Baldur's Gate 3
A dense RPG where Act 3 becomes a CPU stress test due to the high number of NPCs. An SSD is vital for loading times. 16GB of RAM is recommended, and the game benefits greatly from upscaling tech like DLSS and FSR.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, all quality settings exceed 142 FPS. At 1440p, all settings exceed 94 FPS. At 4K, all settings exceed 78 FPS.
The GeForce RTX 5090 is 136% above the recommended GPU (GeForce RTX 2060 Super) for Baldur's Gate 3. The Xeon E5-2697A v4 is 22% above the recommended CPU (Core i7-8700K).
No major FPS-ceiling mismatch detected. The GeForce RTX 5090 and Xeon E5-2697A v4 stay close in effective frame-generation ceiling across the tested resolutions and quality settings.
Approximated average price on current market:
Combo price: $2821. At 1080p Ultra, this combo delivers 142 FPS, equivalent to 0.05 FPS per dollar.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p | 0.090 fps/$ | 0.081 fps/$ | 0.064 fps/$ | 0.050 fps/$ |
| 1440p | 0.055 fps/$ | 0.050 fps/$ | 0.045 fps/$ | 0.033 fps/$ |
| 4k | 0.038 fps/$ | 0.035 fps/$ | 0.034 fps/$ | 0.028 fps/$ |
* Table values represent FPS per Dollar (higher is better)
Affiliate Disclosure
ChipVERSUS is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. We may earn a commission on qualifying purchases made through our links. This comes at no additional cost to you and helps support our work in providing comprehensive PC building guides and tools.
Amazon and the Amazon logo are trademarks of Amazon.com, Inc. or its affiliates.
This chart answers a simple question: which upgrade is more likely to increase FPS first? In this case, there is no clear winner.
The largest gap still appears at 1080p Low, where the Xeon E5-2697A v4 reaches about 254 FPS, while the GeForce RTX 5090 still has headroom up to roughly 286 FPS.
That means neither part is consistently hitting its ceiling far ahead of the other. Across all tested settings, this pairing is GPU-limited in 0 out of 12 cases, CPU-limited in 4, and balanced in 8.
Overall, this is a balanced combination in this game.
Neither the Xeon E5-2697A v4 nor the GeForce RTX 5090 stands out as the consistent limiter in this game, so the better upgrade depends more on your target settings than on one obvious bottleneck.
This chart shows which upgrade is more likely to unlock more FPS in each tested setting. The lower line represents the part that reaches its limit first. When the CPU and GPU lines stay close together, the system is more balanced. When the gap widens, one component is more clearly holding the other back. Hover any setting to inspect it.
The lower line is the current limiter. The closer the two lines are, the more balanced the CPU and GPU are for this game.
Each line represents an estimated FPS ceiling for one component, rather than live usage alone.
To estimate the CPU ceiling, we pair the Xeon E5-2697A v4 with GeForce RTX 5090, our current GPU anchor. To estimate the GPU ceiling, we pair the GeForce RTX 5090 with Ryzen 9 9950X3D, our current CPU anchor.
The lower line indicates the current limiter, since that component reaches its FPS ceiling first. In most scenarios, that is also the part most likely to deliver the bigger performance uplift if upgraded first.
The percentage shown represents the gap between the two ceilings. In practical terms, it shows how much of the stronger component's potential is left unused because the weaker one becomes the bottleneck first.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 22% above and your GPU is 136% above the recommended specs. High/Ultra at 1080p. Lower settings for higher resolutions.
+22%vsrecommended
+136%vsrecommended
+264%vsminimum
+303%vsminimum
Yes, the Xeon E5-2697A v4 paired with the GeForce RTX 5090 can run Baldur's Gate 3 smoothly up to 4k achieving around 78 FPS at Ultra quality. Your GPU is 136% above the recommended specs, and your CPU is 22% above the recommended requirements.
This CPU + GPU combo costs approximately $2,821 ($121 CPU + $2,700 GPU). This is a well-balanced setup, meaning you're getting good value from both components without significant waste.
This setup is already well-balanced for Baldur's Gate 3. In the Performance Limiter Analysis, neither side consistently defines the maximum FPS across the tested presets. Across all tested settings, the distribution is 0/12 GPU-limited, 4/12 CPU-limited, and 8/12 balanced. In practice, this pairing behaves as a well-balanced combination in this game. Because of that, upgrading only one component would usually bring smaller gains than improving the overall pairing.
Baldur's Gate 3 does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Baldur's Gate 3 requires at minimum a Core i5-4690 (CPU) and GeForce GTX 970 (GPU) with 8 GB RAM and 150 GB (SSD) storage. For the recommended experience, you need a Core i7-8700K and GeForce RTX 2060 Super with 16 GB RAM. Your Xeon E5-2697A v4 and GeForce RTX 5090 both exceed the recommended specs, so you're well-positioned for a great experience.
These Baldur's Gate 3 FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
