Starfield
Bethesda's Creation Engine 2 is CPU-dependent, especially in cities, and requires an SSD for asset streaming. Optimization tends to favor AMD slightly, but generally requires powerful hardware to run smoothly.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, all quality settings exceed 75 FPS. At 1440p, all settings exceed 66 FPS. At 4K, frame rates range from 36 to 70 FPS.
The GeForce RTX 4090 is 52% above the recommended GPU (GeForce RTX 2080) for Starfield. The Xeon E3-1285 v6 is 32% below minimum CPU requirement.
The GeForce RTX 4090 sets the FPS ceiling at all 1080p settings, all 1440p settings, all 4k settings, while the Xeon E3-1285 v6 still has additional frame-generation headroom.
This chart answers a simple question: which upgrade is more likely to increase FPS first? In this case, the answer is clearly the GPU.
The largest gap appears at 1080p High, where the GeForce RTX 4090 reaches about 111 FPS, while the Xeon E3-1285 v6 still has headroom up to roughly 136 FPS.
That means the GeForce RTX 4090 is hitting its performance ceiling first, leaving a 18% gap versus the Xeon E3-1285 v6's available headroom in the most unbalanced scenario. Across all tested settings, this pairing is GPU-limited in 12 out of 12 cases, with 0 CPU-limited and 0 balanced results.
Overall, this is a clearly GPU-bound combination in this game.
The GeForce RTX 4090 is consistently the limiting part in this game, so upgrading the GPU is more likely to deliver a larger FPS gain than upgrading the CPU.
This chart shows which upgrade is more likely to unlock more FPS in each tested setting. The lower line represents the part that reaches its limit first. When the CPU and GPU lines stay close together, the system is more balanced. When the gap widens, one component is more clearly holding the other back. Hover any setting to inspect it.
The lower line is the current limiter. The closer the two lines are, the more balanced the CPU and GPU are for this game.
Each line represents an estimated FPS ceiling for one component, rather than live usage alone.
To estimate the CPU ceiling, we pair the Xeon E3-1285 v6 with GeForce RTX 5090, our current GPU anchor. To estimate the GPU ceiling, we pair the GeForce RTX 4090 with Ryzen 9 9950X3D, our current CPU anchor.
The lower line indicates the current limiter, since that component reaches its FPS ceiling first. In most scenarios, that is also the part most likely to deliver the bigger performance uplift if upgraded first.
The percentage shown represents the gap between the two ceilings. In practical terms, it shows how much of the stronger component's potential is left unused because the weaker one becomes the bottleneck first.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your hardware is below minimum requirements. CPU is the limiting factor (32% below minimum). Expect performance issues. Low settings recommended.
-48%vsrecommended
+52%vsrecommended
-32%vsminimum
+160%vsminimum
Yes, the Xeon E3-1285 v6 paired with the GeForce RTX 4090 can run Starfield smoothly up to 1440p achieving around 66 FPS at Ultra quality. Your GPU is 52% above the recommended specs, and your CPU is 48% below the recommended requirements.
Price data is not currently available for this combination. In general, look for setups where the CPU and GPU are balanced - this ensures you're not overspending on one component that the other can't keep up with.
Your GeForce RTX 4090 is already a top-tier graphics card. In the Performance Limiter Analysis, it is still the side that most often reaches its FPS ceiling first, but there is no meaningful upgrade path that would drastically improve your Starfield performance right now. The main bottleneck appears on the GPU side. The largest gap shows up at 1080p High, where the GPU reaches about 111 FPS while the CPU still has headroom up to roughly 136 FPS. Across all tested settings, the distribution is 12/12 GPU-limited, 0/12 CPU-limited, and 0/12 balanced.
Starfield does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Starfield requires at minimum a Core i7-6800K (CPU) and GeForce GTX 1070 Ti (GPU) with 16 GB RAM and 125 GB (SSD Obrigatório) storage. For the recommended experience, you need a Core i5-10600K and GeForce RTX 2080 with 16 GB RAM. Your hardware falls below the minimum requirements for this game, which may result in poor performance.
These Starfield FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
