Throne and LibertyFPS onXeon E7-4890 v2&GeForce RTX 4090

Throne and Liberty

Built for massive sieges, this MMO creates a significant CPU bottleneck in large battles. 16GB of RAM is the minimum, setting a standard for next-gen MMOs.

Throne and Liberty - FPS Estimates by Resolution

Actual FPS may vary based on RAM speed, background processes, and other system factors

1080P
low229 FPS
medium201 FPS
high162 FPS
ultra120 FPS
1440P
low184 FPS
medium166 FPS
high137 FPS
ultra101 FPS
4K
low129 FPS
medium108 FPS
high85 FPS
ultra61 FPS

Performance Report

Throne and Liberty

GeForce RTX 4090 + Xeon E7-4890 v2
🎮Visual Experience

At 1080p, all quality settings exceed 120 FPS. At 1440p, all settings exceed 101 FPS. At 4K, all settings exceed 61 FPS.

Official Requirements

The GeForce RTX 4090 is 183% above the recommended GPU (GeForce GTX 1660) for Throne and Liberty. The Xeon E7-4890 v2 is 59% above the recommended CPU (Core i5-11600K).

⚙️Bottleneck Analysis

The Xeon E7-4890 v2 determines the performance ceiling at all 1080p settings, all 1440p settings, all 4k settings, while the GPU has headroom.

Performance Limiter Analysis

Xeon E7-4890 v2|GeForce RTX 4090
📈Analysis

At 4k ultra, the Xeon E7-4890 v2 sets the ceiling at about 61 FPS, while the GeForce RTX 4090 could reach 90 FPS. In this scenario, the CPU limits the GPU potential by 32% (FPS gap: 29 FPS). Overall distribution: CPU limits 12/12 cells, GPU limits 0/12, balanced 0/12.

Verdict

CPU Limits GPU

Your Xeon E7-4890 v2 is the limiting side in the heaviest mismatch. This means part of the GeForce RTX 4090 rendering potential remains unused in those settings.

🧩Detailed Breakdown
1080p (Full HD)
LowCPU Limits GPU 20%
MediumCPU Limits GPU 18%
HighCPU Limits GPU 14%
UltraCPU Limits GPU 26%
1440p (2K QHD)
LowCPU Limits GPU 19%
MediumCPU Limits GPU 17%
HighCPU Limits GPU 13%
UltraCPU Limits GPU 22%
4K (Ultra HD)
LowCPU Limits GPU 31%
MediumCPU Limits GPU 31%
HighCPU Limits GPU 23%
UltraCPU Limits GPU 32%
Percentages show how much potential FPS of the stronger component is lost because the other component has a lower FPS ceiling.
🧠Methodology

We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.

Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.

CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.

The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.

📊Predicted Hardware Utilization for Xeon E7-4890 v2 and GeForce RTX 4090

1080p (Full HD)

Low
CPU72% - 76%
<>
GPU47% - 76%
<>
Medium
CPU70% - 77%
<>
GPU66% - 78%
<>
High
CPU70% - 77%
<>
GPU66% - 78%
<>
Ultra
CPU47% - 59%
<>
GPU66% - 78%
<>

1440p (2K QHD)

Low
CPU62% - 64%
<>
GPU47% - 76%
<>
Medium
CPU49% - 66%
<>
GPU67% - 79%
<>
High
CPU49% - 66%
<>
GPU67% - 79%
<>
Ultra
CPU26% - 48%
<>
GPU67% - 79%
<>

4K (Ultra HD)

Low
CPU63% - 80%
<>
GPU47% - 76%
<>
Medium
CPU54% - 82%
<>
GPU68% - 82%
<>
High
CPU54% - 82%
<>
GPU68% - 82%
<>
Ultra
CPU33% - 74%
<>
GPU68% - 82%
<>

Performance Summary

The Xeon E7-4890 v2 + GeForce RTX 4090 pairing runs this title with CPU utilization between 26% and 82% and GPU utilization between 47% and 82%. Xeon E7-4890 v2 stays in a controlled operating range, while GeForce RTX 4090 is utilized efficiently without persistent saturation. As resolution scales, average GPU load rises from 70% at 1080p to 72% at 4K, while CPU averages move from 69% to 66%.

Bottleneck Analysis

The utilization pattern is relatively balanced. The GeForce RTX 4090 reaches 75% average at its highest-load preset, while the Xeon E7-4890 v2 peaks at 74% average, with no single component consistently acting as a hard bottleneck.

Resolution Scaling

At 1080p, averages sit around CPU 69% and GPU 70%. At 1440p, that shifts to CPU 54% and GPU 70%, and at 4K it reaches CPU 66% and GPU 72%. This shows that workload scaling is limited, which can indicate engine-side constraints.

Optimal Settings Recommendation

4K (Ultra HD) Medium is the most balanced preset based on this dataset. It runs around CPU 68% (54-82%) and GPU 75% (68-82%), which keeps GeForce RTX 4090 well utilized without constant max-out behavior while Xeon E7-4890 v2 remains stable for consistent frame delivery.

Upgrade Insight

Current utilization does not show an urgent upgrade requirement for either component; the Xeon E7-4890 v2 and GeForce RTX 4090 remain reasonably matched for this title.

Understanding Hardware Utilization & Bottlenecks: These percentages represent how much of your component's maximum processing power is actively being used during gameplay. This is the key to identifying performance bottlenecks in any system.

  • The Ideal Scenario (GPU Bottleneck): You typically want to see High GPU Utilization (90%+) and moderate CPU usage. This indicates your system is successfully pushing out graphics as fast as it can, without being held back by the CPU.
  • CPU Bottleneck: If you see High CPU Utilization (85%+) paired with lower GPU utilization, the CPU is struggling to compute game logic and prepare frames fast enough. The GPU sits waiting, often resulting in stuttering, inconsistent frame times, and lower overall FPS.
  • Engine Limits or Capped FPS: If both CPU and GPU utilization are relatively low, it means the hardware is waiting on something else. This could be a game engine limitation, poorly optimized code, or an artificial framerate cap like VSync holding performance back.

Data generated by our Machine Learning engine trained on real-world benchmarks. Shows the approximate average utilization at each setting.

Throne and Liberty Requirements Comparison

See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.

CPU - Xeon E7-4890 v2
cpu icon
30,946
Your Score
MinimumCore i5-7700
RecommendedCore i5-11600K
GPU - GeForce RTX 4090
gpu icon
38,112
Your Score
MinimumGeForce GTX 960
RecommendedGeForce GTX 1660

Your CPU is 59% above and your GPU is 183% above the recommended specs. Ultra settings at 1080p, or High at 1440p/4K.

CPU

+59%vsrecommended

GPU

+183%vsrecommended

CPU

+135%vsminimum

GPU

+521%vsminimum

Minimum Requirements
Video Card: GeForce GTX 960
Processor: Core i5-7700
Memory: 16 GB
Disk Space: 63 GB
System: Windows 10 64-bit
Recommended Requirements
Video Card: GeForce GTX 1660
Processor: Core i5-11600K
Memory: 16 GB
Disk Space: 63 GB (SSD)
System: Windows 10 64-bit

Frequently Asked Questions

1Can the Xeon E7-4890 v2 and GeForce RTX 4090 run Throne and Liberty well?

Yes, the Xeon E7-4890 v2 paired with the GeForce RTX 4090 can run Throne and Liberty smoothly up to 4k achieving around 61 FPS at Ultra quality. Your GPU is 183% above the recommended specs, and your CPU is 59% above the recommended requirements.

2Is there a more cost-effective setup to run Throne and Liberty?

Price data is not currently available for this combination. In general, look for setups where the CPU and GPU are balanced — this ensures you're not overspending on one component that the other can't keep up with.

3Which component should I upgrade first to improve Throne and Liberty performance?

For Throne and Liberty, upgrading the CPU would have the biggest impact on performance. The Xeon E7-4890 v2 is currently the limiting factor — the GeForce RTX 4090 has extra headroom that a faster processor could take advantage of. This is especially noticeable at 1080p where CPU performance matters more. CPU-limited at: 1080p low, 1080p medium, 1080p high, 1080p ultra, 1440p low, 1440p medium, 1440p high, 1440p ultra, 4k low, 4k medium, 4k high, 4k ultra.

4Does this setup support Frame Generation for Throne and Liberty?

Throne and Liberty does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.

5What are the minimum and recommended specs for Throne and Liberty?

Throne and Liberty requires at minimum a Core i5-7700 (CPU) and GeForce GTX 960 (GPU) with 16 GB RAM and 63 GB storage. For the recommended experience, you need a Core i5-11600K and GeForce GTX 1660 with 16 GB RAM. Your Xeon E7-4890 v2 and GeForce RTX 4090 both exceed the recommended specs, so you're well-positioned for a great experience.

6How accurate are these Throne and Liberty FPS estimates for the Xeon E7-4890 v2 and GeForce RTX 4090?

These Throne and Liberty FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.

Performance estimates are based on synthetic benchmarks and hardware capabilities.

Results may vary based on drivers, OS, and background processes.