A dense RPG where Act 3 becomes a CPU stress test due to the high number of NPCs. An SSD is vital for loading times. 16GB of RAM is recommended, and the game benefits greatly from upscaling tech like DLSS and FSR.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, all quality settings exceed 87 FPS. At 1440p, all settings exceed 70 FPS. At 4K, frame rates range from 36 to 74 FPS.
The GeForce RTX 4090 is 131% above the recommended GPU (GeForce RTX 2060 Super) for Baldur's Gate 3. The Xeon E3-1275 v6 is 48% below recommended, but 55% above minimum.
The Xeon E3-1275 v6 sets the FPS ceiling at all 1080p settings, all 1440p settings, all 4k settings, while the GeForce RTX 4090 still has headroom.
Approximated average price on current market:
Combo price: $1791. At 1080p Ultra, this combo delivers 87 FPS, equivalent to 0.05 FPS per dollar.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p | 0.090 fps/$ | 0.079 fps/$ | 0.060 fps/$ | 0.049 fps/$ |
| 1440p | 0.077 fps/$ | 0.066 fps/$ | 0.050 fps/$ | 0.039 fps/$ |
| 4k | 0.041 fps/$ | 0.035 fps/$ | 0.028 fps/$ | 0.020 fps/$ |
* Table values represent FPS per Dollar (higher is better)
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.
At 1080p ultra, the Xeon E3-1275 v6 sets the ceiling at about 86 FPS, while the GeForce RTX 4090 could reach 163 FPS. In this scenario, the CPU limits the GPU potential by 47% (FPS gap: 77 FPS). Overall distribution: CPU limits 12/12 cells, GPU limits 0/12, balanced 0/12.
Your Xeon E3-1275 v6 is the limiting side in the heaviest mismatch. This means part of the GeForce RTX 4090 rendering potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU Limits GPU 40% | CPU Limits GPU 38% | CPU Limits GPU 43% | CPU Limits GPU 47% |
| 1440p (2K QHD) | CPU Limits GPU 12% | CPU Limits GPU 9% | CPU Limits GPU 16% | CPU Limits GPU 30% |
| 4K (Ultra HD) | CPU Limits GPU 23% | CPU Limits GPU 21% | CPU Limits GPU 22% | CPU Limits GPU 35% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU72% - 100% <> GPU52% - 85% <> | CPU66% - 100% <> GPU57% - 85% <> | CPU46% - 100% <> GPU63% - 91% <> | CPU46% - 100% <> GPU81% - 93% <> |
| 1440p (2K QHD) | CPU69% - 100% <> GPU58% - 88% <> | CPU63% - 100% <> GPU64% - 87% <> | CPU43% - 100% <> GPU69% - 93% <> | CPU43% - 100% <> GPU87% - 93% <> |
| 4K (Ultra HD) | CPU72% - 100% <> GPU59% - 89% <> | CPU66% - 100% <> GPU63% - 88% <> | CPU47% - 100% <> GPU69% - 95% <> | CPU48% - 100% <> GPU84% - 94% <> |
The Xeon E3-1275 v6 + GeForce RTX 4090 pairing runs this title with CPU utilization between 43% and 100% and GPU utilization between 52% and 95%. Xeon E3-1275 v6 reaches high load in heavier scenarios, while GeForce RTX 4090 carries most of the graphics load at heavier visual settings. As resolution scales, average GPU load rises from 76% at 1080p to 80% at 4K, while CPU averages move from 79% to 79%.
From a utilization perspective, this is a CPU-heavy load profile. At 1080p (Full HD) Low, the Xeon E3-1275 v6 reaches 86% average load (72-100%), while the GeForce RTX 4090 remains comparatively lower at 68% (52-85%). This points to heavier CPU-side frame preparation work, but utilization alone does not define the FPS limiter.
At 1080p, averages sit around CPU 79% and GPU 76%. At 1440p, that shifts to CPU 78% and GPU 80%, and at 4K it reaches CPU 79% and GPU 80%. This shows that workload scaling is limited, which can indicate engine-side constraints.
1080p (Full HD) Ultra is the most balanced preset based on this dataset. It runs around CPU 73% (46-100%) and GPU 87% (81-93%), which keeps GeForce RTX 4090 well utilized without constant max-out behavior while Xeon E3-1275 v6 remains stable for consistent frame delivery.
Current utilization does not show an urgent upgrade requirement for either component; the Xeon E3-1275 v6 and GeForce RTX 4090 remain reasonably matched for this title.
Understanding Hardware Utilization: These percentages represent how much of your component's maximum processing power is actively being used during gameplay. They describe hardware load, but they do not directly tell you which component sets the FPS ceiling.
Important: a CPU or GPU can still be the FPS limiter without reaching 100% utilization. Two processors can both show 40% usage and still deliver very different frame rates, depending on per-core speed, cache, engine threading, driver overhead, and frame preparation efficiency.
Data generated by our Machine Learning engine trained on real-world benchmarks. Shows the approximate average utilization at each setting.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 48% below recommended and your GPU is 131% below recommended, but both meet minimum specs. Playable at Low/Medium settings, 1080p or below.
-48%vsrecommended
+131%vsrecommended
+55%vsminimum
+295%vsminimum
Yes, the Xeon E3-1275 v6 paired with the GeForce RTX 4090 can run Baldur's Gate 3 smoothly up to 1440p achieving around 70 FPS at Ultra quality. Your GPU is 131% above the recommended specs, and your CPU is 48% below the recommended requirements.
This CPU + GPU combo costs approximately $1791 ($142 CPU + $1649 GPU (Rank #77 Value)). Since the CPU is the main limiting factor, investing in a stronger processor will improve your framerates and overall value. For example, the Xeon Platinum 8454H is a great upgrade option for around $6540 (Rank #1 for value).
For Baldur's Gate 3, upgrading the CPU would have the biggest impact on performance. The Xeon E3-1275 v6 is currently the limiting factor — the GeForce RTX 4090 has extra headroom that a faster processor could take advantage of. This is especially noticeable at 1080p where CPU performance matters more. CPU-limited at: 1080p low, 1080p medium, 1080p high, 1080p ultra, 1440p low, 1440p medium, 1440p high, 1440p ultra, 4k low, 4k medium, 4k high, 4k ultra.
Baldur's Gate 3 does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Baldur's Gate 3 requires at minimum a Core i5-4690 (CPU) and GeForce GTX 970 (GPU) with 8 GB RAM and 150 GB (SSD) storage. For the recommended experience, you need a Core i7-8700K and GeForce RTX 2060 Super with 16 GB RAM. Your setup meets the minimum requirements but falls short of the recommended specs. You may need to lower some settings for smooth performance.
These Baldur's Gate 3 FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
