Starfield FPS on Xeon E5-2643 v4 + GeForce RTX 4090

Starfield FPS Performance Results

Starfield

Bethesda's Creation Engine 2 is CPU-dependent, especially in cities, and requires an SSD for asset streaming. Optimization tends to favor AMD slightly, but generally requires powerful hardware to run smoothly.

Starfield FPS Estimates by Resolution on Xeon E5-2643 v4 + GeForce RTX 4090

Actual FPS may vary based on RAM speed, background processes, and other system factors

1080P
low119 FPS
medium104 FPS
high90 FPS
ultra67 FPS
1440P
low110 FPS
medium93 FPS
high80 FPS
ultra59 FPS
4K
low64 FPS
medium54 FPS
high43 FPS
ultra33 FPS

Performance Report

Starfield Performance Report onXeon E5-2643 v4 + GeForce RTX 4090

🎮Visual Experience

At 1080p, all quality settings exceed 67 FPS. At 1440p, frame rates range from 59 to 110 FPS. At 4K, frame rates range from 33 to 64 FPS.

Official Requirements

The GeForce RTX 4090 is 52% above the recommended GPU (GeForce RTX 2080) for Starfield. The Xeon E5-2643 v4 is 21% below minimum CPU requirement.

FPS Ceiling Analysis

No major FPS-ceiling mismatch detected. The GeForce RTX 4090 and Xeon E5-2643 v4 stay close in effective frame-generation ceiling across the tested resolutions and quality settings.

💰Value Analysis

Approximated average price on current market:

GeForce RTX 4090:$1649
Official Launch Price: $1599
Xeon E5-2643 v4:$555
Official Launch Price: $1552

Combo price: $2204. At 1080p Ultra, this combo delivers 67 FPS, equivalent to 0.03 FPS per dollar.

ResolutionLowMediumHighUltra
1080p0.054 fps/$0.047 fps/$0.041 fps/$0.030 fps/$
1440p0.050 fps/$0.042 fps/$0.036 fps/$0.027 fps/$
4k0.029 fps/$0.025 fps/$0.020 fps/$0.015 fps/$

* Table values represent FPS per Dollar (higher is better)

Affiliate Disclosure

ChipVERSUS is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. We may earn a commission on qualifying purchases made through our links. This comes at no additional cost to you and helps support our work in providing comprehensive PC building guides and tools.

Amazon and the Amazon logo are trademarks of Amazon.com, Inc. or its affiliates.

Starfield Combo AnalysisXeon E5-2643 v4 + GeForce RTX 4090

📈Analysis

Which Component Limits FPS Most?

This chart answers a simple question: which upgrade is more likely to increase FPS first? In this case, there is no clear winner.

The largest gap still appears at 1080p High, where the GeForce RTX 4090 reaches about 111 FPS, while the Xeon E5-2643 v4 still has headroom up to roughly 125 FPS.

That means neither part is consistently hitting its ceiling far ahead of the other. Across all tested settings, this pairing is GPU-limited in 7 out of 12 cases, CPU-limited in 0, and balanced in 5.

Overall, this is a balanced combination in this game.

Verdict

Upgrade Recommendations

Balanced

Neither the Xeon E5-2643 v4 nor the GeForce RTX 4090 stands out as the consistent limiter in this game, so the better upgrade depends more on your target settings than on one obvious bottleneck.

🧩
Detailed BreakdownShows which upgrade is more likely to unlock more FPS in each tested setting

This chart shows which upgrade is more likely to unlock more FPS in each tested setting. The lower line represents the part that reaches its limit first. When the CPU and GPU lines stay close together, the system is more balanced. When the gap widens, one component is more clearly holding the other back. Hover any setting to inspect it.

CPU vs GPU FPS Ceiling by Resolution and PresetStarfield on Xeon E5-2643 v4 + GeForce RTX 4090

Xeon E5-2643 v4GeForce RTX 4090
FPS16012080400lowmediumhighultra3%8%11%5%1080Plowmediumhighultra1%3%5%9%1440Plowmediumhighultra15%11%14%30%4K

The lower line is the current limiter. The closer the two lines are, the more balanced the CPU and GPU are for this game.

🧠Methodology

Each line represents an estimated FPS ceiling for one component, rather than live usage alone.

To estimate the CPU ceiling, we pair the Xeon E5-2643 v4 with GeForce RTX 5090, our current GPU anchor. To estimate the GPU ceiling, we pair the GeForce RTX 4090 with Ryzen 9 9950X3D, our current CPU anchor.

The lower line indicates the current limiter, since that component reaches its FPS ceiling first. In most scenarios, that is also the part most likely to deliver the bigger performance uplift if upgraded first.

The percentage shown represents the gap between the two ceilings. In practical terms, it shows how much of the stronger component's potential is left unused because the weaker one becomes the bottleneck first.

Starfield Requirements ComparisonXeon E5-2643 v4 + GeForce RTX 4090

See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.

CPU - Xeon E5-2643 v4
cpu icon
11,024
Your Score
MinimumCore i7-6800K
RecommendedCore i5-10600K
GPU - GeForce RTX 4090
gpu icon
38,112
Your Score
MinimumGeForce GTX 1070 Ti
RecommendedGeForce RTX 2080

Your hardware is below minimum requirements. CPU is the limiting factor (21% below minimum). Expect performance issues. Low settings recommended.

CPU

-39%vsrecommended

GPU

+52%vsrecommended

CPU

-21%vsminimum

GPU

+160%vsminimum

Minimum Requirements
Processor: Core i7-6800K
Memory: 16 GB
Disk Space: 125 GB (SSD Obrigatório)
System: Windows 10
Recommended Requirements
Video Card: GeForce RTX 2080
Processor: Core i5-10600K
Memory: 16 GB
Disk Space: 125 GB (SSD Obrigatório)
System: Windows 10

Starfield FAQ

1Can the Xeon E5-2643 v4 and GeForce RTX 4090 run Starfield well?

Yes, the Xeon E5-2643 v4 paired with the GeForce RTX 4090 can run Starfield smoothly up to 1080p achieving around 67 FPS at Ultra quality. Your GPU is 52% above the recommended specs, and your CPU is 39% below the recommended requirements.

2Is there a more cost-effective setup to run Starfield?

This CPU + GPU combo costs approximately $2,204 ($555 CPU + $1,649 GPU). This is a well-balanced setup, meaning you're getting good value from both components without significant waste.

3Which component should I upgrade first to improve Starfield performance?

This setup is already well-balanced for Starfield. In the Performance Limiter Analysis, neither side consistently defines the maximum FPS across the tested presets. Across all tested settings, the distribution is 7/12 GPU-limited, 0/12 CPU-limited, and 5/12 balanced. In practice, this pairing behaves as a well-balanced combination in this game. Because of that, upgrading only one component would usually bring smaller gains than improving the overall pairing.

4Does this setup support Frame Generation for Starfield?

Starfield does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.

5What are the minimum and recommended specs for Starfield?

Starfield requires at minimum a Core i7-6800K (CPU) and GeForce GTX 1070 Ti (GPU) with 16 GB RAM and 125 GB (SSD Obrigatório) storage. For the recommended experience, you need a Core i5-10600K and GeForce RTX 2080 with 16 GB RAM. Your hardware falls below the minimum requirements for this game, which may result in poor performance.

6How accurate are these Starfield FPS estimates for the Xeon E5-2643 v4 and GeForce RTX 4090?

These Starfield FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.

Performance estimates are based on synthetic benchmarks and hardware capabilities.

Results may vary based on drivers, OS, and background processes.