Optimized for mobile roots, the PC version offers higher resolution textures and volumetric shadows while keeping minimum specs low. It is light on the CPU but requires a dedicated GPU for stable 1080p/60FPS gameplay.
This game has a built-in FPS cap of 60 FPS
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, frame rates range from 37 to 60 FPS depending on quality settings. At 1440p, frame rates range from 36 to 59 FPS. At 4K, frame rates range from 22 to 43 FPS.
The GeForce RTX 4090 is 279% above the recommended GPU (GeForce GTX 1060) for Genshin Impact. The Xeon E5-2603 v4 is 66% below minimum CPU requirement.
The Xeon E5-2603 v4 sets the FPS ceiling at all 1080p settings, all 1440p settings, all 4k settings, while the GeForce RTX 4090 still has headroom.
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.
At 1080p ultra, the Xeon E5-2603 v4 sets the ceiling at about 37 FPS, while the GeForce RTX 4090 could reach 159 FPS. In this scenario, the CPU limits the GPU potential by 77% (FPS gap: 122 FPS). Overall distribution: CPU limits 12/12 cells, GPU limits 0/12, balanced 0/12.
Your Xeon E5-2603 v4 is the limiting side in the heaviest mismatch. This means part of the GeForce RTX 4090 rendering potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU Limits GPU 57% | CPU Limits GPU 64% | CPU Limits GPU 73% | CPU Limits GPU 77% |
| 1440p (2K QHD) | CPU Limits GPU 43% | CPU Limits GPU 52% | CPU Limits GPU 65% | CPU Limits GPU 70% |
| 4K (Ultra HD) | CPU Limits GPU 57% | CPU Limits GPU 65% | CPU Limits GPU 72% | CPU Limits GPU 77% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU40% - 57% <> GPU23% - 48% <> | CPU40% - 57% <> GPU23% - 48% <> | CPU40% - 57% <> GPU23% - 48% <> | CPU30% - 46% <> GPU24% - 47% <> |
| 1440p (2K QHD) | CPU40% - 57% <> GPU54% - 71% <> | CPU40% - 57% <> GPU54% - 71% <> | CPU40% - 57% <> GPU54% - 71% <> | CPU29% - 46% <> GPU56% - 70% <> |
| 4K (Ultra HD) | CPU40% - 57% <> GPU71% - 94% <> | CPU40% - 57% <> GPU71% - 94% <> | CPU40% - 57% <> GPU71% - 94% <> | CPU28% - 46% <> GPU73% - 94% <> |
The Xeon E5-2603 v4 + GeForce RTX 4090 pairing runs this title with CPU utilization between 28% and 57% and GPU utilization between 23% and 94%. Xeon E5-2603 v4 keeps significant headroom across presets, while GeForce RTX 4090 is utilized efficiently without persistent saturation. As resolution scales, average GPU load rises from 36% at 1080p to 83% at 4K, while CPU averages move from 46% to 45%.
The utilization pattern is relatively even. The GeForce RTX 4090 reaches 84% average at its highest-load preset, while the Xeon E5-2603 v4 peaks at 48% average. This suggests a fairly controlled load distribution, but the actual FPS-limiting side should still be read from the limiter analysis above.
At 1080p, averages sit around CPU 46% and GPU 36%. At 1440p, that shifts to CPU 46% and GPU 62%, and at 4K it reaches CPU 45% and GPU 83%. This shows that GPU demand scales sharply with resolution while CPU load remains comparatively stable.
4K (Ultra HD) Ultra is the most balanced preset based on this dataset. It runs around CPU 37% (28-46%) and GPU 84% (73-94%), which keeps GeForce RTX 4090 well utilized without constant max-out behavior while Xeon E5-2603 v4 remains stable for consistent frame delivery.
Current utilization does not show an urgent upgrade requirement for either component; the Xeon E5-2603 v4 and GeForce RTX 4090 remain reasonably matched for this title.
Understanding Hardware Utilization: These percentages represent how much of your component's maximum processing power is actively being used during gameplay. They describe hardware load, but they do not directly tell you which component sets the FPS ceiling.
Important: a CPU or GPU can still be the FPS limiter without reaching 100% utilization. Two processors can both show 40% usage and still deliver very different frame rates, depending on per-core speed, cache, engine threading, driver overhead, and frame preparation efficiency.
Data generated by our Machine Learning engine trained on real-world benchmarks. Shows the approximate average utilization at each setting.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your hardware is below minimum requirements. CPU is the limiting factor (66% below minimum). Expect performance issues. Low settings recommended.
-87%vsrecommended
+279%vsrecommended
-66%vsminimum
+1218%vsminimum
The Xeon E5-2603 v4 and GeForce RTX 4090 will struggle to run Genshin Impact at smooth framerates. At 1080p Ultra, you can expect around 37 FPS which is classified as "playable". Consider lowering settings or upgrading your hardware.
Price data is not currently available for this combination. In general, look for setups where the CPU and GPU are balanced — this ensures you're not overspending on one component that the other can't keep up with.
For Genshin Impact, upgrading the CPU would have the biggest impact on performance. The Xeon E5-2603 v4 is currently the limiting factor — the GeForce RTX 4090 has extra headroom that a faster processor could take advantage of. This is especially noticeable at 1080p where CPU performance matters more. CPU-limited at: 1080p low, 1080p medium, 1080p high, 1080p ultra, 1440p low, 1440p medium, 1440p high, 1440p ultra, 4k low, 4k medium, 4k high, 4k ultra.
Genshin Impact does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Genshin Impact requires at minimum a Core i5 (CPU) and GeForce GT 1030 (GPU) with 8 GB RAM and 100 GB storage. For the recommended experience, you need a Core i7 and GeForce GTX 1060 with 16 GB RAM. Your hardware falls below the minimum requirements for this game, which may result in poor performance.
These Genshin Impact FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
