Delta ForceFPS onRyzen Threadripper PRO 9995WX&GeForce RTX 4090

Delta Force

Returning to compete with Battlefield, Delta Force uses a modern engine featuring environmental destruction. While minimum requirements are accessible (GTX 960), competitive settings scale up to require GTX 10/RTX 20 series GPUs and 16GB of RAM for the best experience.

Delta Force - FPS Estimates by Resolution

Actual FPS may vary based on RAM speed, background processes, and other system factors

1080P
low374 FPS
medium340 FPS
high317 FPS
ultra270 FPS
1440P
low255 FPS
medium236 FPS
high225 FPS
ultra198 FPS
4K
low167 FPS
medium154 FPS
high138 FPS
ultra108 FPS

Performance Report

Delta Force

GeForce RTX 4090 + Ryzen Threadripper PRO 9995WX
🎮Visual Experience

At 1080p, all quality settings exceed 270 FPS, suitable for 144Hz+ monitors. At 1440p, all settings exceed 198 FPS. At 4K, all settings exceed 108 FPS.

✅Official Requirements

The GeForce RTX 4090 is 315% above the recommended GPU (GeForce GTX 1060 5GB) for Delta Force. The Ryzen Threadripper PRO 9995WX is 1843% above the recommended CPU (Core i5-6500).

✅FPS Ceiling Analysis

No major FPS-ceiling mismatch detected. The GeForce RTX 4090 and Ryzen Threadripper PRO 9995WX stay close in effective frame-generation ceiling across the tested resolutions and quality settings.

💰Value Analysis

Approximated average price on current market:

GeForce RTX 4090:$1649(updated 2/6/2026)
Official Launch Price: $1599
Ryzen Threadripper PRO 9995WX:$11699(updated 2/6/2026)
Official Launch Price: $11699

Combo price: $13348. At 1080p Ultra, this combo delivers 270 FPS, equivalent to 0.02 FPS per dollar.

ResolutionLowMediumHighUltra
1080p0.028 fps/$0.025 fps/$0.024 fps/$0.020 fps/$
1440p0.019 fps/$0.018 fps/$0.017 fps/$0.015 fps/$
4k0.013 fps/$0.012 fps/$0.010 fps/$0.008 fps/$

* Table values represent FPS per Dollar (higher is better)

Performance Limiter Analysis

Ryzen Threadripper PRO 9995WX|GeForce RTX 4090

This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.

📈Analysis

At 4k ultra, the GeForce RTX 4090 sets the ceiling at about 100 FPS, while the Ryzen Threadripper PRO 9995WX has headroom up to 108 FPS. In this scenario, the GPU limits the CPU potential by 7% (FPS gap: 8 FPS). Overall distribution: GPU limits 3/12 cells, CPU limits 0/12, balanced 9/12. Confidence is low because both ceilings are very close in this cell.

✅Verdict

Well Balanced

The Ryzen Threadripper PRO 9995WX and GeForce RTX 4090 stay close in effective frame-generation ceiling across most presets, so neither side consistently suppresses the other by a large margin.

🧩Detailed Breakdown
1080p (Full HD)
LowBalanced
MediumBalanced
HighBalanced
UltraBalanced
1440p (2K QHD)
LowBalanced
MediumBalanced
HighBalanced
UltraGPU Limits CPU 6%
4K (Ultra HD)
LowBalanced
MediumBalanced
HighGPU Limits CPU 6%
UltraGPU Limits CPU 7%
Percentages show how much potential FPS of the stronger component is lost because the other component has a lower FPS ceiling.
🧠Methodology

We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.

Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.

CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.

A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.

📊Predicted Hardware Utilization for Ryzen Threadripper PRO 9995WX and GeForce RTX 4090

1080p (Full HD)

Low
CPU73% - 89%
<>
GPU58% - 73%
<>
Medium
CPU73% - 89%
<>
GPU58% - 73%
<>
High
CPU72% - 90%
<>
GPU60% - 75%
<>
Ultra
CPU72% - 90%
<>
GPU60% - 75%
<>

1440p (2K QHD)

Low
CPU26% - 48%
<>
GPU88% - 94%
<>
Medium
CPU26% - 48%
<>
GPU88% - 94%
<>
High
CPU25% - 49%
<>
GPU90% - 96%
<>
Ultra
CPU25% - 49%
<>
GPU90% - 96%
<>

4K (Ultra HD)

Low
CPU20% - 35%
<>
GPU94% - 95%
<>
Medium
CPU20% - 35%
<>
GPU94% - 95%
<>
High
CPU17% - 35%
<>
GPU96% - 98%
<>
Ultra
CPU17% - 36%
<>
GPU97% - 98%
<>

Performance Summary

The Ryzen Threadripper PRO 9995WX + GeForce RTX 4090 pairing runs this title with CPU utilization between 17% and 90% and GPU utilization between 58% and 98%. Ryzen Threadripper PRO 9995WX stays in a controlled operating range, while GeForce RTX 4090 carries most of the graphics load at heavier visual settings. As resolution scales, average GPU load rises from 67% at 1080p to 96% at 4K, while CPU averages move from 81% to 27%.

Load Interpretation

From a utilization perspective, this is a GPU-heavy load profile. At 4K (Ultra HD) Ultra, the GeForce RTX 4090 averages 98% usage (97-98%), while the Ryzen Threadripper PRO 9995WX stays at 26% (17-36%). This shows the graphics pipeline is carrying most of the workload, but utilization alone does not define the FPS limiter.

Resolution Scaling

At 1080p, averages sit around CPU 81% and GPU 67%. At 1440p, that shifts to CPU 37% and GPU 92%, and at 4K it reaches CPU 27% and GPU 96%. This shows that workload scaling is present on both components, with stronger pressure on the GPU.

Optimal Settings Recommendation

1440p (2K QHD) Low is the most balanced preset based on this dataset. It runs around CPU 37% (26-48%) and GPU 91% (88-94%), which keeps GeForce RTX 4090 well utilized without constant max-out behavior while Ryzen Threadripper PRO 9995WX remains stable for consistent frame delivery.

Upgrade Insight

Current utilization does not show an urgent upgrade requirement for either component; the Ryzen Threadripper PRO 9995WX and GeForce RTX 4090 remain reasonably matched for this title.

Understanding Hardware Utilization: These percentages represent how much of your component's maximum processing power is actively being used during gameplay. They describe hardware load, but they do not directly tell you which component sets the FPS ceiling.

Important: a CPU or GPU can still be the FPS limiter without reaching 100% utilization. Two processors can both show 40% usage and still deliver very different frame rates, depending on per-core speed, cache, engine threading, driver overhead, and frame preparation efficiency.

  • High GPU Load: You typically want to see High GPU Utilization (90%+) and moderate CPU usage when visual settings are heavy. This indicates the graphics pipeline is under strong load, but the exact FPS limiter should still be confirmed by the FPS ceiling analysis.
  • High CPU Load: If you see High CPU Utilization (85%+) paired with lower GPU utilization, the processor is handling a disproportionate share of frame preparation and game logic. That can point to CPU-side pressure, but it should not be treated as a direct replacement for FPS ceiling analysis.
  • Low CPU and GPU Load: If both CPU and GPU utilization are relatively low, it means the hardware is waiting on something else. This could be a game engine limitation, poorly optimized code, or an artificial framerate cap like VSync holding performance back. It does not mean both parts are equally fast in FPS terms.

Data generated by our Machine Learning engine trained on real-world benchmarks. Shows the approximate average utilization at each setting.

Delta Force Requirements Comparison

See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.

CPU - Ryzen Threadripper PRO 9995WX
cpu icon
176,281
Your Score
MinimumCore i3-4150
RecommendedCore i5-6500
GPU - GeForce RTX 4090
gpu icon
38,112
Your Score
MinimumGeForce GTX 960
RecommendedGeForce GTX 1060 5GB

Your CPU is 1843% above and your GPU is 315% above the recommended specs. Ultra settings at 1080p, or High at 1440p/4K.

CPU

+1843%vsrecommended

GPU

+315%vsrecommended

CPU

+4161%vsminimum

GPU

+521%vsminimum

Minimum Requirements
Video Card: GeForce GTX 960
Processor: Core i3-4150
Memory: 12 GB
Disk Space: 50 GB
System: Windows 10 64-bit
Recommended Requirements
Processor: Core i5-6500
Memory: 16 GB
Disk Space: 50 GB (SSD)
System: Windows 10 64-bit

Frequently Asked Questions

1Can the Ryzen Threadripper PRO 9995WX and GeForce RTX 4090 run Delta Force well?

Yes, the Ryzen Threadripper PRO 9995WX paired with the GeForce RTX 4090 can run Delta Force smoothly up to 4k achieving around 108 FPS at Ultra quality. Your GPU is 315% above the recommended specs, and your CPU is 1843% above the recommended requirements.

2Is there a more cost-effective setup to run Delta Force?

This CPU + GPU combo costs approximately $13348 ($11699 CPU (Rank #418 Value) + $1649 GPU (Rank #77 Value)). This is a well-balanced setup, meaning you're getting good value from both components without significant waste.

3Which component should I upgrade first to improve Delta Force performance?

This setup is already well-balanced for Delta Force. No significant bottleneck - CPU and GPU are well matched across all settings. Both the Ryzen Threadripper PRO 9995WX and GeForce RTX 4090 complement each other effectively, so upgrading either component individually would yield diminishing returns. If you want more FPS, you'd benefit most from upgrading both CPU and GPU together.

4Does this setup support Frame Generation for Delta Force?

Delta Force does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.

5What are the minimum and recommended specs for Delta Force?

Delta Force requires at minimum a Core i3-4150 (CPU) and GeForce GTX 960 (GPU) with 12 GB RAM and 50 GB storage. For the recommended experience, you need a Core i5-6500 and GeForce GTX 1060 5GB with 16 GB RAM. Your Ryzen Threadripper PRO 9995WX and GeForce RTX 4090 both exceed the recommended specs, so you're well-positioned for a great experience.

6How accurate are these Delta Force FPS estimates for the Ryzen Threadripper PRO 9995WX and GeForce RTX 4090?

These Delta Force FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.

Performance estimates are based on synthetic benchmarks and hardware capabilities.

Results may vary based on drivers, OS, and background processes.