Cyberpunk 2077FPS onXeon E7-4890 v2&GeForce RTX 4090

Cyberpunk 2077

The benchmark for modern graphical fidelity. Update 2.0 and Phantom Liberty raised the requirements, making an SSD mandatory. The dense city and NPC AI require strong multi-thread CPU performance. Path Tracing ('Overdrive Mode') is a feature reserved for high-end RTX 40 series cards with Frame Generation.

Cyberpunk 2077 - FPS Estimates by Resolution

Actual FPS may vary based on RAM speed, background processes, and other system factors

1080P
low280 FPS
medium261 FPS
high208 FPS
ultra169 FPS
1440P
low202 FPS
medium175 FPS
high153 FPS
ultra121 FPS
4K
low126 FPS
medium112 FPS
high93 FPS
ultra78 FPS

Performance Report

Cyberpunk 2077

GeForce RTX 4090 + Xeon E7-4890 v2
🎮Visual Experience

At 1080p, all quality settings exceed 169 FPS, suitable for 144Hz+ monitors. At 1440p, all settings exceed 121 FPS. At 4K, all settings exceed 78 FPS.

Official Requirements

The GeForce RTX 4090 is 131% above the recommended GPU (GeForce RTX 2060 Super) for Cyberpunk 2077. The Xeon E7-4890 v2 is 10% below recommended, but 152% above minimum.

⚙️Bottleneck Analysis

The Xeon E7-4890 v2 determines the performance ceiling at all 1080p settings, all 1440p settings, all 4k settings, while the GPU has headroom.

Performance Limiter Analysis

Xeon E7-4890 v2|GeForce RTX 4090
📈Analysis

At 1440p ultra, the Xeon E7-4890 v2 sets the ceiling at about 116 FPS, while the GeForce RTX 4090 could reach 170 FPS. In this scenario, the CPU limits the GPU potential by 32% (FPS gap: 54 FPS). Overall distribution: CPU limits 12/12 cells, GPU limits 0/12, balanced 0/12.

Verdict

CPU Limits GPU

Your Xeon E7-4890 v2 is the limiting side in the heaviest mismatch. This means part of the GeForce RTX 4090 rendering potential remains unused in those settings.

🧩Detailed Breakdown
1080p (Full HD)
LowCPU Limits GPU 23%
MediumCPU Limits GPU 21%
HighCPU Limits GPU 23%
UltraCPU Limits GPU 27%
1440p (2K QHD)
LowCPU Limits GPU 28%
MediumCPU Limits GPU 28%
HighCPU Limits GPU 27%
UltraCPU Limits GPU 32%
4K (Ultra HD)
LowCPU Limits GPU 23%
MediumCPU Limits GPU 21%
HighCPU Limits GPU 17%
UltraCPU Limits GPU 22%
Percentages show how much potential FPS of the stronger component is lost because the other component has a lower FPS ceiling.
🧠Methodology

We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.

Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.

CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.

The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.

📊Predicted Hardware Utilization for Xeon E7-4890 v2 and GeForce RTX 4090

1080p (Full HD)

Low
CPU44% - 89%
<>
GPU44% - 65%
<>
Medium
CPU47% - 90%
<>
GPU48% - 67%
<>
High
CPU43% - 91%
<>
GPU53% - 71%
<>
Ultra
CPU40% - 90%
<>
GPU67% - 74%
<>

1440p (2K QHD)

Low
CPU52% - 88%
<>
GPU70% - 84%
<>
Medium
CPU53% - 88%
<>
GPU74% - 86%
<>
High
CPU48% - 89%
<>
GPU77% - 90%
<>
Ultra
CPU51% - 88%
<>
GPU89% - 93%
<>

4K (Ultra HD)

Low
CPU35% - 67%
<>
GPU74% - 96%
<>
Medium
CPU37% - 62%
<>
GPU81% - 97%
<>
High
CPU28% - 57%
<>
GPU88% - 99%
<>
Ultra
CPU25% - 47%
<>
GPU93% - 100%
<>

Performance Summary

The Xeon E7-4890 v2 + GeForce RTX 4090 pairing runs this title with CPU utilization between 25% and 91% and GPU utilization between 44% and 100%. Xeon E7-4890 v2 stays in a controlled operating range, while GeForce RTX 4090 becomes the primary limiter at high visual load. As resolution scales, average GPU load rises from 61% at 1080p to 91% at 4K, while CPU averages move from 67% to 45%.

Bottleneck Analysis

This profile is GPU-bound. At 4K (Ultra HD) Ultra, the GeForce RTX 4090 averages 96% usage (93-100%), while the Xeon E7-4890 v2 stays at 36% (25-47%), indicating the graphics pipeline is the limiting stage.

Resolution Scaling

At 1080p, averages sit around CPU 67% and GPU 61%. At 1440p, that shifts to CPU 70% and GPU 83%, and at 4K it reaches CPU 45% and GPU 91%. This shows that workload scaling is present on both components, with stronger pressure on the GPU.

Optimal Settings Recommendation

4K (Ultra HD) Medium is the most balanced preset based on this dataset. It runs around CPU 50% (37-62%) and GPU 89% (81-97%), which keeps GeForce RTX 4090 well utilized without constant max-out behavior while Xeon E7-4890 v2 remains stable for consistent frame delivery.

Upgrade Insight

Current utilization does not show an urgent upgrade requirement for either component; the Xeon E7-4890 v2 and GeForce RTX 4090 remain reasonably matched for this title.

Understanding Hardware Utilization & Bottlenecks: These percentages represent how much of your component's maximum processing power is actively being used during gameplay. This is the key to identifying performance bottlenecks in any system.

  • The Ideal Scenario (GPU Bottleneck): You typically want to see High GPU Utilization (90%+) and moderate CPU usage. This indicates your system is successfully pushing out graphics as fast as it can, without being held back by the CPU.
  • CPU Bottleneck: If you see High CPU Utilization (85%+) paired with lower GPU utilization, the CPU is struggling to compute game logic and prepare frames fast enough. The GPU sits waiting, often resulting in stuttering, inconsistent frame times, and lower overall FPS.
  • Engine Limits or Capped FPS: If both CPU and GPU utilization are relatively low, it means the hardware is waiting on something else. This could be a game engine limitation, poorly optimized code, or an artificial framerate cap like VSync holding performance back.

Data generated by our Machine Learning engine trained on real-world benchmarks. Shows the approximate average utilization at each setting.

Cyberpunk 2077 Requirements Comparison

See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.

CPU - Xeon E7-4890 v2
cpu icon
30,946
Your Score
MinimumCore i7-6700
RecommendedCore i7-12700
GPU - GeForce RTX 4090
gpu icon
38,112
Your Score
MinimumGeForce GTX 1060
RecommendedGeForce RTX 2060 Super

Your CPU is 10% below recommended and your GPU is 131% below recommended, but both meet minimum specs. Playable at Low/Medium settings, 1080p or below.

CPU

-10%vsrecommended

GPU

+131%vsrecommended

CPU

+152%vsminimum

GPU

+279%vsminimum

Minimum Requirements
Video Card: GeForce GTX 1060
Processor: Core i7-6700
Memory: 12 GB
Disk Space: 70 GB (SSD)
System: Windows 10 64-bit
Recommended Requirements
Processor: Core i7-12700
Memory: 16 GB
Disk Space: 70 GB (NVMe SSD)
System: Windows 10 64-bit

Frequently Asked Questions

1Can the Xeon E7-4890 v2 and GeForce RTX 4090 run Cyberpunk 2077 well?

Yes, the Xeon E7-4890 v2 paired with the GeForce RTX 4090 can run Cyberpunk 2077 smoothly up to 4k achieving around 78 FPS at Ultra quality. Your GPU is 131% above the recommended specs, and your CPU is 10% below the recommended requirements.

2Is there a more cost-effective setup to run Cyberpunk 2077?

Price data is not currently available for this combination. In general, look for setups where the CPU and GPU are balanced — this ensures you're not overspending on one component that the other can't keep up with.

3Which component should I upgrade first to improve Cyberpunk 2077 performance?

For Cyberpunk 2077, upgrading the CPU would have the biggest impact on performance. The Xeon E7-4890 v2 is currently the limiting factor — the GeForce RTX 4090 has extra headroom that a faster processor could take advantage of. This is especially noticeable at 1080p where CPU performance matters more. CPU-limited at: 1080p low, 1080p medium, 1080p high, 1080p ultra, 1440p low, 1440p medium, 1440p high, 1440p ultra, 4k low, 4k medium, 4k high, 4k ultra.

4Does this setup support Frame Generation for Cyberpunk 2077?

Cyberpunk 2077 does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.

5What are the minimum and recommended specs for Cyberpunk 2077?

Cyberpunk 2077 requires at minimum a Core i7-6700 (CPU) and GeForce GTX 1060 (GPU) with 12 GB RAM and 70 GB (SSD) storage. For the recommended experience, you need a Core i7-12700 and GeForce RTX 2060 Super with 16 GB RAM. Your setup meets the minimum requirements but falls short of the recommended specs. You may need to lower some settings for smooth performance.

6How accurate are these Cyberpunk 2077 FPS estimates for the Xeon E7-4890 v2 and GeForce RTX 4090?

These Cyberpunk 2077 FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.

Performance estimates are based on synthetic benchmarks and hardware capabilities.

Results may vary based on drivers, OS, and background processes.