Apex Legends
Built on a modified Source engine, Apex Legends retains the scalability of Titanfall 2. Fast movement demands high frame rates for fluidity. VRAM can be a bottleneck if the 'Texture Streaming Budget' is set too high. While it handles 8GB of RAM better than some competitors, 16GB is recommended. It is generally less CPU-intensive than Warzone, allowing older quad-core CPUs to remain viable.
This game has a built-in FPS cap of 300 FPS
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, all quality settings exceed 208 FPS, suitable for 144Hz+ monitors. At 1440p, all settings exceed 179 FPS. At 4K, all settings exceed 131 FPS.
The GeForce RTX 5090 is 303% above the recommended GPU (GeForce GTX 970) for Apex Legends. The Xeon E3-1270 v5 is 8% below recommended, but 92% above minimum.
The Xeon E3-1270 v5 sets the FPS ceiling at all 1080p settings, all 1440p settings, all 4k settings, while the GeForce RTX 5090 still has headroom.
This chart answers a simple question: which upgrade is more likely to increase FPS first? In this case, the answer is clearly the CPU.
The largest gap appears at 1080p Low, where the Xeon E3-1270 v5 reaches about 208 FPS, while the GeForce RTX 5090 still has headroom up to roughly 450 FPS.
That means the Xeon E3-1270 v5 is hitting its performance ceiling first, leaving a 54% gap versus the GeForce RTX 5090's available headroom in the most unbalanced scenario. Across all tested settings, this pairing is CPU-limited in 12 out of 12 cases, with 0 GPU-limited and 0 balanced results.
Overall, this is a clearly CPU-bound combination in this game.
The Xeon E3-1270 v5 is consistently the limiting part in this game, so upgrading the CPU is more likely to deliver a larger FPS gain than upgrading the GPU.
This chart shows which upgrade is more likely to unlock more FPS in each tested setting. The lower line represents the part that reaches its limit first. When the CPU and GPU lines stay close together, the system is more balanced. When the gap widens, one component is more clearly holding the other back. Hover any setting to inspect it.
The lower line is the current limiter. The closer the two lines are, the more balanced the CPU and GPU are for this game.
Each line represents an estimated FPS ceiling for one component, rather than live usage alone.
To estimate the CPU ceiling, we pair the Xeon E3-1270 v5 with GeForce RTX 5090, our current GPU anchor. To estimate the GPU ceiling, we pair the GeForce RTX 5090 with Ryzen 9 9950X3D, our current CPU anchor.
The lower line indicates the current limiter, since that component reaches its FPS ceiling first. In most scenarios, that is also the part most likely to deliver the bigger performance uplift if upgraded first.
The percentage shown represents the gap between the two ceilings. In practical terms, it shows how much of the stronger component's potential is left unused because the weaker one becomes the bottleneck first.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 8% below recommended and your GPU is 303% below recommended, but both meet minimum specs. Playable at Low/Medium settings, 1080p or below.
-8%vsrecommended
+303%vsrecommended
+92%vsminimum
+3225%vsminimum
Yes, the Xeon E3-1270 v5 paired with the GeForce RTX 5090 can run Apex Legends smoothly up to 4k achieving around 131 FPS at Ultra quality. Your GPU is 303% above the recommended specs, and your CPU is 8% below the recommended requirements.
Price data is not currently available for this combination. In general, look for setups where the CPU and GPU are balanced - this ensures you're not overspending on one component that the other can't keep up with.
For Apex Legends, upgrading the CPU would usually improve performance first. In the Performance Limiter Analysis, the Xeon E3-1270 v5 is the side that most often caps the frame rate, while the GeForce RTX 5090 still has additional headroom in the tested presets. The main bottleneck appears on the CPU side. The largest gap shows up at 1080p Low, where the CPU reaches about 208 FPS while the GPU still has headroom up to roughly 450 FPS. Across all tested settings, the distribution is 0/12 GPU-limited, 12/12 CPU-limited, and 0/12 balanced.
Apex Legends does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Apex Legends requires at minimum a Core i3-6300 (CPU) and GeForce GT 640 (GPU) with 6 GB RAM and 56 GB storage. For the recommended experience, you need a Core i5-3570K and GeForce GTX 970 with 8 GB RAM. Your setup meets the minimum requirements but falls short of the recommended specs. You may need to lower some settings for smooth performance.
These Apex Legends FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
