Unlike shooters, Naraka focuses on melee combat with fluid animations. The game is visually dense and supports DLSS, which is vital for high frame rates at resolutions above 1080p. An SSD is critical for map loading, and 16GB of RAM is recommended for smooth gameplay.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, frame rates range from 25 to 68 FPS depending on quality settings. At 1440p, frame rates range from 11 to 33 FPS. At 4K, frame rates range from 6 to 15 FPS.
The GeForce RTX 4090 is 279% above the recommended GPU (GeForce GTX 1060) for Naraka: Bladepoint. The Xeon E3-1268L v5 is 52% below recommended, but 29% above minimum.
The GeForce RTX 4090 sets the FPS ceiling at all 1080p settings, all 1440p settings, all 4k settings, while the Xeon E3-1268L v5 still has additional frame-generation headroom.
Approximated average price on current market:
Combo price: $1742. At 1080p Ultra, this combo delivers 25 FPS, equivalent to 0.01 FPS per dollar.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p | 0.039 fps/$ | 0.029 fps/$ | 0.019 fps/$ | 0.014 fps/$ |
| 1440p | 0.019 fps/$ | 0.013 fps/$ | 0.009 fps/$ | 0.006 fps/$ |
| 4k | 0.009 fps/$ | 0.007 fps/$ | 0.005 fps/$ | 0.003 fps/$ |
* Table values represent FPS per Dollar (higher is better)
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.
At 4k ultra, the GeForce RTX 4090 sets the ceiling at about 11 FPS, while the Xeon E3-1268L v5 has headroom up to 49 FPS. In this scenario, the GPU limits the CPU potential by 78% (FPS gap: 38 FPS). Overall distribution: GPU limits 12/12 cells, CPU limits 0/12, balanced 0/12.
Your GeForce RTX 4090 is the limiting side in the heaviest mismatch. This means part of the Xeon E3-1268L v5 frame-generation potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | GPU Limits CPU 30% | GPU Limits CPU 42% | GPU Limits CPU 61% | GPU Limits CPU 67% |
| 1440p (2K QHD) | GPU Limits CPU 66% | GPU Limits CPU 66% | GPU Limits CPU 73% | GPU Limits CPU 73% |
| 4K (Ultra HD) | GPU Limits CPU 68% | GPU Limits CPU 71% | GPU Limits CPU 77% | GPU Limits CPU 78% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 52% below recommended and your GPU is 279% below recommended, but both meet minimum specs. Playable at Low/Medium settings, 1080p or below.
-52%vsrecommended
+279%vsrecommended
+29%vsminimum
+877%vsminimum
The Xeon E3-1268L v5 and GeForce RTX 4090 will struggle to run Naraka: Bladepoint at smooth framerates. At 1080p Ultra, you can expect around 25 FPS which is classified as "struggling". Consider lowering settings or upgrading your hardware.
This CPU + GPU combo costs approximately $1742 ($93 CPU + $1649 GPU). Your GeForce RTX 4090 provides phenomenal top-tier performance but at a premium enthusiast price. Since you are essentially at the ceiling of current hardware capabilities, there are no meaningful performance upgrades available. However, if you wanted a more cost-effective build that still delivers a great experience, you could theoretically step down to a high-end card with a significantly better value rating.
Your GeForce RTX 4090 is already a top-tier graphics card. While it's technically the limiting factor here (which means you are fully utilizing your GPU's visual horsepower exactly as intended), there is no meaningful upgrade path that would drastically improve your Naraka: Bladepoint performance right now. GPU fully utilized at: 1080p low, 1080p medium, 1080p high, 1080p ultra, 1440p low, 1440p medium, 1440p high, 1440p ultra, 4k low, 4k medium, 4k high, 4k ultra.
Naraka: Bladepoint does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Naraka: Bladepoint requires at minimum a Core i5-4460 (CPU) and GeForce GTX 750 Ti (GPU) with 8 GB RAM and 20 GB storage. For the recommended experience, you need a Core i7-7700 and GeForce GTX 1060 with 16 GB RAM. Your setup meets the minimum requirements but falls short of the recommended specs. You may need to lower some settings for smooth performance.
These Naraka: Bladepoint FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
