Counter-Strike 2FPS onXeon W-1370&GeForce RTX 4090

Counter-Strike 2

The transition from Global Offensive to Counter-Strike 2 marked the end of the DX9 era for Valve. The new Source 2 engine introduces physically based rendering and dynamic smoke that interacts with lighting, significantly changing the performance profile. While CS:GO was light on the GPU, CS2 requires a competent card to handle these effects without stuttering. It remains CPU-heavy at competitive settings, where the 'sub-tick' server architecture demands strong single-thread performance. CPUs with large L3 caches, like AMD's X3D line, offer a major advantage. 8GB of RAM is now the absolute minimum, though more is recommended to avoid hitches.

Counter-Strike 2 - FPS Estimates by Resolution

Actual FPS may vary based on RAM speed, background processes, and other system factors

1080P
low447 FPS
medium385 FPS
high322 FPS
ultra307 FPS
1440P
low455 FPS
medium388 FPS
high335 FPS
ultra287 FPS
4K
low326 FPS
medium291 FPS
high260 FPS
ultra218 FPS

Performance Report

Counter-Strike 2

GeForce RTX 4090 + Xeon W-1370
🎮Visual Experience

At 1080p, all quality settings exceed 307 FPS, suitable for 144Hz+ monitors. At 1440p, all settings exceed 287 FPS. At 4K, all settings exceed 218 FPS.

Official Requirements

The GeForce RTX 4090 is 136% above the recommended GPU (GeForce RTX 2070) for Counter-Strike 2. The Xeon W-1370 is 32% above the recommended CPU (Core i7-9700K).

⚙️Bottleneck Analysis

The Xeon W-1370 determines the performance ceiling at all 1080p settings, all 1440p settings, all 4k settings, while the GPU has headroom.

💰Value Analysis

Approximated average price on current market:

GeForce RTX 4090:$1649(updated 2/6/2026)
Official Launch Price: $1599
Xeon W-1370:$323(updated 2/9/2026)
Official Launch Price: $323

Combo price: $1972. At 1080p Ultra, this combo delivers 307 FPS, equivalent to 0.16 FPS per dollar.

ResolutionLowMediumHighUltra
1080p0.227 fps/$0.195 fps/$0.163 fps/$0.156 fps/$
1440p0.231 fps/$0.197 fps/$0.170 fps/$0.146 fps/$
4k0.165 fps/$0.148 fps/$0.132 fps/$0.111 fps/$

* Table values represent FPS per Dollar (higher is better)

Performance Limiter Analysis

Xeon W-1370|GeForce RTX 4090
📈Analysis

At 1080p low, the Xeon W-1370 sets the ceiling at about 441 FPS, while the GeForce RTX 4090 could reach 700 FPS. In this scenario, the CPU limits the GPU potential by 37% (FPS gap: 259 FPS). Overall distribution: CPU limits 12/12 cells, GPU limits 0/12, balanced 0/12.

Verdict

CPU Limits GPU

Your Xeon W-1370 is the limiting side in the heaviest mismatch. This means part of the GeForce RTX 4090 rendering potential remains unused in those settings.

🧩Detailed Breakdown
1080p (Full HD)
LowCPU Limits GPU 37%
MediumCPU Limits GPU 37%
HighCPU Limits GPU 35%
UltraCPU Limits GPU 30%
1440p (2K QHD)
LowCPU Limits GPU 28%
MediumCPU Limits GPU 26%
HighCPU Limits GPU 24%
UltraCPU Limits GPU 22%
4K (Ultra HD)
LowCPU Limits GPU 24%
MediumCPU Limits GPU 26%
HighCPU Limits GPU 21%
UltraCPU Limits GPU 22%
Percentages show how much potential FPS of the stronger component is lost because the other component has a lower FPS ceiling.
🧠Methodology

We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.

Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.

CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.

The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.

📊Predicted Hardware Utilization for Xeon W-1370 and GeForce RTX 4090

1080p (Full HD)

Low
CPU51% - 77%
<>
GPU16% - 34%
<>
Medium
CPU44% - 75%
<>
GPU23% - 51%
<>
High
CPU42% - 72%
<>
GPU25% - 51%
<>
Ultra
CPU42% - 65%
<>
GPU27% - 53%
<>

1440p (2K QHD)

Low
CPU40% - 50%
<>
GPU46% - 58%
<>
Medium
CPU35% - 50%
<>
GPU71% - 90%
<>
High
CPU34% - 49%
<>
GPU75% - 93%
<>
Ultra
CPU33% - 44%
<>
GPU76% - 94%
<>

4K (Ultra HD)

Low
CPU36% - 38%
<>
GPU45% - 89%
<>
Medium
CPU32% - 35%
<>
GPU85% - 90%
<>
High
CPU30% - 36%
<>
GPU86% - 93%
<>
Ultra
CPU30% - 35%
<>
GPU85% - 93%
<>

Performance Summary

The Xeon W-1370 + GeForce RTX 4090 pairing runs this title with CPU utilization between 30% and 77% and GPU utilization between 16% and 94%. Xeon W-1370 stays in a controlled operating range, while GeForce RTX 4090 becomes the primary limiter at high visual load. As resolution scales, average GPU load rises from 35% at 1080p to 84% at 4K, while CPU averages move from 59% to 34%.

Bottleneck Analysis

This profile is GPU-bound. At 4K (Ultra HD) High, the GeForce RTX 4090 averages 90% usage (86-93%), while the Xeon W-1370 stays at 33% (30-36%), indicating the graphics pipeline is the limiting stage.

Resolution Scaling

At 1080p, averages sit around CPU 59% and GPU 35%. At 1440p, that shifts to CPU 42% and GPU 75%, and at 4K it reaches CPU 34% and GPU 84%. This shows that workload scaling is present on both components, with stronger pressure on the GPU.

Optimal Settings Recommendation

4K (Ultra HD) Medium is the most balanced preset based on this dataset. It runs around CPU 34% (32-35%) and GPU 88% (85-90%), which keeps GeForce RTX 4090 well utilized without constant max-out behavior while Xeon W-1370 remains stable for consistent frame delivery.

Upgrade Insight

Current utilization does not show an urgent upgrade requirement for either component; the Xeon W-1370 and GeForce RTX 4090 remain reasonably matched for this title.

Understanding Hardware Utilization & Bottlenecks: These percentages represent how much of your component's maximum processing power is actively being used during gameplay. This is the key to identifying performance bottlenecks in any system.

  • The Ideal Scenario (GPU Bottleneck): You typically want to see High GPU Utilization (90%+) and moderate CPU usage. This indicates your system is successfully pushing out graphics as fast as it can, without being held back by the CPU.
  • CPU Bottleneck: If you see High CPU Utilization (85%+) paired with lower GPU utilization, the CPU is struggling to compute game logic and prepare frames fast enough. The GPU sits waiting, often resulting in stuttering, inconsistent frame times, and lower overall FPS.
  • Engine Limits or Capped FPS: If both CPU and GPU utilization are relatively low, it means the hardware is waiting on something else. This could be a game engine limitation, poorly optimized code, or an artificial framerate cap like VSync holding performance back.

Data generated by our Machine Learning engine trained on real-world benchmarks. Shows the approximate average utilization at each setting.

Counter-Strike 2 Requirements Comparison

See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.

CPU - Xeon W-1370
cpu icon
22,948
Your Score
MinimumCore i5 750
RecommendedCore i7-9700K
GPU - GeForce RTX 4090
gpu icon
38,112
Your Score
MinimumGeForce GTX 660
RecommendedGeForce RTX 2070

Your CPU is 32% above and your GPU is 136% above the recommended specs. High/Ultra at 1080p. Lower settings for higher resolutions.

CPU

+32%vsrecommended

GPU

+136%vsrecommended

CPU

+801%vsminimum

GPU

+843%vsminimum

Minimum Requirements
Video Card: GeForce GTX 660
Processor: Core i5 750
Memory: 8 GB
Disk Space: 85 GB
System: Windows 10
Recommended Requirements
Video Card: GeForce RTX 2070
Processor: Core i7-9700K
Memory: 16 GB
Disk Space: 85 GB (SSD)
System: Windows 10 64-bit

Frequently Asked Questions

1Can the Xeon W-1370 and GeForce RTX 4090 run Counter-Strike 2 well?

Yes, the Xeon W-1370 paired with the GeForce RTX 4090 can run Counter-Strike 2 smoothly up to 4k achieving around 218 FPS at Ultra quality. Your GPU is 136% above the recommended specs, and your CPU is 32% above the recommended requirements.

2Is there a more cost-effective setup to run Counter-Strike 2?

This CPU + GPU combo costs approximately $1972 ($323 CPU (Rank #115 Value) + $1649 GPU (Rank #77 Value)). Since the CPU is the main limiting factor, investing in a stronger processor will improve your framerates and overall value. For example, the Xeon Platinum 8454H is a great upgrade option for around $6540 (Rank #1 for value).

3Which component should I upgrade first to improve Counter-Strike 2 performance?

For Counter-Strike 2, upgrading the CPU would have the biggest impact on performance. The Xeon W-1370 is currently the limiting factor — the GeForce RTX 4090 has extra headroom that a faster processor could take advantage of. This is especially noticeable at 1080p where CPU performance matters more. CPU-limited at: 1080p low, 1080p medium, 1080p high, 1080p ultra, 1440p low, 1440p medium, 1440p high, 1440p ultra, 4k low, 4k medium, 4k high, 4k ultra.

4Does this setup support Frame Generation for Counter-Strike 2?

Counter-Strike 2 does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.

5What are the minimum and recommended specs for Counter-Strike 2?

Counter-Strike 2 requires at minimum a Core i5 750 (CPU) and GeForce GTX 660 (GPU) with 8 GB RAM and 85 GB storage. For the recommended experience, you need a Core i7-9700K and GeForce RTX 2070 with 16 GB RAM. Your Xeon W-1370 and GeForce RTX 4090 both exceed the recommended specs, so you're well-positioned for a great experience.

6How accurate are these Counter-Strike 2 FPS estimates for the Xeon W-1370 and GeForce RTX 4090?

These Counter-Strike 2 FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.

Performance estimates are based on synthetic benchmarks and hardware capabilities.

Results may vary based on drivers, OS, and background processes.