This 'Pokémon with guns' survival game runs on Unreal Engine. It is CPU-heavy due to AI simulation for the many creatures. Memory leaks can occur in long sessions, making 16GB of RAM a practical minimum.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, all quality settings exceed 182 FPS, suitable for 144Hz+ monitors. At 1440p, all settings exceed 176 FPS. At 4K, all settings exceed 100 FPS.
The GeForce RTX 4090 is 136% above the recommended GPU (GeForce RTX 2070) for Palworld. The Xeon E5-2667 v2 is 46% below recommended, but 58% above minimum.
At lower resolutions (1080p (medium/ultra)), the Xeon E5-2667 v2 determines the performance ceiling. As graphical load increases at (all 1440p settings, 4k (low/medium/high)), the GeForce RTX 4090 takes over as the primary performance factor. The system is well balanced at 1080p (low/high), 4k ultra.
Approximated average price on current market:
Combo price: $1949. At 1080p Ultra, this combo delivers 182 FPS, equivalent to 0.09 FPS per dollar.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p | 0.147 fps/$ | 0.127 fps/$ | 0.106 fps/$ | 0.093 fps/$ |
| 1440p | 0.131 fps/$ | 0.115 fps/$ | 0.102 fps/$ | 0.090 fps/$ |
| 4k | 0.089 fps/$ | 0.078 fps/$ | 0.069 fps/$ | 0.051 fps/$ |
* Table values represent FPS per Dollar (higher is better)
At 1440p low, the GeForce RTX 4090 sets the ceiling at about 208 FPS, while the Xeon E5-2667 v2 has headroom up to 257 FPS. In this scenario, the GPU limits the CPU potential by 19% (FPS gap: 49 FPS). Overall distribution: GPU limits 8/12 cells, CPU limits 2/12, balanced 2/12.
Your GeForce RTX 4090 is the limiting side in the heaviest mismatch. This means part of the Xeon E5-2667 v2 frame-generation potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | Balanced | CPU Limits GPU 7% | Balanced | CPU Limits GPU 7% |
| 1440p (2K QHD) | GPU Limits CPU 19% | GPU Limits CPU 10% | GPU Limits CPU 15% | GPU Limits CPU 12% |
| 4K (Ultra HD) | GPU Limits CPU 18% | GPU Limits CPU 8% | GPU Limits CPU 12% | GPU Limits CPU 8% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 46% below recommended and your GPU is 136% below recommended, but both meet minimum specs. Playable at Low/Medium settings, 1080p or below.
-46%vsrecommended
+136%vsrecommended
+58%vsminimum
+657%vsminimum
Yes, the Xeon E5-2667 v2 paired with the GeForce RTX 4090 can run Palworld smoothly up to 4k achieving around 100 FPS at Ultra quality. Your GPU is 136% above the recommended specs, and your CPU is 46% below the recommended requirements.
This CPU + GPU combo costs approximately $1949 ($300 CPU + $1649 GPU (Rank #77 Value)). Your GeForce RTX 4090 provides phenomenal top-tier performance but at a premium enthusiast price. Since you are essentially at the ceiling of current hardware capabilities, there are no meaningful performance upgrades available. However, if you wanted a more cost-effective build that still delivers a great experience, you could theoretically step down to a high-end card with a significantly better value rating.
Your GeForce RTX 4090 is already a top-tier graphics card. While it's technically the limiting factor here (which means you are fully utilizing your GPU's visual horsepower exactly as intended), there is no meaningful upgrade path that would drastically improve your Palworld performance right now. GPU fully utilized at: 1440p low, 1440p medium, 1440p high, 1440p ultra, 4k low, 4k medium, 4k high. CPU-limited at: 1080p medium, 1080p ultra.
Palworld does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Palworld requires at minimum a Core i5-3570K (CPU) and GeForce GTX 1050 (GPU) with 16 GB RAM and 40 GB (SSD) storage. For the recommended experience, you need a Core i9-9900K and GeForce RTX 2070 with 32 GB RAM. Your setup meets the minimum requirements but falls short of the recommended specs. You may need to lower some settings for smooth performance.
These Palworld FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
