A competitor to Overwatch featuring environmental destruction, which makes it CPU heavy. DX12 and 12GB of RAM are the minimum requirements.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, all quality settings exceed 228 FPS, suitable for 144Hz+ monitors. At 1440p, all settings exceed 167 FPS. At 4K, all settings exceed 80 FPS.
The GeForce RTX 4090 is 131% above the recommended GPU (GeForce RTX 2060 Super) for Marvel Rivals. The Xeon D-2775TE is 25% above the recommended CPU (Core i5-10400).
The Xeon D-2775TE sets the FPS ceiling at all 1080p settings, all 1440p settings, all 4k settings, while the GeForce RTX 4090 still has headroom.
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.
At 4k ultra, the Xeon D-2775TE sets the ceiling at about 80 FPS, while the GeForce RTX 4090 could reach 116 FPS. In this scenario, the CPU limits the GPU potential by 31% (FPS gap: 36 FPS). Overall distribution: CPU limits 12/12 cells, GPU limits 0/12, balanced 0/12.
Your Xeon D-2775TE is the limiting side in the heaviest mismatch. This means part of the GeForce RTX 4090 rendering potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU Limits GPU 7% | CPU Limits GPU 10% | CPU Limits GPU 10% | CPU Limits GPU 14% |
| 1440p (2K QHD) | CPU Limits GPU 13% | CPU Limits GPU 18% | CPU Limits GPU 19% | CPU Limits GPU 24% |
| 4K (Ultra HD) | CPU Limits GPU 21% | CPU Limits GPU 27% | CPU Limits GPU 26% | CPU Limits GPU 31% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU39% - 59% <> GPU84% - 88% <> | CPU39% - 59% <> GPU84% - 87% <> | CPU39% - 59% <> GPU84% - 87% <> | CPU42% - 60% <> GPU83% - 87% <> |
| 1440p (2K QHD) | CPU38% - 59% <> GPU86% - 89% <> | CPU38% - 58% <> GPU86% - 88% <> | CPU38% - 58% <> GPU86% - 88% <> | CPU38% - 58% <> GPU86% - 88% <> |
| 4K (Ultra HD) | CPU23% - 48% <> GPU84% - 88% <> | CPU23% - 48% <> GPU84% - 88% <> | CPU23% - 48% <> GPU84% - 88% <> | CPU23% - 48% <> GPU84% - 88% <> |
The Xeon D-2775TE + GeForce RTX 4090 pairing runs this title with CPU utilization between 23% and 60% and GPU utilization between 83% and 89%. Xeon D-2775TE keeps significant headroom across presets, while GeForce RTX 4090 is utilized efficiently without persistent saturation. As resolution scales, average GPU load rises from 86% at 1080p to 86% at 4K, while CPU averages move from 50% to 36%.
The utilization pattern is relatively even. The GeForce RTX 4090 reaches 88% average at its highest-load preset, while the Xeon D-2775TE peaks at 51% average. This suggests a fairly controlled load distribution, but the actual FPS-limiting side should still be read from the limiter analysis above.
At 1080p, averages sit around CPU 50% and GPU 86%. At 1440p, that shifts to CPU 48% and GPU 87%, and at 4K it reaches CPU 36% and GPU 86%. This shows that workload scaling is present on both components, with stronger pressure on the GPU.
1440p (2K QHD) Low is the most balanced preset based on this dataset. It runs around CPU 48% (38-59%) and GPU 88% (86-89%), which keeps GeForce RTX 4090 well utilized without constant max-out behavior while Xeon D-2775TE remains stable for consistent frame delivery.
Current utilization does not show an urgent upgrade requirement for either component; the Xeon D-2775TE and GeForce RTX 4090 remain reasonably matched for this title.
Understanding Hardware Utilization: These percentages represent how much of your component's maximum processing power is actively being used during gameplay. They describe hardware load, but they do not directly tell you which component sets the FPS ceiling.
Important: a CPU or GPU can still be the FPS limiter without reaching 100% utilization. Two processors can both show 40% usage and still deliver very different frame rates, depending on per-core speed, cache, engine threading, driver overhead, and frame preparation efficiency.
Data generated by our Machine Learning engine trained on real-world benchmarks. Shows the approximate average utilization at each setting.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 25% above and your GPU is 131% above the recommended specs. High/Ultra at 1080p. Lower settings for higher resolutions.
+25%vsrecommended
+131%vsrecommended
+110%vsminimum
+279%vsminimum
Yes, the Xeon D-2775TE paired with the GeForce RTX 4090 can run Marvel Rivals smoothly up to 4k achieving around 80 FPS at Ultra quality. Your GPU is 131% above the recommended specs, and your CPU is 25% above the recommended requirements.
Price data is not currently available for this combination. In general, look for setups where the CPU and GPU are balanced — this ensures you're not overspending on one component that the other can't keep up with.
For Marvel Rivals, upgrading the CPU would have the biggest impact on performance. The Xeon D-2775TE is currently the limiting factor — the GeForce RTX 4090 has extra headroom that a faster processor could take advantage of. This is especially noticeable at 1080p where CPU performance matters more. CPU-limited at: 1080p low, 1080p medium, 1080p high, 1080p ultra, 1440p low, 1440p medium, 1440p high, 1440p ultra, 4k low, 4k medium, 4k high, 4k ultra.
Marvel Rivals does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Marvel Rivals requires at minimum a Core i5-6600K (CPU) and GeForce GTX 1060 (GPU) with 12 GB RAM and 70 GB storage. For the recommended experience, you need a Core i5-10400 and GeForce RTX 2060 Super with 16 GB RAM. Your Xeon D-2775TE and GeForce RTX 4090 both exceed the recommended specs, so you're well-positioned for a great experience.
These Marvel Rivals FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
