the Ryzen Threadripper 1900X and GeForce RTX 4090 remain reasonably matched for this title.
Understanding Hardware Utilization: These percentages represent how much of your component's maximum processing power is actively being used during gameplay. They describe hardware load, but they do not directly tell you which component sets the FPS ceiling.
Important: a CPU or GPU can still be the FPS limiter without reaching 100% utilization. Two processors can both show 40% usage and still deliver very different frame rates, depending on per-core speed, cache, engine threading, driver overhead, and frame preparation efficiency.
Data generated by our Machine Learning engine trained on real-world benchmarks. Shows the approximate average utilization at each setting.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 85% above and your GPU is 295% above the recommended specs. Ultra settings at 1080p, or High at 1440p/4K.
+85%vsrecommended
+295%vsrecommended
+289%vsminimum
+3160%vsminimum
Yes, the Ryzen Threadripper 1900X paired with the GeForce RTX 4090 can run Apex Legends smoothly up to 4k achieving around 108 FPS at Ultra quality. Your GPU is 295% above the recommended specs, and your CPU is 85% above the recommended requirements.
This CPU + GPU combo costs approximately $1765 ($116 CPU (Rank #278 Value) + $1649 GPU (Rank #77 Value)). Since the CPU is the main limiting factor, investing in a stronger processor will improve your framerates and overall value. For example, the Ryzen 9 9950X is a great upgrade option for around $649 (Rank #5 for value).
For Apex Legends, upgrading the CPU would have the biggest impact on performance. The Ryzen Threadripper 1900X is currently the limiting factor — the GeForce RTX 4090 has extra headroom that a faster processor could take advantage of. This is especially noticeable at 1080p where CPU performance matters more. CPU-limited at: 1080p medium, 1080p high, 1080p ultra. GPU fully utilized at: 1440p low, 4k low.
Apex Legends does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Apex Legends requires at minimum a Core i3-6300 (CPU) and GeForce GT 640 (GPU) with 6 GB RAM and 56 GB storage. For the recommended experience, you need a Core i5-3570K and GeForce GTX 970 with 8 GB RAM. Your Ryzen Threadripper 1900X and GeForce RTX 4090 both exceed the recommended specs, so you're well-positioned for a great experience.
These Apex Legends FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
