Built for massive sieges, this MMO creates a significant CPU bottleneck in large battles. 16GB of RAM is the minimum, setting a standard for next-gen MMOs.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, frame rates range from 13 to 32 FPS depending on quality settings. At 1440p, frame rates range from 10 to 24 FPS. At 4K, frame rates range from 7 to 15 FPS.
The GeForce RTX 4090 is 183% above the recommended GPU (GeForce GTX 1660) for Throne and Liberty. The VIA Nano QuadCore L4700 is 88% below minimum CPU requirement.
The GeForce RTX 4090 sets the FPS ceiling at 1080p (high/ultra), all 1440p settings, all 4k settings, while the VIA Nano QuadCore L4700 still has additional frame-generation headroom. The FPS ceiling is closely matched at 1080p (low/medium).
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.
At 4k ultra, the GeForce RTX 4090 sets the ceiling at about 9 FPS, while the VIA Nano QuadCore L4700 has headroom up to 40 FPS. In this scenario, the GPU limits the CPU potential by 78% (FPS gap: 31 FPS). Overall distribution: GPU limits 10/12 cells, CPU limits 0/12, balanced 2/12.
Your GeForce RTX 4090 is the limiting side in the heaviest mismatch. This means part of the VIA Nano QuadCore L4700 frame-generation potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | Balanced | Balanced | GPU Limits CPU 30% | GPU Limits CPU 57% |
| 1440p (2K QHD) | GPU Limits CPU 28% | GPU Limits CPU 45% | GPU Limits CPU 53% | GPU Limits CPU 70% |
| 4K (Ultra HD) | GPU Limits CPU 57% | GPU Limits CPU 60% | GPU Limits CPU 73% | GPU Limits CPU 78% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your hardware is below minimum requirements. CPU is the limiting factor (88% below minimum). Expect performance issues. Low settings recommended.
-92%vsrecommended
+183%vsrecommended
-88%vsminimum
+521%vsminimum
The VIA Nano QuadCore L4700 and GeForce RTX 4090 will struggle to run Throne and Liberty at smooth framerates. At 1080p Ultra, you can expect around 13 FPS which is classified as "struggling". Consider lowering settings or upgrading your hardware.
Price data is not currently available for this combination. In general, look for setups where the CPU and GPU are balanced — this ensures you're not overspending on one component that the other can't keep up with.
Your GeForce RTX 4090 is already a top-tier graphics card. While it's technically the limiting factor here (which means you are fully utilizing your GPU's visual horsepower exactly as intended), there is no meaningful upgrade path that would drastically improve your Throne and Liberty performance right now. GPU fully utilized at: 1080p high, 1080p ultra, 1440p low, 1440p medium, 1440p high, 1440p ultra, 4k low, 4k medium, 4k high, 4k ultra.
Throne and Liberty does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Throne and Liberty requires at minimum a Core i5-7700 (CPU) and GeForce GTX 960 (GPU) with 16 GB RAM and 63 GB storage. For the recommended experience, you need a Core i5-11600K and GeForce GTX 1660 with 16 GB RAM. Your hardware falls below the minimum requirements for this game, which may result in poor performance.
These Throne and Liberty FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
