Civilization VI
The standard for turn-time benchmarks. Late-game turns require huge CPU throughput to process AI moves. High-resolution textures also demand a fair amount of VRAM.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, all quality settings exceed 91 FPS. At 1440p, frame rates range from 34 to 72 FPS. At 4K, frame rates range from 20 to 42 FPS.
The GeForce RTX 5090 is 552% above the recommended GPU (GeForce GTX 770) for Civilization VI. The Xeon E5-4640 v4 is 280% above the recommended CPU (Core i5-4xxx).
The Xeon E5-4640 v4 sets the FPS ceiling at all 1080p settings, all 1440p settings, all 4k settings, while the GeForce RTX 5090 still has headroom.
This chart answers a simple question: which upgrade is more likely to increase FPS first? In this case, the answer is clearly the CPU.
The largest gap appears at 1080p Low, where the Xeon E5-4640 v4 reaches about 159 FPS, while the GeForce RTX 5090 still has headroom up to roughly 394 FPS.
That means the Xeon E5-4640 v4 is hitting its performance ceiling first, leaving a 60% gap versus the GeForce RTX 5090's available headroom in the most unbalanced scenario. Across all tested settings, this pairing is CPU-limited in 12 out of 12 cases, with 0 GPU-limited and 0 balanced results.
Overall, this is a clearly CPU-bound combination in this game.
The Xeon E5-4640 v4 is consistently the limiting part in this game, so upgrading the CPU is more likely to deliver a larger FPS gain than upgrading the GPU.
This chart shows which upgrade is more likely to unlock more FPS in each tested setting. The lower line represents the part that reaches its limit first. When the CPU and GPU lines stay close together, the system is more balanced. When the gap widens, one component is more clearly holding the other back. Hover any setting to inspect it.
The lower line is the current limiter. The closer the two lines are, the more balanced the CPU and GPU are for this game.
Each line represents an estimated FPS ceiling for one component, rather than live usage alone.
To estimate the CPU ceiling, we pair the Xeon E5-4640 v4 with GeForce RTX 5090, our current GPU anchor. To estimate the GPU ceiling, we pair the GeForce RTX 5090 with Ryzen 9 9950X3D, our current CPU anchor.
The lower line indicates the current limiter, since that component reaches its FPS ceiling first. In most scenarios, that is also the part most likely to deliver the bigger performance uplift if upgraded first.
The percentage shown represents the gap between the two ceilings. In practical terms, it shows how much of the stronger component's potential is left unused because the weaker one becomes the bottleneck first.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 280% above and your GPU is 552% above the recommended specs. Ultra settings at 1080p, or High at 1440p/4K.
+280%vsrecommended
+552%vsrecommended
+1040%vsminimum
+2807%vsminimum
Yes, the Xeon E5-4640 v4 paired with the GeForce RTX 5090 can run Civilization VI smoothly up to 1080p achieving around 91 FPS at Ultra quality. Your GPU is 552% above the recommended specs, and your CPU is 280% above the recommended requirements.
Price data is not currently available for this combination. In general, look for setups where the CPU and GPU are balanced - this ensures you're not overspending on one component that the other can't keep up with.
For Civilization VI, upgrading the CPU would usually improve performance first. In the Performance Limiter Analysis, the Xeon E5-4640 v4 is the side that most often caps the frame rate, while the GeForce RTX 5090 still has additional headroom in the tested presets. The main bottleneck appears on the CPU side. The largest gap shows up at 1080p Low, where the CPU reaches about 159 FPS while the GPU still has headroom up to roughly 394 FPS. Across all tested settings, the distribution is 0/12 GPU-limited, 12/12 CPU-limited, and 0/12 balanced.
Civilization VI does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Civilization VI requires at minimum a Core i3-2120 (CPU) and GeForce GTS 450 (GPU) with 4 GB RAM and 12 GB storage. For the recommended experience, you need a Core i5-4xxx and GeForce GTX 770 with 8 GB RAM. Your Xeon E5-4640 v4 and GeForce RTX 5090 both exceed the recommended specs, so you're well-positioned for a great experience.
These Civilization VI FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
