PUBG: BATTLEGROUNDSFPS onXeon E-2324G&GeForce RTX 4090

PUBG: BATTLEGROUNDS

PUBG has improved significantly since its early access days but remains a demanding title. Large maps require aggressive asset streaming, making it sensitive to RAM and storage speed. 16GB of RAM is practically mandatory; with only 8GB, you will likely experience stuttering. An SSD is also crucial to ensure textures and buildings load in on time.

PUBG: BATTLEGROUNDS - FPS Estimates by Resolution

Actual FPS may vary based on RAM speed, background processes, and other system factors

1080P
low214 FPS
medium169 FPS
high152 FPS
ultra110 FPS
1440P
low156 FPS
medium137 FPS
high128 FPS
ultra102 FPS
4K
low90 FPS
medium82 FPS
high77 FPS
ultra61 FPS

Performance Report

PUBG: BATTLEGROUNDS

GeForce RTX 4090 + Xeon E-2324G
🎮Visual Experience

At 1080p, all quality settings exceed 110 FPS. At 1440p, all settings exceed 102 FPS. At 4K, all settings exceed 61 FPS.

Official Requirements

The GeForce RTX 4090 is 279% above the recommended GPU (GeForce GTX 1060) for PUBG: BATTLEGROUNDS. The Xeon E-2324G is 16% below recommended, but 122% above minimum.

⚙️FPS Ceiling Analysis

The Xeon E-2324G sets the FPS ceiling at all 1080p settings, all 1440p settings, all 4k settings, while the GeForce RTX 4090 still has headroom.

Performance Limiter Analysis

Xeon E-2324G|GeForce RTX 4090

This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.

📈Analysis

At 4k medium, the Xeon E-2324G sets the ceiling at about 81 FPS, while the GeForce RTX 4090 could reach 254 FPS. In this scenario, the CPU limits the GPU potential by 68% (FPS gap: 173 FPS). Overall distribution: CPU limits 12/12 cells, GPU limits 0/12, balanced 0/12.

Verdict

CPU Limits GPU

Your Xeon E-2324G is the limiting side in the heaviest mismatch. This means part of the GeForce RTX 4090 rendering potential remains unused in those settings.

🧩Detailed Breakdown
1080p (Full HD)
LowCPU Limits GPU 49%
MediumCPU Limits GPU 53%
HighCPU Limits GPU 47%
UltraCPU Limits GPU 59%
1440p (2K QHD)
LowCPU Limits GPU 55%
MediumCPU Limits GPU 57%
HighCPU Limits GPU 49%
UltraCPU Limits GPU 59%
4K (Ultra HD)
LowCPU Limits GPU 66%
MediumCPU Limits GPU 68%
HighCPU Limits GPU 60%
UltraCPU Limits GPU 63%
Percentages show how much potential FPS of the stronger component is lost because the other component has a lower FPS ceiling.
🧠Methodology

We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.

Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.

CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.

A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.

📊Predicted Hardware Utilization for Xeon E-2324G and GeForce RTX 4090

1080p (Full HD)

Low
CPU68% - 92%
<>
GPU64% - 91%
<>
Medium
CPU39% - 73%
<>
GPU63% - 89%
<>
High
CPU39% - 73%
<>
GPU63% - 89%
<>
Ultra
CPU40% - 83%
<>
GPU61% - 87%
<>

1440p (2K QHD)

Low
CPU69% - 95%
<>
GPU69% - 91%
<>
Medium
CPU40% - 76%
<>
GPU89% - 100%
<>
High
CPU40% - 76%
<>
GPU89% - 100%
<>
Ultra
CPU40% - 74%
<>
GPU92% - 100%
<>

4K (Ultra HD)

Low
CPU69% - 96%
<>
GPU69% - 91%
<>
Medium
CPU40% - 77%
<>
GPU87% - 100%
<>
High
CPU40% - 77%
<>
GPU87% - 100%
<>
Ultra
CPU40% - 75%
<>
GPU90% - 100%
<>

Performance Summary

The Xeon E-2324G + GeForce RTX 4090 pairing runs this title with CPU utilization between 39% and 96% and GPU utilization between 61% and 100%. Xeon E-2324G stays in a controlled operating range, while GeForce RTX 4090 carries most of the graphics load at heavier visual settings. As resolution scales, average GPU load rises from 76% at 1080p to 91% at 4K, while CPU averages move from 64% to 64%.

Load Interpretation

From a utilization perspective, this is a GPU-heavy load profile. At 1440p (2K QHD) Ultra, the GeForce RTX 4090 averages 96% usage (92-100%), while the Xeon E-2324G stays at 57% (40-74%). This shows the graphics pipeline is carrying most of the workload, but utilization alone does not define the FPS limiter.

Resolution Scaling

At 1080p, averages sit around CPU 64% and GPU 76%. At 1440p, that shifts to CPU 64% and GPU 91%, and at 4K it reaches CPU 64% and GPU 91%. This shows that GPU demand scales sharply with resolution while CPU load remains comparatively stable.

Optimal Settings Recommendation

1440p (2K QHD) Medium is the most balanced preset based on this dataset. It runs around CPU 58% (40-76%) and GPU 94% (89-100%), which keeps GeForce RTX 4090 well utilized without constant max-out behavior while Xeon E-2324G remains stable for consistent frame delivery.

Upgrade Insight

Current utilization does not show an urgent upgrade requirement for either component; the Xeon E-2324G and GeForce RTX 4090 remain reasonably matched for this title.

Understanding Hardware Utilization: These percentages represent how much of your component's maximum processing power is actively being used during gameplay. They describe hardware load, but they do not directly tell you which component sets the FPS ceiling.

Important: a CPU or GPU can still be the FPS limiter without reaching 100% utilization. Two processors can both show 40% usage and still deliver very different frame rates, depending on per-core speed, cache, engine threading, driver overhead, and frame preparation efficiency.

  • High GPU Load: You typically want to see High GPU Utilization (90%+) and moderate CPU usage when visual settings are heavy. This indicates the graphics pipeline is under strong load, but the exact FPS limiter should still be confirmed by the FPS ceiling analysis.
  • High CPU Load: If you see High CPU Utilization (85%+) paired with lower GPU utilization, the processor is handling a disproportionate share of frame preparation and game logic. That can point to CPU-side pressure, but it should not be treated as a direct replacement for FPS ceiling analysis.
  • Low CPU and GPU Load: If both CPU and GPU utilization are relatively low, it means the hardware is waiting on something else. This could be a game engine limitation, poorly optimized code, or an artificial framerate cap like VSync holding performance back. It does not mean both parts are equally fast in FPS terms.

Data generated by our Machine Learning engine trained on real-world benchmarks. Shows the approximate average utilization at each setting.

PUBG: BATTLEGROUNDS Requirements Comparison

See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.

CPU - Xeon E-2324G
cpu icon
10,339
Your Score
MinimumCore i5-4430
RecommendedCore i5-6600K
GPU - GeForce RTX 4090
gpu icon
38,112
Your Score
MinimumGeForce GTX 960
RecommendedGeForce GTX 1060

Your CPU is 16% below recommended and your GPU is 279% below recommended, but both meet minimum specs. Playable at Low/Medium settings, 1080p or below.

CPU

-16%vsrecommended

GPU

+279%vsrecommended

CPU

+122%vsminimum

GPU

+521%vsminimum

Minimum Requirements
Video Card: GeForce GTX 960
Processor: Core i5-4430
Memory: 8 GB
Disk Space: 40 GB
System: Windows 10 64-bit
Recommended Requirements
Video Card: GeForce GTX 1060
Processor: Core i5-6600K
Memory: 16 GB
Disk Space: 50 GB (SSD)
System: Windows 10 64-bit

Frequently Asked Questions

1Can the Xeon E-2324G and GeForce RTX 4090 run PUBG: BATTLEGROUNDS well?

Yes, the Xeon E-2324G paired with the GeForce RTX 4090 can run PUBG: BATTLEGROUNDS smoothly up to 4k achieving around 61 FPS at Ultra quality. Your GPU is 279% above the recommended specs, and your CPU is 16% below the recommended requirements.

2Is there a more cost-effective setup to run PUBG: BATTLEGROUNDS?

Price data is not currently available for this combination. In general, look for setups where the CPU and GPU are balanced — this ensures you're not overspending on one component that the other can't keep up with.

3Which component should I upgrade first to improve PUBG: BATTLEGROUNDS performance?

For PUBG: BATTLEGROUNDS, upgrading the CPU would have the biggest impact on performance. The Xeon E-2324G is currently the limiting factor — the GeForce RTX 4090 has extra headroom that a faster processor could take advantage of. This is especially noticeable at 1080p where CPU performance matters more. CPU-limited at: 1080p low, 1080p medium, 1080p high, 1080p ultra, 1440p low, 1440p medium, 1440p high, 1440p ultra, 4k low, 4k medium, 4k high, 4k ultra.

4Does this setup support Frame Generation for PUBG: BATTLEGROUNDS?

PUBG: BATTLEGROUNDS does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.

5What are the minimum and recommended specs for PUBG: BATTLEGROUNDS?

PUBG: BATTLEGROUNDS requires at minimum a Core i5-4430 (CPU) and GeForce GTX 960 (GPU) with 8 GB RAM and 40 GB storage. For the recommended experience, you need a Core i5-6600K and GeForce GTX 1060 with 16 GB RAM. Your setup meets the minimum requirements but falls short of the recommended specs. You may need to lower some settings for smooth performance.

6How accurate are these PUBG: BATTLEGROUNDS FPS estimates for the Xeon E-2324G and GeForce RTX 4090?

These PUBG: BATTLEGROUNDS FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.

Performance estimates are based on synthetic benchmarks and hardware capabilities.

Results may vary based on drivers, OS, and background processes.