A dense RPG where Act 3 becomes a CPU stress test due to the high number of NPCs. An SSD is vital for loading times. 16GB of RAM is recommended, and the game benefits greatly from upscaling tech like DLSS and FSR.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, all quality settings exceed 125 FPS. At 1440p, all settings exceed 98 FPS. At 4K, all settings exceed 67 FPS.
The GeForce RTX 4090 is 131% above the recommended GPU (GeForce RTX 2060 Super) for Baldur's Gate 3. The Xeon Silver 4116 is 16% below recommended, but 151% above minimum.
At lower resolutions (all 1080p settings), the Xeon Silver 4116 sets the FPS ceiling. As graphical load increases at (1440p (medium/high), all 4k settings), the GeForce RTX 4090 becomes the FPS-limiting side. The FPS ceiling is closely matched at 1440p (low/ultra).
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.
At 4k high, the GeForce RTX 4090 sets the ceiling at about 67 FPS, while the Xeon Silver 4116 has headroom up to 93 FPS. In this scenario, the GPU limits the CPU potential by 28% (FPS gap: 26 FPS). Overall distribution: GPU limits 6/12 cells, CPU limits 4/12, balanced 2/12.
Your GeForce RTX 4090 is the limiting side in the heaviest mismatch. This means part of the Xeon Silver 4116 frame-generation potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU Limits GPU 27% | CPU Limits GPU 18% | CPU Limits GPU 17% | CPU Limits GPU 25% |
| 1440p (2K QHD) | Balanced | GPU Limits CPU 18% | GPU Limits CPU 18% | Balanced |
| 4K (Ultra HD) | GPU Limits CPU 13% | GPU Limits CPU 26% | GPU Limits CPU 28% | GPU Limits CPU 12% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 16% below recommended and your GPU is 131% below recommended, but both meet minimum specs. Playable at Low/Medium settings, 1080p or below.
-16%vsrecommended
+131%vsrecommended
+151%vsminimum
+295%vsminimum
Yes, the Xeon Silver 4116 paired with the GeForce RTX 4090 can run Baldur's Gate 3 smoothly up to 4k achieving around 67 FPS at Ultra quality. Your GPU is 131% above the recommended specs, and your CPU is 16% below the recommended requirements.
Price data is not currently available for this combination. In general, look for setups where the CPU and GPU are balanced — this ensures you're not overspending on one component that the other can't keep up with.
Your GeForce RTX 4090 is already a top-tier graphics card. While it's technically the limiting factor here (which means you are fully utilizing your GPU's visual horsepower exactly as intended), there is no meaningful upgrade path that would drastically improve your Baldur's Gate 3 performance right now. GPU fully utilized at: 1440p medium, 1440p high, 4k low, 4k medium, 4k high, 4k ultra. CPU-limited at: 1080p low, 1080p medium, 1080p high, 1080p ultra.
Baldur's Gate 3 does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Baldur's Gate 3 requires at minimum a Core i5-4690 (CPU) and GeForce GTX 970 (GPU) with 8 GB RAM and 150 GB (SSD) storage. For the recommended experience, you need a Core i7-8700K and GeForce RTX 2060 Super with 16 GB RAM. Your setup meets the minimum requirements but falls short of the recommended specs. You may need to lower some settings for smooth performance.
These Baldur's Gate 3 FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
