Unlike shooters, Naraka focuses on melee combat with fluid animations. The game is visually dense and supports DLSS, which is vital for high frame rates at resolutions above 1080p. An SSD is critical for map loading, and 16GB of RAM is recommended for smooth gameplay.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, all quality settings exceed 139 FPS. At 1440p, all settings exceed 95 FPS. At 4K, frame rates range from 56 to 88 FPS.
The GeForce RTX 4090 is 279% above the recommended GPU (GeForce GTX 1060) for Naraka: Bladepoint. The Xeon E5-2643 v3 is 22% below recommended, but 109% above minimum.
The Xeon E5-2643 v3 sets the FPS ceiling at all 1080p settings, all 1440p settings, all 4k settings, while the GeForce RTX 4090 still has headroom.
Approximated average price on current market:
Combo price: $1694. At 1080p Ultra, this combo delivers 139 FPS, equivalent to 0.08 FPS per dollar.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p | 0.149 fps/$ | 0.113 fps/$ | 0.101 fps/$ | 0.082 fps/$ |
| 1440p | 0.106 fps/$ | 0.082 fps/$ | 0.071 fps/$ | 0.056 fps/$ |
| 4k | 0.052 fps/$ | 0.044 fps/$ | 0.038 fps/$ | 0.033 fps/$ |
* Table values represent FPS per Dollar (higher is better)
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.
At 1080p medium, the Xeon E5-2643 v3 sets the ceiling at about 191 FPS, while the GeForce RTX 4090 could reach 449 FPS. In this scenario, the CPU limits the GPU potential by 57% (FPS gap: 258 FPS). Overall distribution: CPU limits 12/12 cells, GPU limits 0/12, balanced 0/12.
Your Xeon E5-2643 v3 is the limiting side in the heaviest mismatch. This means part of the GeForce RTX 4090 rendering potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU Limits GPU 51% | CPU Limits GPU 57% | CPU Limits GPU 56% | CPU Limits GPU 56% |
| 1440p (2K QHD) | CPU Limits GPU 43% | CPU Limits GPU 53% | CPU Limits GPU 54% | CPU Limits GPU 53% |
| 4K (Ultra HD) | CPU Limits GPU 51% | CPU Limits GPU 52% | CPU Limits GPU 52% | CPU Limits GPU 53% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU62% - 78% <> GPU57% - 80% <> | CPU62% - 78% <> GPU57% - 80% <> | CPU31% - 50% <> GPU78% - 95% <> | CPU48% - 62% <> GPU71% - 88% <> |
| 1440p (2K QHD) | CPU62% - 75% <> GPU69% - 83% <> | CPU62% - 75% <> GPU69% - 83% <> | CPU28% - 47% <> GPU94% - 99% <> | CPU46% - 59% <> GPU87% - 91% <> |
| 4K (Ultra HD) | CPU61% - 66% <> GPU61% - 83% <> | CPU61% - 66% <> GPU61% - 83% <> | CPU26% - 37% <> GPU84% - 99% <> | CPU37% - 45% <> GPU77% - 91% <> |
The Xeon E5-2643 v3 + GeForce RTX 4090 pairing runs this title with CPU utilization between 26% and 78% and GPU utilization between 57% and 99%. Xeon E5-2643 v3 stays in a controlled operating range, while GeForce RTX 4090 carries most of the graphics load at heavier visual settings. As resolution scales, average GPU load rises from 76% at 1080p to 80% at 4K, while CPU averages move from 59% to 50%.
From a utilization perspective, this is a GPU-heavy load profile. At 1440p (2K QHD) High, the GeForce RTX 4090 averages 96% usage (94-99%), while the Xeon E5-2643 v3 stays at 38% (28-47%). This shows the graphics pipeline is carrying most of the workload, but utilization alone does not define the FPS limiter.
At 1080p, averages sit around CPU 59% and GPU 76%. At 1440p, that shifts to CPU 57% and GPU 84%, and at 4K it reaches CPU 50% and GPU 80%. This shows that workload scaling is present on both components, with stronger pressure on the GPU.
1440p (2K QHD) Ultra is the most balanced preset based on this dataset. It runs around CPU 52% (46-59%) and GPU 89% (87-91%), which keeps GeForce RTX 4090 well utilized without constant max-out behavior while Xeon E5-2643 v3 remains stable for consistent frame delivery.
Current utilization does not show an urgent upgrade requirement for either component; the Xeon E5-2643 v3 and GeForce RTX 4090 remain reasonably matched for this title.
Understanding Hardware Utilization: These percentages represent how much of your component's maximum processing power is actively being used during gameplay. They describe hardware load, but they do not directly tell you which component sets the FPS ceiling.
Important: a CPU or GPU can still be the FPS limiter without reaching 100% utilization. Two processors can both show 40% usage and still deliver very different frame rates, depending on per-core speed, cache, engine threading, driver overhead, and frame preparation efficiency.
Data generated by our Machine Learning engine trained on real-world benchmarks. Shows the approximate average utilization at each setting.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 22% below recommended and your GPU is 279% below recommended, but both meet minimum specs. Playable at Low/Medium settings, 1080p or below.
-22%vsrecommended
+279%vsrecommended
+109%vsminimum
+877%vsminimum
Yes, the Xeon E5-2643 v3 paired with the GeForce RTX 4090 can run Naraka: Bladepoint smoothly up to 1440p achieving around 95 FPS at Ultra quality. Your GPU is 279% above the recommended specs, and your CPU is 22% below the recommended requirements.
This CPU + GPU combo costs approximately $1694 ($45 CPU + $1649 GPU (Rank #77 Value)). Since the CPU is the main limiting factor, investing in a stronger processor will improve your framerates and overall value. For example, the Xeon Platinum 8454H is a great upgrade option for around $6540 (Rank #1 for value).
For Naraka: Bladepoint, upgrading the CPU would have the biggest impact on performance. The Xeon E5-2643 v3 is currently the limiting factor — the GeForce RTX 4090 has extra headroom that a faster processor could take advantage of. This is especially noticeable at 1080p where CPU performance matters more. CPU-limited at: 1080p low, 1080p medium, 1080p high, 1080p ultra, 1440p low, 1440p medium, 1440p high, 1440p ultra, 4k low, 4k medium, 4k high, 4k ultra.
Naraka: Bladepoint does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Naraka: Bladepoint requires at minimum a Core i5-4460 (CPU) and GeForce GTX 750 Ti (GPU) with 8 GB RAM and 20 GB storage. For the recommended experience, you need a Core i7-7700 and GeForce GTX 1060 with 16 GB RAM. Your setup meets the minimum requirements but falls short of the recommended specs. You may need to lower some settings for smooth performance.
These Naraka: Bladepoint FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
