Built for massive sieges, this MMO creates a significant CPU bottleneck in large battles. 16GB of RAM is the minimum, setting a standard for next-gen MMOs.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, all quality settings exceed 73 FPS. At 1440p, all settings exceed 62 FPS. At 4K, frame rates range from 40 to 84 FPS.
The GeForce RTX 4090 is 183% above the recommended GPU (GeForce GTX 1660) for Throne and Liberty. The Xeon E5-1620 v3 is 47% below minimum CPU requirement.
The Xeon E5-1620 v3 sets the FPS ceiling at all 1080p settings, all 1440p settings, all 4k settings, while the GeForce RTX 4090 still has headroom.
Approximated average price on current market:
Combo price: $1838. At 1080p Ultra, this combo delivers 73 FPS, equivalent to 0.04 FPS per dollar.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p | 0.094 fps/$ | 0.066 fps/$ | 0.055 fps/$ | 0.040 fps/$ |
| 1440p | 0.074 fps/$ | 0.053 fps/$ | 0.045 fps/$ | 0.034 fps/$ |
| 4k | 0.046 fps/$ | 0.035 fps/$ | 0.029 fps/$ | 0.022 fps/$ |
* Table values represent FPS per Dollar (higher is better)
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.
At 4k ultra, the Xeon E5-1620 v3 sets the ceiling at about 40 FPS, while the GeForce RTX 4090 could reach 95 FPS. In this scenario, the CPU limits the GPU potential by 58% (FPS gap: 55 FPS). Overall distribution: CPU limits 12/12 cells, GPU limits 0/12, balanced 0/12.
Your Xeon E5-1620 v3 is the limiting side in the heaviest mismatch. This means part of the GeForce RTX 4090 rendering potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU Limits GPU 43% | CPU Limits GPU 50% | CPU Limits GPU 45% | CPU Limits GPU 55% |
| 1440p (2K QHD) | CPU Limits GPU 42% | CPU Limits GPU 49% | CPU Limits GPU 46% | CPU Limits GPU 53% |
| 4K (Ultra HD) | CPU Limits GPU 54% | CPU Limits GPU 57% | CPU Limits GPU 52% | CPU Limits GPU 58% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your hardware is below minimum requirements. CPU is the limiting factor (47% below minimum). Expect performance issues. Low settings recommended.
-64%vsrecommended
+183%vsrecommended
-47%vsminimum
+521%vsminimum
Yes, the Xeon E5-1620 v3 paired with the GeForce RTX 4090 can run Throne and Liberty smoothly up to 1440p achieving around 62 FPS at Ultra quality. Your GPU is 183% above the recommended specs, and your CPU is 64% below the recommended requirements.
This CPU + GPU combo costs approximately $1838 ($189 CPU + $1649 GPU (Rank #77 Value)). Since the CPU is the main limiting factor, investing in a stronger processor will improve your framerates and overall value. For example, the Xeon Platinum 8454H is a great upgrade option for around $6540 (Rank #1 for value).
For Throne and Liberty, upgrading the CPU would have the biggest impact on performance. The Xeon E5-1620 v3 is currently the limiting factor — the GeForce RTX 4090 has extra headroom that a faster processor could take advantage of. This is especially noticeable at 1080p where CPU performance matters more. CPU-limited at: 1080p low, 1080p medium, 1080p high, 1080p ultra, 1440p low, 1440p medium, 1440p high, 1440p ultra, 4k low, 4k medium, 4k high, 4k ultra.
Throne and Liberty does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Throne and Liberty requires at minimum a Core i5-7700 (CPU) and GeForce GTX 960 (GPU) with 16 GB RAM and 63 GB storage. For the recommended experience, you need a Core i5-11600K and GeForce GTX 1660 with 16 GB RAM. Your hardware falls below the minimum requirements for this game, which may result in poor performance.
These Throne and Liberty FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
