Built on a modified Source engine, Apex Legends retains the scalability of Titanfall 2. Fast movement demands high frame rates for fluidity. VRAM can be a bottleneck if the 'Texture Streaming Budget' is set too high. While it handles 8GB of RAM better than some competitors, 16GB is recommended. It is generally less CPU-intensive than Warzone, allowing older quad-core CPUs to remain viable.
This game has a built-in FPS cap of 300 FPS
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, all quality settings exceed 243 FPS, suitable for 144Hz+ monitors. At 1440p, all settings exceed 261 FPS. At 4K, all settings exceed 149 FPS.
The GeForce RTX 4090 is 295% above the recommended GPU (GeForce GTX 970) for Apex Legends. The Xeon Gold 6130 is 137% above the recommended CPU (Core i5-3570K).
At lower resolutions (1080p (high/ultra)), the Xeon Gold 6130 sets the FPS ceiling. As graphical load increases at (all 1440p settings, all 4k settings), the GeForce RTX 4090 becomes the FPS-limiting side. The FPS ceiling is closely matched at 1080p (low/medium).
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.
At 4k medium, the GeForce RTX 4090 sets the ceiling at about 158 FPS, while the Xeon Gold 6130 has headroom up to 202 FPS. In this scenario, the GPU limits the CPU potential by 22% (FPS gap: 44 FPS). Overall distribution: GPU limits 8/12 cells, CPU limits 2/12, balanced 2/12.
Your GeForce RTX 4090 is the limiting side in the heaviest mismatch. This means part of the Xeon Gold 6130 frame-generation potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | Balanced | Balanced | CPU Limits GPU 14% | CPU Limits GPU 12% |
| 1440p (2K QHD) | GPU Limits CPU 17% | GPU Limits CPU 14% | GPU Limits CPU 13% | GPU Limits CPU 10% |
| 4K (Ultra HD) | GPU Limits CPU 21% | GPU Limits CPU 22% | GPU Limits CPU 22% | GPU Limits CPU 16% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU52% - 79% <> GPU61% - 86% <> | CPU51% - 78% <> GPU88% - 99% <> | CPU53% - 78% <> GPU88% - 98% <> | CPU35% - 69% <> GPU90% - 97% <> |
| 1440p (2K QHD) | CPU51% - 77% <> GPU62% - 86% <> | CPU50% - 76% <> GPU91% - 99% <> | CPU52% - 76% <> GPU91% - 98% <> | CPU35% - 70% <> GPU91% - 97% <> |
| 4K (Ultra HD) | CPU49% - 77% <> GPU62% - 86% <> | CPU48% - 76% <> GPU92% - 100% <> | CPU50% - 76% <> GPU92% - 99% <> | CPU33% - 70% <> GPU92% - 98% <> |
The Xeon Gold 6130 + GeForce RTX 4090 pairing runs this title with CPU utilization between 33% and 79% and GPU utilization between 61% and 100%. Xeon Gold 6130 stays in a controlled operating range, while GeForce RTX 4090 carries most of the graphics load at heavier visual settings. As resolution scales, average GPU load rises from 89% at 1080p to 90% at 4K, while CPU averages move from 62% to 60%.
The utilization pattern is relatively even. The GeForce RTX 4090 reaches 96% average at its highest-load preset, while the Xeon Gold 6130 peaks at 66% average. This suggests a fairly controlled load distribution, but the actual FPS-limiting side should still be read from the limiter analysis above.
At 1080p, averages sit around CPU 62% and GPU 89%. At 1440p, that shifts to CPU 61% and GPU 89%, and at 4K it reaches CPU 60% and GPU 90%. This shows that workload scaling is limited, which can indicate engine-side constraints.
1080p (Full HD) High is the most balanced preset based on this dataset. It runs around CPU 66% (53-78%) and GPU 93% (88-98%), which keeps GeForce RTX 4090 well utilized without constant max-out behavior while Xeon Gold 6130 remains stable for consistent frame delivery.
Upgrade priority should be the GPU. The GeForce RTX 4090 reaches 96% average load at 4K (Ultra HD) Medium while the Xeon Gold 6130 still has headroom, so a faster graphics card would deliver the largest uplift.
Understanding Hardware Utilization: These percentages represent how much of your component's maximum processing power is actively being used during gameplay. They describe hardware load, but they do not directly tell you which component sets the FPS ceiling.
Important: a CPU or GPU can still be the FPS limiter without reaching 100% utilization. Two processors can both show 40% usage and still deliver very different frame rates, depending on per-core speed, cache, engine threading, driver overhead, and frame preparation efficiency.
Data generated by our Machine Learning engine trained on real-world benchmarks. Shows the approximate average utilization at each setting.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 137% above and your GPU is 295% above the recommended specs. Ultra settings at 1080p, or High at 1440p/4K.
+137%vsrecommended
+295%vsrecommended
+396%vsminimum
+3160%vsminimum
Yes, the Xeon Gold 6130 paired with the GeForce RTX 4090 can run Apex Legends smoothly up to 4k achieving around 149 FPS at Ultra quality. Your GPU is 295% above the recommended specs, and your CPU is 137% above the recommended requirements.
Price data is not currently available for this combination. In general, look for setups where the CPU and GPU are balanced — this ensures you're not overspending on one component that the other can't keep up with.
Your GeForce RTX 4090 is already a top-tier graphics card. While it's technically the limiting factor here (which means you are fully utilizing your GPU's visual horsepower exactly as intended), there is no meaningful upgrade path that would drastically improve your Apex Legends performance right now. GPU fully utilized at: 1440p low, 1440p medium, 1440p high, 1440p ultra, 4k low, 4k medium, 4k high, 4k ultra. CPU-limited at: 1080p high, 1080p ultra.
Apex Legends does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Apex Legends requires at minimum a Core i3-6300 (CPU) and GeForce GT 640 (GPU) with 6 GB RAM and 56 GB storage. For the recommended experience, you need a Core i5-3570K and GeForce GTX 970 with 8 GB RAM. Your Xeon Gold 6130 and GeForce RTX 4090 both exceed the recommended specs, so you're well-positioned for a great experience.
These Apex Legends FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
