Optimized for mobile roots, the PC version offers higher resolution textures and volumetric shadows while keeping minimum specs low. It is light on the CPU but requires a dedicated GPU for stable 1080p/60FPS gameplay.
This game has a built-in FPS cap of 60 FPS
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, all quality settings exceed 62 FPS. At 1440p, all settings exceed 61 FPS. At 4K, frame rates range from 52 to 58 FPS.
The GeForce RTX 4090 is 279% above the recommended GPU (GeForce GTX 1060) for Genshin Impact. The Xeon W-1350 is 46% below recommended, but 42% above minimum.
At lower resolutions (all 1080p settings), the Xeon W-1350 sets the FPS ceiling. As graphical load increases at (all 1440p settings, 4k (low/medium)), the GeForce RTX 4090 becomes the FPS-limiting side. The FPS ceiling is closely matched at 4k (high/ultra).
Approximated average price on current market:
Combo price: $1904. At 1080p Ultra, this combo delivers 62 FPS, equivalent to 0.03 FPS per dollar.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p | 0.034 fps/$ | 0.034 fps/$ | 0.034 fps/$ | 0.033 fps/$ |
| 1440p | 0.034 fps/$ | 0.033 fps/$ | 0.033 fps/$ | 0.032 fps/$ |
| 4k | 0.030 fps/$ | 0.030 fps/$ | 0.029 fps/$ | 0.027 fps/$ |
* Table values represent FPS per Dollar (higher is better)
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages. Adjacent heavier settings are lightly stabilized to remove prediction jitter that would otherwise create impossible reversals.
At 1080p low, the Xeon W-1350 sets the ceiling at about 97 FPS, while the GeForce RTX 4090 could reach 141 FPS. In this scenario, the CPU limits the GPU potential by 31% (FPS gap: 44 FPS). Overall distribution: CPU limits 4/12 cells, GPU limits 8/12, balanced 0/12.
Your Xeon W-1350 is the limiting side in the heaviest mismatch. This means part of the GeForce RTX 4090 rendering potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU Limits GPU 31% | CPU Limits GPU 31% | CPU Limits GPU 31% | CPU Limits GPU 31% |
| 1440p (2K QHD) | GPU Limits CPU 19% | GPU Limits CPU 19% | GPU Limits CPU 19% | GPU Limits CPU 19% |
| 4K (Ultra HD) | GPU Limits CPU 19% | GPU Limits CPU 19% | GPU Limits CPU 19% | GPU Limits CPU 19% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings and then monotonic-smoothed across heavier presets and resolutions, not generic utilization heuristics.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 46% below recommended and your GPU is 279% below recommended, but both meet minimum specs. Playable at Low/Medium settings, 1080p or below.
-46%vsrecommended
+279%vsrecommended
+42%vsminimum
+1218%vsminimum
Yes, the Xeon W-1350 paired with the GeForce RTX 4090 can run Genshin Impact smoothly up to 1440p achieving around 61 FPS at Ultra quality. Your GPU is 279% above the recommended specs, and your CPU is 46% below the recommended requirements.
This CPU + GPU combo costs approximately $1904 ($255 CPU + $1649 GPU). Your GeForce RTX 4090 provides phenomenal top-tier performance but at a premium enthusiast price. Since you are essentially at the ceiling of current hardware capabilities, there are no meaningful performance upgrades available. However, if you wanted a more cost-effective build that still delivers a great experience, you could theoretically step down to a high-end card with a significantly better value rating.
Your GeForce RTX 4090 is already a top-tier graphics card. While it's technically the limiting factor here (which means you are fully utilizing your GPU's visual horsepower exactly as intended), there is no meaningful upgrade path that would drastically improve your Genshin Impact performance right now. GPU fully utilized at: 1440p low, 1440p medium, 1440p high, 1440p ultra, 4k low, 4k medium. CPU-limited at: 1080p low, 1080p medium, 1080p high, 1080p ultra.
Genshin Impact does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Genshin Impact requires at minimum a Core i5 (CPU) and GeForce GT 1030 (GPU) with 8 GB RAM and 100 GB storage. For the recommended experience, you need a Core i7 and GeForce GTX 1060 with 16 GB RAM. Your setup meets the minimum requirements but falls short of the recommended specs. You may need to lower some settings for smooth performance.
These Genshin Impact FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
