Bethesda's Creation Engine 2 is CPU-dependent, especially in cities, and requires an SSD for asset streaming. Optimization tends to favor AMD slightly, but generally requires powerful hardware to run smoothly.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, all quality settings exceed 68 FPS. At 1440p, all settings exceed 61 FPS. At 4K, frame rates range from 41 to 53 FPS.
The GeForce RTX 4090 is 52% above the recommended GPU (GeForce RTX 2080) for Starfield. The Xeon Gold 6230R is 80% above the recommended CPU (Core i5-10600K).
The Xeon Gold 6230R sets the FPS ceiling at all 1080p settings, 1440p (low/medium), all 4k settings, while the GeForce RTX 4090 still has headroom. The FPS ceiling is closely matched at 1440p (high/ultra).
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.
At 4k low, the Xeon Gold 6230R sets the ceiling at about 54 FPS, while the GeForce RTX 4090 could reach 89 FPS. In this scenario, the CPU limits the GPU potential by 39% (FPS gap: 35 FPS). Overall distribution: CPU limits 10/12 cells, GPU limits 0/12, balanced 2/12.
Your Xeon Gold 6230R is the limiting side in the heaviest mismatch. This means part of the GeForce RTX 4090 rendering potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU Limits GPU 17% | CPU Limits GPU 13% | CPU Limits GPU 10% | CPU Limits GPU 11% |
| 1440p (2K QHD) | CPU Limits GPU 17% | CPU Limits GPU 13% | Balanced | Balanced |
| 4K (Ultra HD) | CPU Limits GPU 39% | CPU Limits GPU 37% | CPU Limits GPU 30% | CPU Limits GPU 22% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU56% - 87% <> GPU52% - 72% <> | CPU56% - 72% <> GPU84% - 96% <> | CPU54% - 68% <> GPU87% - 96% <> | CPU53% - 69% <> GPU88% - 96% <> |
| 1440p (2K QHD) | CPU42% - 61% <> GPU75% - 87% <> | CPU40% - 61% <> GPU90% - 98% <> | CPU39% - 58% <> GPU92% - 100% <> | CPU34% - 58% <> GPU94% - 100% <> |
| 4K (Ultra HD) | CPU38% - 53% <> GPU75% - 88% <> | CPU38% - 53% <> GPU94% - 99% <> | CPU37% - 52% <> GPU97% - 100% <> | CPU37% - 51% <> GPU97% - 100% <> |
The Xeon Gold 6230R + GeForce RTX 4090 pairing runs this title with CPU utilization between 34% and 87% and GPU utilization between 52% and 100%. Xeon Gold 6230R stays in a controlled operating range, while GeForce RTX 4090 carries most of the graphics load at heavier visual settings. As resolution scales, average GPU load rises from 84% at 1080p to 94% at 4K, while CPU averages move from 65% to 45%.
From a utilization perspective, this is a GPU-heavy load profile. At 4K (Ultra HD) High, the GeForce RTX 4090 averages 98% usage (97-100%), while the Xeon Gold 6230R stays at 44% (37-52%). This shows the graphics pipeline is carrying most of the workload, but utilization alone does not define the FPS limiter.
At 1080p, averages sit around CPU 65% and GPU 84%. At 1440p, that shifts to CPU 49% and GPU 92%, and at 4K it reaches CPU 45% and GPU 94%. This shows that workload scaling is present on both components, with stronger pressure on the GPU.
1080p (Full HD) Medium is the most balanced preset based on this dataset. It runs around CPU 64% (56-72%) and GPU 90% (84-96%), which keeps GeForce RTX 4090 well utilized without constant max-out behavior while Xeon Gold 6230R remains stable for consistent frame delivery.
Current utilization does not show an urgent upgrade requirement for either component; the Xeon Gold 6230R and GeForce RTX 4090 remain reasonably matched for this title.
Understanding Hardware Utilization: These percentages represent how much of your component's maximum processing power is actively being used during gameplay. They describe hardware load, but they do not directly tell you which component sets the FPS ceiling.
Important: a CPU or GPU can still be the FPS limiter without reaching 100% utilization. Two processors can both show 40% usage and still deliver very different frame rates, depending on per-core speed, cache, engine threading, driver overhead, and frame preparation efficiency.
Data generated by our Machine Learning engine trained on real-world benchmarks. Shows the approximate average utilization at each setting.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 80% above and your GPU is 52% above the recommended specs. Ultra settings at 1080p, or High at 1440p/4K.
+80%vsrecommended
+52%vsrecommended
+135%vsminimum
+160%vsminimum
Yes, the Xeon Gold 6230R paired with the GeForce RTX 4090 can run Starfield smoothly up to 1440p achieving around 61 FPS at Ultra quality. Your GPU is 52% above the recommended specs, and your CPU is 80% above the recommended requirements.
Price data is not currently available for this combination. In general, look for setups where the CPU and GPU are balanced — this ensures you're not overspending on one component that the other can't keep up with.
For Starfield, upgrading the CPU would have the biggest impact on performance. The Xeon Gold 6230R is currently the limiting factor — the GeForce RTX 4090 has extra headroom that a faster processor could take advantage of. This is especially noticeable at 1080p where CPU performance matters more. CPU-limited at: 1080p low, 1080p medium, 1080p high, 1080p ultra, 1440p low, 1440p medium, 4k low, 4k medium, 4k high, 4k ultra.
Starfield does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Starfield requires at minimum a Core i7-6800K (CPU) and GeForce GTX 1070 Ti (GPU) with 16 GB RAM and 125 GB (SSD Obrigatório) storage. For the recommended experience, you need a Core i5-10600K and GeForce RTX 2080 with 16 GB RAM. Your Xeon Gold 6230R and GeForce RTX 4090 both exceed the recommended specs, so you're well-positioned for a great experience.
These Starfield FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
