Minecraft
The Java version is inefficient and single-thread bound, often bottlenecking on the CPU unless you use performance mods. The Bedrock edition is optimized in C++ and runs much better. For Java, the CPU is king.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, all quality settings exceed 229 FPS, suitable for 144Hz+ monitors. At 1440p, all settings exceed 188 FPS. At 4K, all settings exceed 134 FPS.
The GeForce RTX 4090 is 1907% above the recommended GPU (GeForce 700 Series) for Minecraft. The Xeon Platinum 8352M is 695% above the recommended CPU (Core i5-4690).
At lower resolutions (all 1080p settings, 1440p low), the Xeon Platinum 8352M sets the FPS ceiling. As graphical load increases at (4k (medium/high/ultra)), the GeForce RTX 4090 becomes the FPS-limiting side. The FPS ceiling is closely matched at 1440p (medium/high/ultra), 4k low.
Approximated average price on current market:
Combo price: $6120. At 1080p Ultra, this combo delivers 229 FPS, equivalent to 0.04 FPS per dollar.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p | 0.138 fps/$ | 0.095 fps/$ | 0.059 fps/$ | 0.037 fps/$ |
| 1440p | 0.101 fps/$ | 0.075 fps/$ | 0.046 fps/$ | 0.031 fps/$ |
| 4k | 0.072 fps/$ | 0.055 fps/$ | 0.034 fps/$ | 0.022 fps/$ |
* Table values represent FPS per Dollar (higher is better)
Affiliate Disclosure
ChipVERSUS is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. We may earn a commission on qualifying purchases made through our links. This comes at no additional cost to you and helps support our work in providing comprehensive PC building guides and tools.
Amazon and the Amazon logo are trademarks of Amazon.com, Inc. or its affiliates.
This chart answers a simple question: which upgrade is more likely to increase FPS first? In this case, the answer is more often the CPU.
The largest gap appears at 1080p Low, where the Xeon Platinum 8352M reaches about 883 FPS, while the GeForce RTX 4090 still has headroom up to roughly 1192 FPS.
That means the Xeon Platinum 8352M is hitting its performance ceiling first, leaving a 26% gap versus the GeForce RTX 4090's available headroom in the most unbalanced scenario. Across all tested settings, this pairing is CPU-limited in 5 out of 12 cases, with 3 GPU-limited and 4 balanced results.
Overall, this is a CPU-leaning combination in this game.
The Xeon Platinum 8352M is more often the limiting part in this game, so a CPU upgrade is somewhat more likely to deliver the bigger FPS gain than a GPU upgrade.
This chart shows which upgrade is more likely to unlock more FPS in each tested setting. The lower line represents the part that reaches its limit first. When the CPU and GPU lines stay close together, the system is more balanced. When the gap widens, one component is more clearly holding the other back. Hover any setting to inspect it.
The lower line is the current limiter. The closer the two lines are, the more balanced the CPU and GPU are for this game.
Each line represents an estimated FPS ceiling for one component, rather than live usage alone.
To estimate the CPU ceiling, we pair the Xeon Platinum 8352M with GeForce RTX 5090, our current GPU anchor. To estimate the GPU ceiling, we pair the GeForce RTX 4090 with Ryzen 9 9950X3D, our current CPU anchor.
The lower line indicates the current limiter, since that component reaches its FPS ceiling first. In most scenarios, that is also the part most likely to deliver the bigger performance uplift if upgraded first.
The percentage shown represents the gap between the two ceilings. In practical terms, it shows how much of the stronger component's potential is left unused because the weaker one becomes the bottleneck first.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 695% above and your GPU is 1907% above the recommended specs. Ultra settings at 1080p, or High at 1440p/4K.
+695%vsrecommended
+1907%vsrecommended
+1282%vsminimum
+39600%vsminimum
Yes, the Xeon Platinum 8352M paired with the GeForce RTX 4090 can run Minecraft smoothly up to 4k achieving around 134 FPS at Ultra quality. Your GPU is 1907% above the recommended specs, and your CPU is 695% above the recommended requirements.
This CPU + GPU combo costs approximately $6,120 ($4,471 CPU + $1,649 GPU). Since the CPU is the main limiting factor, investing in a stronger processor will improve your framerates and overall value. For example, the EPYC 9375F is a great upgrade option for around $5,306 (Rank #5 for value).
For Minecraft, upgrading the CPU would usually improve performance first. In the Performance Limiter Analysis, the Xeon Platinum 8352M is the side that most often caps the frame rate, while the GeForce RTX 4090 still has additional headroom in the tested presets. If you want to move closer to the current market ceiling, a stronger processor like Ryzen Threadripper PRO 9995WX for around $11,699 would be the clearest next step. The main bottleneck appears on the CPU side. The largest gap shows up at 1080p Low, where the CPU reaches about 883 FPS while the GPU still has headroom up to roughly 1192 FPS. Across all tested settings, the distribution is 3/12 GPU-limited, 5/12 CPU-limited, and 4/12 balanced.
Minecraft does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Minecraft requires at minimum a Core i3-3210 (CPU) and GeForce 400 Series (GPU) with 2 GB RAM and 1 GB storage. For the recommended experience, you need a Core i5-4690 and GeForce 700 Series with 4 GB RAM. Your Xeon Platinum 8352M and GeForce RTX 4090 both exceed the recommended specs, so you're well-positioned for a great experience.
These Minecraft FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
