The Java version is inefficient and single-thread bound, often bottlenecking on the CPU unless you use performance mods. The Bedrock edition is optimized in C++ and runs much better. For Java, the CPU is king.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, all quality settings exceed 113 FPS. At 1440p, all settings exceed 101 FPS. At 4K, all settings exceed 69 FPS.
The GeForce RTX 4090 is 1907% above the recommended GPU (GeForce 700 Series) for Minecraft. The Xeon Gold 6154 is 392% above the recommended CPU (Core i5-4690).
At lower resolutions (1080p low, 1440p (low/ultra), all 4k settings), the Xeon Gold 6154 sets the FPS ceiling. As graphical load increases at (1080p (medium/high), 1440p high), the GeForce RTX 4090 becomes the FPS-limiting side. The FPS ceiling is closely matched at 1080p ultra, 1440p medium.
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.
At 4k ultra, the Xeon Gold 6154 sets the ceiling at about 56 FPS, while the GeForce RTX 4090 could reach 110 FPS. In this scenario, the CPU limits the GPU potential by 49% (FPS gap: 54 FPS). Overall distribution: CPU limits 7/12 cells, GPU limits 3/12, balanced 2/12.
Your Xeon Gold 6154 is the limiting side in the heaviest mismatch. This means part of the GeForce RTX 4090 rendering potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU Limits GPU 7% | GPU Limits CPU 9% | GPU Limits CPU 24% | Balanced |
| 1440p (2K QHD) | CPU Limits GPU 22% | Balanced | GPU Limits CPU 13% | CPU Limits GPU 10% |
| 4K (Ultra HD) | CPU Limits GPU 43% | CPU Limits GPU 40% | CPU Limits GPU 44% | CPU Limits GPU 49% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU21% - 38% <> GPU31% - 83% <> | CPU21% - 38% <> GPU31% - 83% <> | CPU28% - 41% <> GPU32% - 87% <> | CPU29% - 42% <> GPU91% - 100% <> |
| 1440p (2K QHD) | CPU21% - 38% <> GPU31% - 83% <> | CPU21% - 38% <> GPU31% - 83% <> | CPU28% - 41% <> GPU32% - 86% <> | CPU29% - 43% <> GPU90% - 100% <> |
| 4K (Ultra HD) | CPU19% - 38% <> GPU31% - 83% <> | CPU19% - 38% <> GPU31% - 83% <> | CPU26% - 41% <> GPU32% - 86% <> | CPU26% - 42% <> GPU90% - 100% <> |
The Xeon Gold 6154 + GeForce RTX 4090 pairing runs this title with CPU utilization between 19% and 43% and GPU utilization between 31% and 100%. Xeon Gold 6154 keeps significant headroom across presets, while GeForce RTX 4090 carries most of the graphics load at heavier visual settings. As resolution scales, average GPU load rises from 68% at 1080p to 67% at 4K, while CPU averages move from 33% to 31%.
From a utilization perspective, this is a GPU-heavy load profile. At 1080p (Full HD) Ultra, the GeForce RTX 4090 averages 96% usage (91-100%), while the Xeon Gold 6154 stays at 36% (29-42%). This shows the graphics pipeline is carrying most of the workload, but utilization alone does not define the FPS limiter.
At 1080p, averages sit around CPU 33% and GPU 68%. At 1440p, that shifts to CPU 33% and GPU 67%, and at 4K it reaches CPU 31% and GPU 67%. This shows that workload scaling is limited, which can indicate engine-side constraints.
1440p (2K QHD) Ultra is the most balanced preset based on this dataset. It runs around CPU 36% (29-43%) and GPU 95% (90-100%), which keeps GeForce RTX 4090 well utilized without constant max-out behavior while Xeon Gold 6154 remains stable for consistent frame delivery.
Upgrade priority should be the GPU. The GeForce RTX 4090 reaches 96% average load at 1080p (Full HD) Ultra while the Xeon Gold 6154 still has headroom, so a faster graphics card would deliver the largest uplift.
Understanding Hardware Utilization: These percentages represent how much of your component's maximum processing power is actively being used during gameplay. They describe hardware load, but they do not directly tell you which component sets the FPS ceiling.
Important: a CPU or GPU can still be the FPS limiter without reaching 100% utilization. Two processors can both show 40% usage and still deliver very different frame rates, depending on per-core speed, cache, engine threading, driver overhead, and frame preparation efficiency.
Data generated by our Machine Learning engine trained on real-world benchmarks. Shows the approximate average utilization at each setting.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 392% above and your GPU is 1907% above the recommended specs. Ultra settings at 1080p, or High at 1440p/4K.
+392%vsrecommended
+1907%vsrecommended
+754%vsminimum
+39600%vsminimum
Yes, the Xeon Gold 6154 paired with the GeForce RTX 4090 can run Minecraft smoothly up to 4k achieving around 69 FPS at Ultra quality. Your GPU is 1907% above the recommended specs, and your CPU is 392% above the recommended requirements.
Price data is not currently available for this combination. In general, look for setups where the CPU and GPU are balanced — this ensures you're not overspending on one component that the other can't keep up with.
For Minecraft, upgrading the CPU would have the biggest impact on performance. The Xeon Gold 6154 is currently the limiting factor — the GeForce RTX 4090 has extra headroom that a faster processor could take advantage of. This is especially noticeable at 1080p where CPU performance matters more. CPU-limited at: 1080p low, 1440p low, 1440p ultra, 4k low, 4k medium, 4k high, 4k ultra. GPU fully utilized at: 1080p medium, 1080p high, 1440p high.
Minecraft does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Minecraft requires at minimum a Core i3-3210 (CPU) and GeForce 400 Series (GPU) with 2 GB RAM and 1 GB storage. For the recommended experience, you need a Core i5-4690 and GeForce 700 Series with 4 GB RAM. Your Xeon Gold 6154 and GeForce RTX 4090 both exceed the recommended specs, so you're well-positioned for a great experience.
These Minecraft FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
