This 'Pokémon with guns' survival game runs on Unreal Engine. It is CPU-heavy due to AI simulation for the many creatures. Memory leaks can occur in long sessions, making 16GB of RAM a practical minimum.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, all quality settings exceed 190 FPS, suitable for 144Hz+ monitors. At 1440p, all settings exceed 175 FPS. At 4K, all settings exceed 114 FPS.
The GeForce RTX 5090 is 140% above the recommended GPU (GeForce RTX 2070) for Palworld. The Xeon E5-2650L v2 is 2% below minimum CPU requirement.
At lower resolutions (all 1080p settings, 1440p (low/medium)), the Xeon E5-2650L v2 sets the FPS ceiling. As graphical load increases at (1440p ultra), the GeForce RTX 5090 becomes the FPS-limiting side. The FPS ceiling is closely matched at 1440p high, all 4k settings.
Approximated average price on current market:
Combo price: $3778. At 1080p Ultra, this combo delivers 190 FPS, equivalent to 0.05 FPS per dollar.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p | 0.050 fps/$ | 0.050 fps/$ | 0.050 fps/$ | 0.050 fps/$ |
| 1440p | 0.050 fps/$ | 0.050 fps/$ | 0.050 fps/$ | 0.046 fps/$ |
| 4k | 0.046 fps/$ | 0.043 fps/$ | 0.034 fps/$ | 0.030 fps/$ |
* Table values represent FPS per Dollar (higher is better)
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages. Adjacent heavier settings are lightly stabilized to remove prediction jitter that would otherwise create impossible reversals.
At 1080p low, the Xeon E5-2650L v2 sets the ceiling at about 190 FPS, while the GeForce RTX 5090 could reach 308 FPS. In this scenario, the CPU limits the GPU potential by 38% (FPS gap: 118 FPS). Overall distribution: CPU limits 6/12 cells, GPU limits 2/12, balanced 4/12.
Your Xeon E5-2650L v2 is the limiting side in the heaviest mismatch. This means part of the GeForce RTX 5090 rendering potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU Limits GPU 38% | CPU Limits GPU 31% | CPU Limits GPU 18% | CPU Limits GPU 10% |
| 1440p (2K QHD) | CPU Limits GPU 21% | CPU Limits GPU 11% | Balanced | GPU Limits CPU 7% |
| 4K (Ultra HD) | Balanced | Balanced | Balanced | GPU Limits CPU 7% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings and then monotonic-smoothed across heavier presets and resolutions, not generic utilization heuristics.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your hardware is below minimum requirements. CPU is the limiting factor (2% below minimum). Expect performance issues. Low settings recommended.
-66%vsrecommended
+140%vsrecommended
-2%vsminimum
+672%vsminimum
Yes, the Xeon E5-2650L v2 paired with the GeForce RTX 5090 can run Palworld smoothly up to 4k achieving around 114 FPS at Ultra quality. Your GPU is 140% above the recommended specs, and your CPU is 66% below the recommended requirements.
This CPU + GPU combo costs approximately $3778 ($1078 CPU + $2700 GPU). Since the CPU is the main limiting factor, investing in a stronger processor will improve your framerates and overall value. For example, the EPYC 9375F is a great upgrade option for around $5306 (Rank #5 for value).
For Palworld, upgrading the CPU would have the biggest impact on performance. The Xeon E5-2650L v2 is currently the limiting factor — the GeForce RTX 5090 has extra headroom that a faster processor could take advantage of. This is especially noticeable at 1080p where CPU performance matters more. CPU-limited at: 1080p low, 1080p medium, 1080p high, 1080p ultra, 1440p low, 1440p medium. GPU fully utilized at: 1440p ultra.
Palworld does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Palworld requires at minimum a Core i5-3570K (CPU) and GeForce GTX 1050 (GPU) with 16 GB RAM and 40 GB (SSD) storage. For the recommended experience, you need a Core i9-9900K and GeForce RTX 2070 with 32 GB RAM. Your hardware falls below the minimum requirements for this game, which may result in poor performance.
These Palworld FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
