Uses the stable Tiger engine. It has dropped support for older OSs and requires significant storage space. A decent CPU is needed for raids and activities with many enemies.
Actual FPS may vary based on RAM speed, background processes, and other system factors
Performance Report
At 1080p, all quality settings exceed 210 FPS, suitable for 144Hz+ monitors. At 1440p, all settings exceed 176 FPS. At 4K, all settings exceed 103 FPS.
The GeForce RTX 4090 is 295% above the recommended GPU (GeForce GTX 970) for Destiny 2. The Xeon W-2135 is 11% above the recommended CPU (Core i5-2400).
The Xeon W-2135 sets the FPS ceiling at all 1080p settings, all 1440p settings, all 4k settings, while the GeForce RTX 4090 still has headroom.
This section is based on estimated CPU/GPU FPS ceilings, not utilization percentages.
At 1080p ultra, the Xeon W-2135 sets the ceiling at about 211 FPS, while the GeForce RTX 4090 could reach 295 FPS. In this scenario, the CPU limits the GPU potential by 28% (FPS gap: 84 FPS). Overall distribution: CPU limits 12/12 cells, GPU limits 0/12, balanced 0/12.
Your Xeon W-2135 is the limiting side in the heaviest mismatch. This means part of the GeForce RTX 4090 rendering potential remains unused in those settings.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU Limits GPU 19% | CPU Limits GPU 26% | CPU Limits GPU 25% | CPU Limits GPU 28% |
| 1440p (2K QHD) | CPU Limits GPU 22% | CPU Limits GPU 27% | CPU Limits GPU 23% | CPU Limits GPU 26% |
| 4K (Ultra HD) | CPU Limits GPU 16% | CPU Limits GPU 28% | CPU Limits GPU 27% | CPU Limits GPU 26% |
We estimate the maximum FPS the processor can sustain and the maximum FPS the graphics card can sustain in each setting, then compare those limits directly.
Limit Factor formula: (stronger - weaker) / stronger. Example: if CPU ceiling is 200 FPS and GPU ceiling is 140 FPS, then GPU limits CPU by 30%.
CPU Limits GPU means the processor ceiling is lower. GPU Limits CPU means the graphics ceiling is lower. Balanced means the FPS ceilings are close enough that the gap is negligible.
A component can still be the FPS limiter without reaching 100% utilization. The displayed percentages are derived from FPS ceilings, not generic utilization heuristics.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p (Full HD) | CPU1% - 18% <> GPU74% - 94% <> | CPU1% - 18% <> GPU74% - 94% <> | CPU21% - 41% <> GPU87% - 97% <> | CPU17% - 36% <> GPU92% - 97% <> |
| 1440p (2K QHD) | CPU4% - 25% <> GPU76% - 95% <> | CPU4% - 25% <> GPU76% - 95% <> | CPU18% - 42% <> GPU95% - 100% <> | CPU15% - 36% <> GPU99% - 100% <> |
| 4K (Ultra HD) | CPU2% - 23% <> GPU76% - 95% <> | CPU2% - 23% <> GPU76% - 95% <> | CPU15% - 41% <> GPU95% - 100% <> | CPU11% - 36% <> GPU99% - 100% <> |
The Xeon W-2135 + GeForce RTX 4090 pairing runs this title with CPU utilization between 1% and 42% and GPU utilization between 74% and 100%. Xeon W-2135 keeps significant headroom across presets, while GeForce RTX 4090 carries most of the graphics load at heavier visual settings. As resolution scales, average GPU load rises from 89% at 1080p to 93% at 4K, while CPU averages move from 19% to 19%.
From a utilization perspective, this is a GPU-heavy load profile. At 1440p (2K QHD) Ultra, the GeForce RTX 4090 averages 100% usage (99-100%), while the Xeon W-2135 stays at 26% (15-36%). This shows the graphics pipeline is carrying most of the workload, but utilization alone does not define the FPS limiter.
At 1080p, averages sit around CPU 19% and GPU 89%. At 1440p, that shifts to CPU 21% and GPU 93%, and at 4K it reaches CPU 19% and GPU 93%. This shows that workload scaling is limited, which can indicate engine-side constraints.
1440p (2K QHD) Low is the most balanced preset based on this dataset. It runs around CPU 14% (4-25%) and GPU 86% (76-95%), which keeps GeForce RTX 4090 well utilized without constant max-out behavior while Xeon W-2135 remains stable for consistent frame delivery.
Upgrade priority should be the GPU. The GeForce RTX 4090 reaches 100% average load at 1440p (2K QHD) Ultra while the Xeon W-2135 still has headroom, so a faster graphics card would deliver the largest uplift.
Understanding Hardware Utilization: These percentages represent how much of your component's maximum processing power is actively being used during gameplay. They describe hardware load, but they do not directly tell you which component sets the FPS ceiling.
Important: a CPU or GPU can still be the FPS limiter without reaching 100% utilization. Two processors can both show 40% usage and still deliver very different frame rates, depending on per-core speed, cache, engine threading, driver overhead, and frame preparation efficiency.
Data generated by our Machine Learning engine trained on real-world benchmarks. Shows the approximate average utilization at each setting.
See how your processor and graphics card compare against the game official minimum and recommended system specs. The placement of your hardware is calculated using relative synthetic performance scores to help you gauge overall playability.
Your CPU is 11% above and your GPU is 295% above the recommended specs. High/Ultra at 1080p. Lower settings for higher resolutions.
+11%vsrecommended
+295%vsrecommended
+352%vsminimum
+843%vsminimum
Yes, the Xeon W-2135 paired with the GeForce RTX 4090 can run Destiny 2 smoothly up to 4k achieving around 103 FPS at Ultra quality. Your GPU is 295% above the recommended specs, and your CPU is 11% above the recommended requirements.
Price data is not currently available for this combination. In general, look for setups where the CPU and GPU are balanced — this ensures you're not overspending on one component that the other can't keep up with.
For Destiny 2, upgrading the CPU would have the biggest impact on performance. The Xeon W-2135 is currently the limiting factor — the GeForce RTX 4090 has extra headroom that a faster processor could take advantage of. This is especially noticeable at 1080p where CPU performance matters more. CPU-limited at: 1080p low, 1080p medium, 1080p high, 1080p ultra, 1440p low, 1440p medium, 1440p high, 1440p ultra, 4k low, 4k medium, 4k high, 4k ultra.
Destiny 2 does not currently support Frame Generation technologies like DLSS 3 or FSR 3. Your performance is based entirely on native rendering. If the game adds support in a future update, newer GPUs will benefit the most.
Destiny 2 requires at minimum a Core i3-3250 (CPU) and GeForce GTX 660 (GPU) with 6 GB RAM and 105 GB storage. For the recommended experience, you need a Core i5-2400 and GeForce GTX 970 with 8 GB RAM. Your Xeon W-2135 and GeForce RTX 4090 both exceed the recommended specs, so you're well-positioned for a great experience.
These Destiny 2 FPS results are not arbitrary numbers. They come from calculations informed by thousands of real gaming benchmarks, and the typical accuracy range is around 10% to 15%. That makes them far more useful than generic FPS calculators that simply invent values without a benchmark foundation. Actual in-game performance can still vary with drivers, updates, RAM configuration, cooling, and the exact scene being rendered.
Performance estimates are based on synthetic benchmarks and hardware capabilities.
Results may vary based on drivers, OS, and background processes.
